1. 서론
The Solid State Logic SSL2 is a high-performance 2-in/2-out USB-C audio interface designed for musicians, producers, and content creators. It features class-leading microphone preamps, 24-bit/192 kHz AKM converters, and a unique Legacy 4K analog enhancement mode inspired by classic SSL 4000 series consoles. This manual provides essential information for setting up, operating, and maintaining your SSL2 interface.
그림 1: 전면 view of the Solid State Logic SSL2 Audio Interface.
2. 설정
2.1 시스템 요구 사항
- Operating System: Windows 10 or higher (64-bit), macOS 10.15 (Catalina) or higher.
- USB 2.0 compatible port (USB-C for direct connection, USB-A with adapter).
- Internet connection for driver and software bundle download.
2.2 드라이버 및 소프트웨어 설치
- Visit the Solid State Logic website (solidstatelogic.com/support) to download the latest drivers for your operating system.
- Install the drivers by following the on-screen instructions.
- Register your SSL2 to access the included SSL Production Pack software bundle, which typically includes DAWs, plugins, 및 samp레.
2.3 하드웨어 연결
Connect the SSL2 to your computer using the supplied USB-C cable. The interface is bus-powered, meaning it draws power directly from your computer via the USB connection. Connect your microphones, instruments, and monitors as described below.
Figure 2: Rear panel connections of the Solid State Logic SSL2 Audio Interface.
3. Operating the SSL2
3.1 전면 패널 컨트롤
Figure 3: Close-up of SSL2 front panel controls.
- Input Channels 1 & 2: Each channel features an XLR/TRS combo jack for microphones or line-level instruments.
- +48V 팬텀 전원: 콘덴서 마이크의 팬텀 전원을 활성화합니다.
- Line/Inst Switch: Toggles between line-level and instrument-level input impedance.
- 게인 노브: Adjust the input gain for each channel. Monitor the input level using the LED meters.
- Legacy 4K Button: Engages the 4K analog enhancement, adding a subtle high-frequency boost and harmonic distortion inspired by classic SSL consoles.
- 모니터 수준 : Large central knob controls the overall output level to your studio monitors.
- 모니터 믹스: Blends the input signal with the USB playback from your computer for zero-latency monitoring.
- 헤드폰 레벨 : Dedicated knob for adjusting the headphone output volume.
3.2 후면 패널 연결
- USB-C 포트: Connects to your computer for data and power.
- 켄싱턴 잠금 장치: 기기 보안을 위해.
- Monitor Outputs (L/R): Balanced TRS outputs for connecting to studio monitors.
- 입력 1 및 2: 마이크 또는 라인 레벨 악기를 연결하기 위한 XLR/TRS 콤보 잭.
4. 특징
- Class-Leading Mic Preamps: Two high-quality microphone preamps offering 130.5dB EIN and 62dB of gain for pristine audio capture.
- Pro-Studio Quality Components: Equipped with Neutrik connectors and Alps pots for durability and reliable performance.
- High Current Headphone Amp: Provides clear and powerful headphone monitoring.
- 24-bit / 192 kHz AKM Converters: Ensures high-fidelity audio conversion for recording and playback.
- Legacy 4K Analog Enhancement: Instantly adds a touch of classic SSL 4000 series console character to your recordings.
- SSL Production Pack: An exclusive software bundle included with your purchase, featuring various DAWs, plugins, 및 samples to kickstart your production.
Figure 4: The SSL Production Pack software bundle.
5. 사양
| 특징 | 세부 사항 |
|---|---|
| 품목 무게 | 2.53파운드 |
| 제품 치수 | 11 x 8 x 4 인치 |
| 품목 모델 번호 | SSL2 |
| 호환 장치 | 개인용 컴퓨터 |
| 하드웨어 인터페이스 | USB |
| 지원 소프트웨어 | SSL 프로덕션 팩 |
| 운영 체제 | 윈도우, 맥OS |
| 연결 기술 | USB |
| 채널 수 | 4개 (입력 2개, 출력 2개) |
6. 유지관리
- 청소: Use a soft, dry cloth to clean the exterior of the interface. Avoid liquid cleaners or abrasive materials.
- 저장: 본 기기는 직사광선과 극한의 온도를 피해 시원하고 건조한 곳에 보관하세요.
- 케이블 관리 : 포트나 케이블이 손상되지 않도록 모든 케이블이 단단히 연결되어 있고 과도한 장력이 가해지지 않았는지 확인하십시오.
- 소프트웨어 업데이트: Regularly check the Solid State Logic website for firmware and driver updates to ensure optimal performance and compatibility.
7. 문제 해결
- 전원/연결 없음: Ensure the USB-C cable is securely connected to both the SSL2 and your computer. Try a different USB-C port or cable.
- 소리 없음:
- Check monitor and headphone levels.
- Verify the Monitor Mix knob is set correctly (between Input and USB).
- Ensure the SSL2 is selected as the audio input/output device in your computer's sound settings and your DAW.
- Confirm drivers are installed correctly.
- 왜곡된 소리:
- Reduce input gain to prevent clipping (red LEDs on the meter).
- 케이블이나 연결 부분에 결함이 있는지 확인하십시오.
- 확인ample rates match between your DAW and the SSL2 settings.
- 팬텀 전원이 작동하지 않음: Ensure the +48V button is engaged for the correct channel.
8. 보증 및 지원
The Solid State Logic SSL2 is covered by a manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please visit the official Solid State Logic web사이트를 방문하거나 고객 지원팀에 직접 문의하세요. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
