소개
구매해주셔서 감사합니다asing the Amewi 22431 ACV730 1:14 Scale RC Tracked Excavator. This sophisticated and high-quality replica of a heavy tracked excavator offers a realistic operating experience with high fidelity to detail and premium materials. This manual provides essential information for safe operation, setup, maintenance, and troubleshooting to ensure you get the most out of your model.
Image: The Amewi ACV730 RC Tracked Excavator, showcasin정교한 설계와 견고한 구조를 갖추고 있기 때문입니다.
안전 경고
- 연령 권장 사항: This product is suitable for children aged 8 years and older. Adult supervision is recommended.
- 배터리 안전: Use only the specified Li-Ion battery (7.4V, 1200mAh, JST-BEC plug). Do not mix old and new batteries, or different types of batteries. Always remove batteries when not in use for extended periods.
- 충전 중: Charge batteries using the provided USB charging cable only. Do not overcharge.
- 운영 환경: The model is designed for outdoor use with splash water protection. Avoid operating in heavy rain or extreme wet conditions. Keep away from water bodies.
- 움직이는 부품: Keep fingers, hair, and loose clothing away from moving parts such as tracks and the excavator arm to prevent injury.
- 간섭: The 2.4 GHz control system minimizes interference, but avoid operating near other radio-controlled devices to ensure optimal control.
- 과부하 보호: The transmission parts in the arms are equipped with overload protection. Do not force movements if resistance is encountered.
패키지 내용
모든 품목이 들어 있는지 확인하려면 패키지 내용물을 확인하세요.
- Amewi ACV730 RC Tracked Excavator (1:14 Scale)
- 2.4 GHz Remote Control (European standard)
- USB 충전 케이블
- Instruction Manual (German/English)
Note: The 7.4V Li-Ion 1200mAh battery for the excavator and batteries for the remote control are not included and must be purchased separately.
설정
1. Battery Installation (Excavator)
- Locate the battery compartment on the excavator, typically under a removable cover on the chassis or rear.
- 배터리 덮개를 엽니다.
- Connect the 7.4V Li-Ion 1200mAh battery (JST-BEC plug) to the excavator's power connector. Ensure correct polarity.
- 배터리를 조심스럽게 배터리 칸에 넣고 덮개를 단단히 닫으십시오.
Image: The 7.4V Li-Ion 1200mAh battery pack with its JST-BEC connector, used to power the excavator.
2. 배터리 설치(리모컨)
- 리모콘 뒷면에서 배터리함을 찾으세요.
- 배터리 덮개를 엽니다.
- Insert the required batteries (e.g., AA or AAA, refer to remote control markings) into the compartment, observing the correct polarity (+/-).
- 배터리 덮개를 단단히 닫으세요.
Image: The 2.4 GHz remote control for the Amewi ACV730 excavator, showing its dual joysticks and control buttons.
3. 굴삭기 배터리 충전
- Connect the JST-BEC plug of the excavator battery to the USB charging cable.
- USB 충전 케이블을 적합한 USB 전원(예: 컴퓨터 USB 포트, USB 벽면 어댑터)에 꽂습니다.
- USB 케이블의 충전 표시등은 충전 상태를 보여줍니다(예: 빨간색은 충전 중, 녹색은 완충).
- Charging typically takes a few hours. Do not leave unattended during charging.
작동 지침
1. 전원 켜기/끄기
- Turn on the remote control first using its power switch.
- Turn on the excavator using its power switch (usually located near the battery compartment or under the cabin).
- The remote control and excavator should automatically pair. An indicator light on both devices will confirm successful pairing.
- To power off, turn off the excavator first, then the remote control.
2. Basic Controls (European Standard)
The remote control features a European standard control layout, similar to real excavators, allowing for precise and independent control of various functions.
- 왼쪽 조이스틱: Controls the movement of the tracks (forward, backward, left, right). Tracks are individually controllable for realistic maneuvering.
- 오른쪽 조이스틱: Controls the excavator arm and bucket movements (up, down, extend, retract, scoop, dump).
- 포탑 회전: Use dedicated buttons or a specific joystick input to rotate the turret 360 degrees.
- 빛과 소리: Activate realistic light and sound effects using designated buttons on the remote control.
- 기타 기능: Explore the 22 available functions through various button combinations or additional controls on the remote. Refer to the remote control diagram in the included manual for specific button assignments.
이미지: 위에서 아래로 view of the excavator's cabin and arm, illustrating the range of motion and detailed components.
Image: Close-up of the excavator arm's hydraulic-like mechanism, demonstrating its articulation.
유지
1. 청소
- After each use, especially outdoors, gently wipe down the excavator with a soft, dry cloth to remove dirt and dust.
- 완고한 먼지의 경우 약간 damp 천을 사용할 수는 있지만, 전자 부품에 물이 들어가지 않도록 주의하십시오.
- Clean the tracks regularly to prevent debris from hindering movement.
2. 보관
- 굴삭기와 리모컨은 직사광선과 극한 온도 변화를 피해 서늘하고 건조한 곳에 보관하십시오.
- Remove all batteries from both the excavator and the remote control if storing for an extended period to prevent leakage.
문제 해결
- Excavator not responding:
- Ensure both the excavator and remote control are powered on.
- 두 기기의 배터리가 완전히 충전되었는지, 그리고 올바르게 설치되었는지 확인하십시오.
- Verify that the remote control and excavator are properly paired.
- Weak performance or short runtime:
- The excavator battery may need recharging.
- Remote control batteries may be low and need replacement.
- Arm or bucket not moving correctly:
- Check for any obstructions in the arm or bucket mechanism.
- Ensure the overload protection has not been triggered. Reduce the load if attempting to lift heavy objects.
- 작동 중 간섭 발생:
- Move to an area away from other radio-controlled devices or strong electromagnetic sources.
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | 22431 |
| 상표 | 아메위 |
| 규모 | 1시 14분 |
| 치수(길이 x 너비 x 높이) | 61 x 34.5 x 24cm |
| 무게 | 2.33kg (배터리 포함) |
| 재료 | Plastic (with metal shovel) |
| 제어 시스템 | 2.4 GHz European Standard |
| 기능 | 22 functions, 360° turret rotation, realistic light and sound |
| 최대 속도 | 약 5km/h |
| 굴삭기 배터리 | 7.4V Li-Ion, 1200 mAh, JST-BEC plug (approx. 20 min runtime) |
| 충전 중 | USB 케이블을 통해 |
| 연령 권장 사항 | 8세 이상 |
보증 및 지원
For warranty information, technical support, or spare parts inquiries, please contact Amewi customer service directly. Refer to the contact details provided on the product packaging or the official Amewi web해당 사이트입니다. 고객 지원팀에 문의하실 때는 모델 번호(22431)와 구매 증빙 자료를 준비해 주시기 바랍니다.
