Fanvil WB101 Wallmount Bracket Instruction Manual

1. 서론

This manual provides comprehensive instructions for the installation and use of the Fanvil WB101 Wallmount Bracket. This bracket is designed to securely mount compatible Fanvil X-series IP phones to a wall, optimizing desk space and improving accessibility. Please read this manual thoroughly before installation to ensure proper setup and safe operation.

2. 안전 정보

• Ensure the mounting surface is strong enough to support the weight of the bracket and the phone.
• 설치 시에는 적절한 도구와 하드웨어를 사용하십시오. 확실하지 않은 경우 자격을 갖춘 전문가에게 문의하십시오.
• 질식 위험을 방지하려면 작은 부품을 어린이의 손이 닿지 않는 곳에 보관하십시오.
• Do not overtighten screws, as this may damage the bracket or the wall.
• Verify the phone is securely attached to the bracket after installation.

3. 패키지 내용

Please check the package contents upon opening. If any items are missing or damaged, contact your vendor.

• Fanvil WB101 Wallmount Bracket
• 장착 나사(일반적으로 포함됨)
• Wall Anchors (typically included)

4. 설정 및 설치

Follow these steps to install the Fanvil WB101 Wallmount Bracket and attach your Fanvil X-series phone.

4.1. Mounting the Bracket to the Wall

1. 위치 선택: Choose a suitable wall location that is structurally sound and allows for easy access to the phone.
2. 드릴링 지점 표시: Hold the WB101 bracket against the wall at the desired height. Use a pencil to mark the positions for the mounting screws through the designated holes on the bracket.
3. 드릴 구멍: Using an appropriate drill bit for your wall type (e.g., masonry for concrete, wood bit for studs), drill pilot holes at the marked locations. If drilling into drywall without a stud, insert wall anchors into the drilled holes.
4. 브래킷을 고정합니다: Align the bracket with the drilled holes and secure it to the wall using the provided mounting screws. Ensure the bracket is level and firmly attached.

4.2. Attaching the Phone to the Bracket

The Fanvil WB101 bracket is compatible with Fanvil X1S, X1SP, X3S, X3SP, X3SG, and X3U phones.

1. Remove Phone Stand: If your Fanvil phone has a desktop stand attached, remove it according to your phone's instructions.
2. Align Phone: Carefully align the mounting points on the back of your Fanvil phone with the corresponding clips and slots on the WB101 wallmount bracket.
3. 보안 전화: Gently slide the phone onto the bracket until it clicks into place or is firmly seated. Ensure all clips engage properly. Some phone models may require a screw to further secure the phone to the bracket (refer to your phone's manual for specific details).
4. 케이블 관리 : Route any necessary cables (e.g., Ethernet, power) through the designated openings on the bracket or phone to maintain a tidy appearance.

5. 사용

Once installed, the Fanvil WB101 bracket securely holds your compatible Fanvil IP phone on the wall. This frees up desk space and positions the phone for convenient use in various environments such as offices, reception areas, or common spaces. Ensure all cables are properly connected to the phone for full functionality.

6. 유지관리

• 청소: To clean the bracket, gently wipe it with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these may damage the finish.
• 점검: Periodically check the mounting screws and the phone's attachment to the bracket to ensure they remain secure.

7. 문제 해결

• Bracket feels loose on the wall: Ensure mounting screws are tightened sufficiently and wall anchors (if used) are properly installed. The wall surface must be capable of supporting the weight.
• Phone does not fit the bracket: Verify that your phone model is listed as compatible (Fanvil X1S, X1SP, X3S, X3SP, X3SG, X3U). Ensure the phone's desktop stand has been removed.
• Phone is not secure on the bracket: Make sure the phone is correctly aligned with the bracket's clips and slots and fully engaged. Apply gentle pressure until it locks into place.

8. 사양

9. 보증 및 지원

For warranty information and technical support, please refer to the documentation provided with your Fanvil phone or visit the official Fanvil website. Contact your vendor or Fanvil customer service for assistance with product-related inquiries or issues.