1. 서론
This manual provides essential instructions for the safe operation, setup, maintenance, and troubleshooting of your Hart HPID01B 20-Volt Cordless Impact Driver Kit. Please read this manual thoroughly before using the tool to ensure proper function and to prevent injury.
The Hart 20V Impact Driver is designed for various fastening applications, offering up to 1700 inch-pounds of torque. It features an integrated work light for improved visibility and a variable speed trigger for precise control. The 1/4-inch collet allows for quick bit changes.
Figure 1: Hart HPID01B 20-Volt Cordless Impact Driver. This image displays the impact driver in its assembled state with the 20V 1.5Ah Lithium-Ion battery attached. The tool is predominantly black and white with blue accents, featuring the 'HART' logo prominently on the side and battery.
2. 일반 안전 정보
Always wear appropriate personal protective equipment, such as safety glasses, hearing protection, and gloves, when operating power tools. Ensure your work area is well-lit and clear of obstructions. Keep children and bystanders away while operating the tool. Disconnect the battery pack before making any adjustments, changing accessories, or storing the tool.
Refer to the separate safety manual (if provided) for comprehensive safety guidelines specific to power tools.
3. 패키지 내용
Your Hart HPID01B 20-Volt Cordless Impact Driver Kit typically includes the following items:
- Hart HPID01B 20-Volt Cordless Impact Driver
- 20-Volt 1.5Ah Lithium-Ion Battery
- Battery Charger (Note: Charger type may vary. Refer to charger manual for specific instructions.)
- 사용 설명서
Inspect all components for damage upon receipt. If any parts are missing or damaged, contact customer service.
4. 설정
4.1. 배터리 충전
- 배터리 충전기가 표준 전원 콘센트에 연결되어 있는지 확인하세요.
- Slide the 20-Volt 1.5Ah Lithium-Ion battery into the charger until it clicks into place.
- Observe the charger's indicator lights. A solid green light typically indicates a fully charged battery. Refer to your specific charger's manual for detailed light indications.
- 완전히 충전되면 배터리를 충전기에서 분리하세요. 배터리를 과충전하지 마세요.
중요한: Only use Hart 20V Lithium-Ion batteries and chargers with this tool. Using incompatible batteries or chargers may result in damage or injury.
4.2. Attaching and Removing Bits
- Ensure the battery pack is removed from the impact driver before attaching or removing bits.
- Pull the 1/4-inch hex collet sleeve forward.
- Insert the hex shank bit fully into the collet.
- Release the collet sleeve. The bit should be securely locked in place. Pull on the bit to confirm it is seated properly.
- To remove a bit, pull the collet sleeve forward and pull the bit out.
5. 사용 설명서
5.1. 배터리 팩 설치
- 배터리 팩을 도구 바닥의 배터리 포트에 맞춥니다.
- 배터리 팩을 도구에 밀어 넣어 딸깍 소리가 나면서 단단히 고정되도록 합니다.
- To remove, press the battery release button (usually located on the battery pack) and slide the battery out.
5.2. 전원 켜기/끄기 및 가변 속도 제어
- To turn the tool on, depress the variable speed trigger. The tool speed increases as the trigger is pressed further.
- 공구를 끄려면 방아쇠를 놓으십시오.
- The tool features a maximum rotational speed of 2500 RPM.
5.3. 정방향/역방향 회전
A forward/reverse selector switch is located above the trigger. Push the switch to the left for forward rotation (tightening fasteners) and to the right for reverse rotation (loosening fasteners). Ensure the switch is in the center position to lock the trigger and prevent accidental startup.
5.4. Integrated Work Light
The impact driver is equipped with an integrated LED work light that illuminates the work area when the trigger is depressed. This light improves visibility in dimly lit conditions.
5.5. Fastening Applications
The impact driver delivers up to 1700 inch-pounds of torque, making it suitable for driving various fasteners into wood, metal, and other materials. Apply steady pressure to the tool and allow the impact mechanism to do the work. Avoid excessive force, which can strip fasteners or damage the workpiece.
6. 유지관리
6.1. 청소
- 청소하기 전에 항상 배터리 팩을 제거하십시오.
- 깨끗한 d를 사용하세요amp 천을 사용하여 도구 외부를 닦으세요. 강한 화학 물질이나 연마성 세척제는 사용하지 마세요.
- 과열을 방지하려면 환기구에 먼지나 이물질이 없도록 깨끗하게 유지하세요. 필요한 경우 압축 공기를 사용하세요.
6.2. 보관
- Store the tool and battery in a cool, dry place, away from direct sunlight and extreme temperatures.
- For long-term storage, it is recommended to store Lithium-Ion batteries with a partial charge (around 50%).
- 어린이의 손이 닿지 않는 곳에 보관하세요.
7. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 도구가 시작되지 않습니다. |
|
|
| 배터리가 충전되지 않습니다. |
|
|
| 전력이나 성능이 저하됨. |
|
|
8. 사양
| 특징 | 사양 |
|---|---|
| 모델 번호 | HPID01B |
| 상표 | 수사슴 |
| 전원 | 배터리 구동 |
| 권tage | 20 볼트 |
| 배터리 유형 | 리튬이온 |
| 배터리 용량 | 1.5 Amp 시간 |
| 최대 회전 속도 | 2500 RPM |
| 최대 토크 | 1700인치 파운드 |
| 척 사이즈 | 0.25 Inches (Hex Collet) |
| 특징 | Variable Speed, Integrated Work Light |
| 품목 무게 | 2.6파운드 (배터리 제외, 공구 본체만 해당) |
| 제품 치수 | 9.84인치 길이 x 7.67인치 너비 x 3.22인치 높이 |
9. 보증 및 지원
For warranty information, technical support, or to order replacement parts, please refer to the warranty card included with your product or visit the official Hart Tools web사이트. 보증 청구를 위해 구매 증빙 자료로 구매 영수증을 보관하세요.
연락처 정보: 제품 포장 또는 제조업체 공식 웹사이트에 제공된 연락처 정보를 참조하십시오. web최신 지원 정보는 사이트에서 확인하세요.
