Elitech GSP-6G 디지털 온도 및 습도 데이터 로거 사용자 설명서

1. 서론

The Elitech GSP-6G data logger is an advanced device designed for precise temperature and humidity monitoring. It is primarily utilized for recording environmental conditions of sensitive items such as pharmaceuticals, vaccines, medicines, and chemicals. The device features a propylene glycol bottle external temperature sensor, which acts as a thermal buffer to provide more accurate and stable readings, mimicking real-world storage conditions.

Key features include two data saving modes (full record stop and cyclic record), an over-limit sound-light alarm, and the ability to automatically shorten the record interval when temperature or humidity limits are exceeded. For convenient placement, the data logger is equipped with two built-in magnets on its surface.

Figure 1: Elitech GSP-6G Digital Data Logger with connected probes. The display shows current temperature, humidity, and the number of recorded data points.

2. 패키지 내용

The Elitech GSP-6G package includes the following items:

• 1x Elitech GSP-6G Data Logger
• 1x Propylene Glycol Bottle Temperature Sensor
• 1x Temperature-Humidity Combined Sensor
• 1x USB 케이블
• 1x 사용자 설명서
• 1x Calibration Certificate

Figure 2: All components included in the Elitech GSP-6G product package.

3. 사양

Figure 3: The GSP-6G features a wide measurement range and large record capacity.

4. 설정

4.1. 장치 활성화

1. Remove the battery cover from the back of the device.
2. 배터리 절연체 스트립을 빼냅니다.
3. 배터리를 다시 설치하고 덮개를 교체합니다.

For a visual guide on device activation, refer to the video below (0:08-0:24).

4.2. 프로브 설치

1. Connect the temperature and humidity sensor to the larger inlet (labeled 'H').
2. Connect the temperature sensor (glycol bottle probe) to the smaller inlet (labeled 'T').

For a visual guide on probe installation, refer to the video below (0:28-0:43).

Figure 4: Labeled components of the Elitech GSP-6G data logger.

4.3. Software Download and Installation

1. 공식 Elitech 웹사이트를 방문하세요. web대지: www.엘리테쿠스.com.
2. Navigate to the 'Products' section and look for 'Elitechlog Software' in the category list.
3. Download the appropriate software file for your operating system (Windows or Mac). Mac users can also search for "ElitechLog" in the App Store.
4. 다운로드한 설치 프로그램을 실행하고 화면의 지시에 따라 소프트웨어 설치를 완료하십시오.

For a visual guide on software download and installation, refer to the video below (0:46-1:18).

4.4. Connecting the Device to a Computer

1. Connect the data logger to your computer using the provided USB cable.
2. Ensure a small computer icon appears on the logger's display, indicating a successful connection.

For a visual guide on connecting the device to a computer, refer to the video below (1:22-1:33).

5. 사용 설명서

5.1. Connecting to the Software

1. Open the Elitechlog software on your computer.
2. The device model number should appear at the bottom left of the software interface, confirming a successful connection.

For a visual guide on connecting to the software, refer to the video below (1:36-1:44).

5.2. 매개변수 설정

You can either use default parameters or customize them:

• Using Default Parameters: If you prefer default settings and only need to synchronize the local time, stay on the "Summary" page and click "Quick Reset". This will synchronize the device's time with your computer's.
• Customizing Parameters: For custom settings, navigate to the "Parameter" page in the software.

For a visual guide on setting parameters, refer to the video below (1:50-2:08).

5.3. 로깅 간격

On the "Parameter" page, select your preferred logging interval. This determines how frequently the device records a data point. The estimated maximum recording duration will change based on the interval you set.

For a visual guide on setting the logging interval, refer to the video below (2:11-2:28).

5.4. Alarm Logging Interval Shorten

Enable this feature to automatically shorten the logging interval to 1 minute when an alarm is triggered, providing more detailed data during critical events.

For a visual guide on this feature, refer to the video below (2:35-2:40).

5.5. Sensor Type Selection

Choose the appropriate sensor type based on your monitoring needs:

• Temp (Probe T) + Humi (Probe H): Monitors both temperature and humidity simultaneously using the combined sensor.
• Temp (Probe T) + Temp (Probe H): Monitors temperature at two different spots using both the temperature probe and the combined sensor (only the temperature aspect of the combined sensor is used).
• Temp + Humi (Probe H Only): Monitors both temperature and humidity using only the combined sensor.

For a visual guide on selecting sensor type, refer to the video below (2:44-3:17).

5.6. Button Stop

Enable or disable the ability to stop logging by pressing and holding the button on the device.

For a visual guide on enabling/disabling button stop, refer to the video below (3:20-3:25).

5.7. 시작 지연

Set a delay period (in hours) before logging begins after the device is removed from the computer. Logging will commence once the set delay time has elapsed.

For a visual guide on setting the start delay, refer to the video below (3:28-3:41).

5.8. Screen Display Time

Configure how long the device's screen remains active. Options typically include "Always On" or specific time durations (e.g., 15s, 30s, 60s).

For a visual guide on setting the screen display time, refer to the video below (3:45-3:48).

5.9. 온도 단위

Select your preferred temperature unit: Celsius (℃) or Fahrenheit (℉).

For a visual guide on setting the temperature unit, refer to the video below (3:51-3:57).

5.10. 저장 모드

Choose how the device handles data when its memory is full:

• Circular Logging: The logger will continue recording data, overwriting the oldest data points with new ones.
• Stop when full: The logger will cease recording once it reaches its maximum capacity of 16,000 data points.

For a visual guide on setting the storage mode, refer to the video below (4:04-4:21).

5.11. 교정

The calibration feature allows you to adjust temperature and humidity readings for specific situations. If no specific adjustments are needed, leave the calibration values at 0.

For a visual guide on calibration, refer to the video below (4:25-4:35).

5.12. Display Maximum and Minimum

Choose whether to display the maximum and minimum values by the current day or by the entire recording cycle.

For a visual guide on display settings, refer to the video below (4:41-4:47).

5.13. Audible Alarm Settings

Configure the audible alarm frequency (e.g., 3 times, 10 times) and the interval between repeated alarms (e.g., 5M, 10M, 20M, 30M).

For a visual guide on audible alarm settings, refer to the video below (4:49-5:05).

5.14. 음소거 버튼

Enable or disable the sound feedback for button operations.

For a visual guide on the mute button, refer to the video below (5:06-5:10).

5.15. 경보 제한

Set the upper and lower limits for temperature and humidity alarms. If readings fall outside this range, data in the report will be highlighted in red.

For a visual guide on setting alarm limits, refer to the video below (5:15-5:23).

5.16. Save Parameters

After configuring all desired settings, click "Save Parameter" in the software. This action will also synchronize the local time with the device.

For a visual guide on saving parameters, refer to the video below (5:27-5:32).

5.17. Date & Time Format and Language

In the software, you can set the preferred date and time format, as well as the display language for the device and reports.

For a visual guide on setting date/time/language, refer to the video below (5:37-5:40).

5.18. Starting Logging

1. 컴퓨터에서 장치를 분리합니다.
2. Press and hold the button on the device for 5 seconds until a solid triangle (▶) appears on the screen. This indicates that logging has started.

For a visual guide on starting logging, refer to the video below (5:44-5:51).

5.19. Stopping Logging

1. Via Device Button: If the "Button Stop" feature is enabled, press and hold the button on the device for 5 seconds until the solid triangle (▶) turns into a solid square (■).
2. Via Software: If "Button Stop" is disabled, connect the device to the computer, open the Elitechlog software, and click "Stop Logging" on the "Summary" page.

For a visual guide on stopping logging, refer to the video below (5:54-6:17).

5.20. Exporting Report

1. Connect the device to the computer and open the Elitechlog software.
2. Navigate to the "Graph" page.
3. Click the "Export Data" button at the bottom of the page to save the data report in your desired format (e.g., PDF, XLS, TXT).

For a visual guide on exporting reports, refer to the video below (6:21-6:37).

5.21. Restarting Logging

Please note that the logger cannot be restarted directly once it has been stopped. To initiate a new logging session, the device must be reset via the software.

• If you do not need to change parameters, click "Quick Reset" on the "Summary" page.
• If you need to adjust parameters, go to the "Parameter" page, make your changes, and then click "Save Parameter" to reset the device.

After being reset, the logger will be ready to start a new logging session as described in section 5.18.

For a visual guide on restarting logging, refer to the video below (6:40-7:12).

5.22. Min/Max Interface and Alarm Indicators

Press the button once on the device to toggle through the display of minimum, maximum, and average recorded data. You can also view the set alarm thresholds (high/low limits) and observe alarm indicators (red light + beeps) when limits are exceeded.

For a visual guide on the Min/Max interface and alarm indicators, refer to the video below (7:16-8:06).

5.23. General Operation Guide Video

포괄적인 이상을 위해view of the Elitech GSP-6G's operation, including specific applications like vaccine monitoring, please refer to the official operation guide video below.

6. 유지관리

To ensure optimal performance and longevity of your Elitech GSP-6G data logger, follow these simple maintenance guidelines:

• 청소: Wipe the device clean with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the casing 또는 디스플레이.
• 배터리 교체: Replace the 3.6V lithium battery as needed. Refer to section 4.1 for instructions on accessing the battery compartment.
• 센서 관리: Handle the external sensors with care. Avoid bending or damaging the cables. Ensure the glycol bottle is securely sealed.

7. 문제 해결

If you encounter issues with your Elitech GSP-6G data logger, consider the following:

• Device Not Activating: Ensure the battery insulator strip has been completely removed and the battery is correctly installed.
• No Computer Connection: Verify that the USB cable is securely connected to both the device and the computer. Check if the small computer icon appears on the logger's display. Reinstall the Elitechlog software drivers if necessary.
• Logging Not Starting: Confirm that you have pressed and held the button for 5 seconds until the solid triangle (▶) appears. If a start delay is configured, logging will begin after the set time.
• Logging Not Stopping: If the device button does not stop logging, connect to the software and use the "Stop Logging" function on the "Summary" page. Ensure the "Button Stop" feature is enabled in the parameters if you wish to use the physical button.
• 부정확한 판독: Consider performing a calibration via the Elitechlog software if you suspect readings are consistently off. Ensure sensors are properly connected and placed in the desired monitoring environment.
• Device Not Restarting Logging: Remember that the logger requires a software reset (Quick Reset or Save Parameter) after stopping a session before it can start a new one.

8. 보증 및 지원

The Elitech GSP-6G data logger comes with a 12개월 보증. For any technical assistance, questions, or support, please contact Elitech customer support.

고객 지원:

• 이메일: support@eltechus.com
• 핸드폰: Available 24/7 (refer to Elitech's official website for specific phone numbers)