1. 제품 오버view
The VIVOTEK FD9360-H is a high-performance H.265 outdoor dome network camera designed for robust surveillance applications. It features a 2-Megapixel sensor, delivering clear resolution of 1920x1080 at 30 frames per second. Equipped with VIVOTEK's SNV (Supreme Night Visibility) and WDR Pro (Wide Dynamic Range Pro) technologies, this camera excels in capturing high-quality imagery across various lighting conditions, including high contrast and low light environments. The FD9360-H utilizes a 2.8mm lens and integrates IR illuminators for enhanced night vision capabilities, making it suitable for continuous outdoor monitoring.
Figure 1: VIVOTEK FD9360-HF2 2MP IR Outdoor Fixed Dome Network Camera. This image shows the white dome-shaped camera with the VIVOTEK logo on top. The clear dome cover reveals the camera lens and infrared LEDs inside. A white cable extends from the back of the camera, ending in an RJ45 connector.
2. 패키지 내용
아래 목록에 있는 모든 품목이 패키지에 포함되어 있는지 확인해 주십시오. 누락되거나 손상된 품목이 있을 경우 즉시 판매처에 연락하십시오.
- VIVOTEK FD9360-HF2 Network Camera
- 장착 템플릿
- 장착 나사 및 벽 앵커
- 방수 커넥터 키트
- 빠른 설치 가이드
- Software CD (or link to download)
3. 설정 및 설치
Proper installation is crucial for optimal performance and longevity of your camera. Ensure you have the necessary tools and safety equipment before beginning.
3.1 사이트 선택
원하는 시야를 확보할 수 있는 설치 위치를 선택하십시오. view, is within range of your network infrastructure, and offers protection from direct impact or vandalism. The camera is rated IP65 for outdoor use.
3.2 카메라 장착
- 표면 준비: Use the provided mounting template to mark drill holes on the ceiling or wall.
- 드릴 구멍: 장착 나사용 드릴로 구멍을 뚫고 필요한 경우 벽 앵커를 삽입하십시오.
- 기지를 확보하세요: Attach the camera's mounting base to the surface using the screws. Ensure it is firmly secured.
- 케이블 관리 : Route the network cable through the designated opening in the mounting base.
3.3 네트워크 및 전원 연결
- 이더넷 연결: Connect an RJ45 Ethernet cable to the camera's network port. For outdoor installations, use the waterproof connector kit to ensure a sealed connection.
- PoE(Power over Ethernet): The FD9360-HF2 supports PoE, simplifying installation by delivering both power and data over a single Ethernet cable. Connect the Ethernet cable to a PoE-enabled switch or injector.
- Alternative Power (if applicable): If PoE is not used, connect a 12V DC power adapter (not included) to the camera's power input.
3.4 초기 구성
After physical installation, connect to the camera via your network. Refer to the Quick Installation Guide or the full user manual (available on the VIVOTEK website) for detailed instructions on IP address discovery and initial setup using VIVOTEK's utility software.
4. 카메라 작동
Once configured, the camera can be accessed and managed through a web browser or compatible VMS (Video Management Software).
4.1 액세스 Web 인터페이스
- 열기 web 브라우저(예: Chrome, Firefox).
- 주소창에 카메라의 IP 주소를 입력하고 Enter 키를 누르세요.
- Log in using the default credentials (refer to your Quick Installation Guide for default username and password, and change them immediately for security).
4.2 주요 기능 및 설정
- 살다 View: 실시간 영상 피드를 모니터링하세요.
- 녹음 설정: Configure continuous, motion-triggered, or scheduled recording to a network video recorder (NVR) or local storage (if supported).
- 이미지 설정: Adjust brightness, contrast, saturation, sharpness, and enable/disable WDR Pro and SNV for optimal image quality in varying light conditions.
- IR 조명기: The built-in IR illuminators automatically activate in low light to provide clear black and white images in complete darkness.
- 동작 감지: Set up motion detection zones and sensitivity for event-triggered recording and alerts.
- 네트워크 설정: Configure IP address, DNS, and other network parameters.
5. 유지관리
Regular maintenance ensures the longevity and optimal performance of your VIVOTEK camera.
- 청소: Periodically clean the camera's dome cover with a soft, damp cloth. Avoid abrasive cleaners that could scratch the surface. Ensure the lens is free of dust and smudges.
- 펌웨어 업데이트: Check the VIVOTEK official website regularly for firmware updates. Updating firmware can improve performance, add new features, and address security vulnerabilities. Follow the instructions provided by VIVOTEK for firmware upgrade procedures.
- 케이블 검사: Periodically inspect all cables for signs of wear, damage, or corrosion, especially for outdoor installations.
- 환경 점검: Ensure the camera's environment remains within its specified operating temperature and humidity ranges.
6. 문제 해결
This section addresses common issues you might encounter with your VIVOTEK FD9360-HF2 camera.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 전원이 안 들어옴/카메라가 켜지지 않음 | No PoE connection; faulty power adapter; damaged cable. | Verify PoE switch/injector is active. Check power adapter and cable connections. Test with a known good power source. |
| 비디오 피드 없음 | 네트워크 연결 문제; 잘못된 IP 주소; 방화벽 차단. | Check network cable. Ping camera's IP address. Ensure camera and viewing device are on the same network segment. Disable temporary firewalls. |
| Poor Image Quality (Blurry/Dark) | Dirty lens/dome; improper focus (if adjustable); insufficient lighting; incorrect image settings. | Clean the dome and lens. Adjust image settings (brightness, contrast, WDR Pro, SNV). Ensure adequate lighting or proper IR operation. |
| 접근할 수 없습니다 Web 인터페이스 | Incorrect IP address; network conflict; browser compatibility. | Confirm camera's IP address. Check for IP conflicts on your network. Try a different web 브라우저. 브라우저 캐시를 지우세요. |
For more complex issues, refer to the full user manual or contact VIVOTEK technical support.
7. 사양
Key technical specifications for the VIVOTEK FD9360-HF2 camera:
- 모델: FD9360-HF2
- 효과적인 비디오 해상도: 2MP(1920x1080)
- 프레임 속도: 30fps
- 렌즈: 2.8mm (고정)
- 연결 기술 : 무선(Wi-Fi) 및 유선(RJ45)
- 전원: AC/DC, supports Power over Ethernet (PoE)
- 실내/실외 사용: 집 밖의
- 국제 보호 등급: IP65
- 저조도 기술: Day/Night with IR Illuminators, SNV, WDR Pro
- 치수(길이 x 너비 x 높이): 4.61 x 4.61 x 3.53 인치
- 품목 무게: 0.01 온스
- 왓tage: 9.5 와트
- 한국어: 745560774694
8. 보증 및 지원
VIVOTEK products are backed by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official VIVOTEK web대지.
For technical assistance, product inquiries, or support, please contact VIVOTEK customer service or visit their support portal:
- VIVOTEK 공식 Web대지: www.vivotek.com
- 지원 포털: 참조 web지역별 지원 연락처 및 자료를 제공하는 사이트입니다.
