매뉴얼+

STEELMATE STEELMATE 1 Bucket of 40 Pcs.

스틸메이트 1 수직 철근 안정기 사용 설명서

Model: STEELMATE 1 Bucket of 40 Pcs. | Brand: STEELMATE

소개

The STEELMATE 1 Vertical Rebar Stabilizer is designed to ensure accurate and stabilized placement of vertical rebar, particularly when transitioning from a concrete foundation to a vertical wall. This product is engineered for durability and reusability, offering a time and cost-effective solution for construction projects.

주요 특징은 다음과 같습니다.

  • Ideal for accurate placement of vertical rebar for foundation to wall construction.
  • Durable and reusable design.
  • Contributes to significant time and money savings.
  • Provides the fastest method for accurately tying vertical rebar.
앞쪽 view of the STEELMATE 1 bucket containing 40 pieces of rebar stabilizers.
Figure 1: The STEELMATE 1 Bucket of 40 Pcs. This bucket contains 40 individual STEELMATE units, designed for easy storage and transport.

제품 끝view

Each STEELMATE unit is a robust, safety orange-colored component made of steel, designed to securely hold rebar in place. The unique design allows for use with various rebar sizes and is suitable for different construction methods.

클로즈업 view of a single STEELMATE rebar stabilizer unit, showing its rectangular shape and rebar-holding hooks.
Figure 2: A single STEELMATE unit. These units are rectangular in shape and feature multiple hooks to accommodate different rebar sizes.
View inside the STEELMATE bucket, showing multiple orange STEELMATE units stacked together.
Figure 3: Multiple STEELMATE units within the storage bucket. The bucket provides convenient storage and easy access to the 40 pieces.

설정 및 설치

The STEELMATE system is designed for quick and accurate installation of vertical rebar. Follow these steps for optimal results:

Back of the STEELMATE bucket showing a diagram of the measure and install steps, along with removal instructions.
Figure 4: Installation and Removal Guide. This diagram illustrates the process for setting up and removing STEELMATE units.

Measure and Install:

  1. Measure for Rebar Layout: Use a 2x4 template to accurately measure and mark the rebar layout on your foundation. This ensures precise spacing for the vertical rebar.
  2. Attach STEELMATE: Place the STEELMATE units onto the 2x4 template. The units are designed to fit securely.
  3. Fasten All Tools: Securely fasten all STEELMATE units to the 2x4 template using 6D Duplex nails. This creates a stable and unified assembly.
  4. Clamp Rebar in Place: Position the vertical rebar into the STEELMATE units and clamp them securely. Repeat this process for all necessary rebar placements.

STEELMATE is compatible with rebar sizes 3, 4, 5, 6, 7, and 8, providing versatility for various project requirements.

작동 지침

Once installed, STEELMATE units provide a stable framework for pouring concrete, ensuring that vertical rebar remains straight and correctly positioned. This system is ideal for:

  • Form & Pour construction.
  • CMU (Concrete Masonry Unit) Block construction.
  • ICF (Insulated Concrete Form) construction.
건설 현장 view with a worker pouring concrete, showing STEELMATE units in use stabilizing vertical rebar before concrete pour.
Figure 5: STEELMATE in use on a construction site. The units are visible at the base of the vertical rebar, ensuring proper alignment during concrete pouring.

The system significantly reduces the time required for rebar setup, allowing for faster project completion and improved accuracy.

유지보수 및 재사용성

STEELMATE units are designed for multiple uses, contributing to their cost-effectiveness. Proper removal ensures their longevity.

Removal and Reuse:

Individual Removal:

  1. Remove 6D Duplex Nail: Carefully remove the 6D Duplex nail from the 2x4 template.
  2. Use Hammer Claw: Use a hammer claw to lift off the STEELMATE tool from the rebar.

Template Removal:

  1. Leave All Tools Fastened: Keep all STEELMATE units fastened to the 2x4 template.
  2. Firmly Knock Off: Firmly knock off the entire 2x4 template with a hammer, ensuring all units detach cleanly.

After removal, clean any concrete residue from the STEELMATE units and store them in the provided bucket for future use. This practice ensures the tools remain in good condition for repeated applications.

문제 해결

While STEELMATE is designed for straightforward use, here are some common considerations:

  • Rebar Not Fitting Securely: Ensure you are using rebar sizes 3, 4, 5, 6, 7, or 8. Verify that the rebar is properly seated within the STEELMATE's hooks.
  • Template Instability: Make sure the 6D Duplex nails are fully driven and the 2x4 template is stable on the foundation. Uneven surfaces can affect stability.
  • Difficulty Removing Units: If units are difficult to remove, ensure all nails are extracted first. For template removal, a firm, even strike with a hammer should dislodge the assembly.
  • Damage to Units: Inspect units for any damage before reuse. While durable, extreme force or improper handling can cause wear. Discard any visibly damaged units to maintain structural integrity.

명세서

기인하다세부 사항
상표스틸메이트
모델STEELMATE 1 Bucket of 40 Pcs.
재료강철
색상안전 오렌지
모양직사각형
품목 형태술집
Compatible Rebar Sizes3, 4, 5, 6, 7, 8
제조업체스틸메이트
ASINB08467KHPV
첫 번째 이용 가능 날짜24년 2020월 XNUMX일

보증 정보

Specific warranty details for the STEELMATE 1 Bucket of 40 Pcs. are not provided in the product information. For any warranty-related inquiries, please contact the manufacturer directly using the support information below.

지원 및 연락처

For further assistance, technical support, or product inquiries, please contact STEELMATE:

  • 제조업체: 스틸메이트
  • Web대지: www.steelmate.com
  • 주소: 4020 Palos Verdes Dr. North, Ste. 205, Rolling Hills Estates, CA 90274, USA
  • 제품 UPC: 0860002591605

Please refer to the product's packaging or the official STEELMATE web최신 연락처 정보와 지원 리소스를 제공하는 사이트입니다.