1. 제품 오버view
The Alphacool Eisbaer Aurora 280 is an all-in-one (AIO) liquid cooling system designed for CPU cooling. It features a copper radiator and an integrated pump with addressable RGB LED lighting. The system utilizes durable TPV hoses and G1/4" fittings, allowing for expandability and refilling. The pump and fans are equipped with digital RGB LEDs for customizable lighting effects.
Image 1.1: The Alphacool Eisbaer Aurora 280 CPU Liquid Cooler, showcasing its radiator, fans, and pump block with active RGB lighting.
2. 패키지 내용
설치를 시작하기 전에 모든 구성 요소가 있는지 확인하십시오. 패키지에는 일반적으로 다음이 포함됩니다.
- Radiator with integrated pump and reservoir
- Two 140mm Aurora LUX Pro fans
- Mounting hardware for various Intel sockets (775, 1056, 1155, 1150, 1151)
- 열 페이스트
- Digital RGB controller and cables
- 사용자 설명서(본 문서)
Image 2.1: Included mounting hardware, thermal paste, and cables for the Alphacool Eisbaer Aurora 280.
3. 설치 가이드
This section provides general guidelines for installing the Alphacool Eisbaer Aurora 280 CPU liquid cooler. Refer to the detailed online manual for specific steps related to your CPU socket type.
3.1. 준비
- 시스템의 전원이 꺼져 있고 전원에서 분리되어 있는지 확인하십시오.
- Prepare your CPU socket by cleaning the CPU surface and applying thermal paste (if not pre-applied).
- Identify the correct mounting brackets and screws for your motherboard's CPU socket.
3.2. 라디에이터 및 팬 설치
- Mount the two 140mm fans to the radiator using the provided screws. Ensure the fan airflow direction is appropriate for your case's cooling setup (intake or exhaust).
- Install the radiator assembly into an available 280mm fan mount location in your PC case.
Image 3.1: The radiator and fans of the Eisbaer Aurora 280, ready for installation into a PC case.
3.3. Pump Block Installation
- Secure the appropriate backplate (if required) to the rear of your motherboard.
- Position the pump block over the CPU, aligning it with the mounting holes.
- Fasten the pump block to the motherboard using the designated screws and standoffs. Tighten screws evenly in a cross pattern to ensure proper contact pressure.
Image 3.2: The copper cold plate of the pump block, which makes direct contact with the CPU.
3.4. 케이블 연결
- Connect the pump's power cable to a SATA power connector from your power supply.
- Connect the fan PWM cables to available 4-pin fan headers on your motherboard or to a fan controller. Note: A fan splitter may be required if your motherboard has insufficient headers.
- Connect the digital RGB cables from the pump and fans to a compatible 3-pin JST + 3-pin 5V digital RGB header on your motherboard or an external RGB controller.
4. 사용 설명서
4.1. 초기 시작
Upon first power-up, the pump may produce some noise as air bubbles are cleared from the loop. This is normal and should subside within a few minutes. Monitor CPU temperatures to ensure proper cooling.
4.2. RGB 조명 제어
The Eisbaer Aurora 280 features addressable RGB lighting on both the pump and fans. Control the lighting effects and colors using:
- 메인보드 소프트웨어: If connected to a compatible motherboard's digital RGB header, use the motherboard manufacturer's RGB control software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion).
- External RGB Controller: If using an external digital RGB controller, refer to the controller's specific instructions for customization.
Image 4.1: The Eisbaer Aurora 280 with its digital RGB lighting active on both fans and pump block.
5. 유지관리
정기적인 유지보수는 액체 냉각 시스템의 최적 성능과 수명 연장을 보장합니다.
5.1. 먼지 청소
- 주기적으로 압축 공기나 부드러운 브러시를 사용하여 라디에이터 핀과 팬 블레이드의 먼지를 청소하십시오. 과도한 먼지는 공기 흐름을 방해하고 냉각 효율을 떨어뜨릴 수 있습니다.
5.2. Coolant Refilling and Expansion
The Eisbaer Aurora 280 is designed to be refillable and expandable.
- 리필: Over time, a small amount of coolant may evaporate. The pump block features a fill port (typically a screw on top) for adding coolant. Use only Alphacool-approved coolants to prevent corrosion or damage.
- 확장: The system uses G1/4" fittings and quick-release fasteners, allowing for easy integration into a larger custom loop or expansion with additional components like GPU blocks or extra radiators.
Image 5.1: The top of the pump block, showing the fill port for coolant maintenance.
6. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 높은 CPU 온도 |
|
|
| Pump Noise/Grinding Sound |
|
|
| RGB 조명이 작동하지 않음 |
|
|
7. 기술 사양
| 구성 요소/기능 | 사양 |
|---|---|
| 라디에이터 크기 (길이 x 너비 x 높이) | 313.5 x 144 x 30mm |
| 라디에이터 재질 | Full Copper |
| 튜브 치수 | 12.7/6.7mm |
| 튜브 재질 | Thermoplastic vulcanisates, EPDM/PP |
| Pump Housing Dimensions (L x W x H) | 66 x 66 x 69mm |
| 펌프 속도 | 2600 분당 |
| 펌프 볼륨tage | 7~13.5V 직류 |
| 펌프 전력 소비량 | 4W |
| 팬 크기 | 140 x 140 x 25mm |
| 팬 속도 | 600~1500rpm |
| 정압 | 0.41 - 1.6 mm H2O |
| 공기 흐름 속도 | 27 - 71 m³/h |
| 팬 베어링 | 유압 |
| 팬 커넥터 | 4 핀 PWM |
| Digital RGB Connection | 3핀 JST + 3핀 5V |
| 호환 가능한 인텔 소켓 | 775 / 1056 / 1155 / 1150 / 1151 |
8. 보증 및 지원
For warranty information and technical support, please refer to the official Alphacool web사이트를 방문하거나 판매점에 문의하세요. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
중요한: The warranty period and support procedures may vary by region and retailer. Always consult the specific terms provided at the time of purchase.
