1. 제품 오버view
The microSHIFT ADVENT Rear Derailleur is engineered for reliable and precise shifting across a wide range of gears. It features a robust design with a built-in clutch mechanism to enhance chain management, particularly over challenging terrain. This derailleur is specifically designed for 9-speed drivetrains and is compatible with microSHIFT ADVENT shifters and 11-46T 9-speed cassettes.
Figure 1: The microSHIFT ADVENT Rear Derailleur, showcasing its black finish, long cage, and the integrated clutch mechanism on the upper body.
주요 특징:
- Ratchet-and-Pawl Clutch: Provides superior chain retention and is easily adjustable and repairable.
- Direct Path Cable Routing: Ensures smooth and responsive shifting performance.
- 폭넓은 호환성: Designed for use with 11-46T 9-speed cassettes.
- ADVENT System Integration: Exclusively compatible with microSHIFT ADVENT shifters for optimal performance.
2. 설정 및 설치
Proper installation is crucial for the optimal performance of your microSHIFT ADVENT Rear Derailleur. It is recommended that installation be performed by a qualified bicycle mechanic if you are unfamiliar with the process.
2.1 필요한 도구:
- 육각 렌치 (다양한 크기, 일반적으로 4mm, 5mm)
- 케이블 절단기
- 토크 렌치 (정밀한 조임 작업에 권장)
- Chain whip and cassette tool (if replacing cassette)
- Chain breaker (if replacing chain)
2.2 설치 단계:
- 변속기 장착: Attach the derailleur to the bicycle's derailleur hanger. Ensure it is securely fastened with the appropriate torque.
- 케이블 라우팅: Route the shift cable through the frame and connect it to the derailleur's cable anchor bolt. The direct path cable routing design simplifies this step.
- 체인 설치: Install a new 9-speed chain, ensuring it is sized correctly for your drivetrain and 11-46T cassette.
- 제한 나사 조정: Adjust the high (H) and low (L) limit screws to prevent the chain from shifting beyond the smallest and largest cogs of the cassette.
- B-장력 조정: Adjust the B-tension screw to set the proper gap between the upper guide pulley and the largest cog. This is critical for smooth shifting across the cassette.
- 인덱싱 조정: Fine-tune the shifting by adjusting the barrel adjuster on the shifter or derailleur until shifts are crisp and precise across all 9 gears.
Important: This derailleur is only compatible with microSHIFT ADVENT shifters. Using other shifters may result in poor performance or damage.
3. 사용 설명서
The microSHIFT ADVENT Rear Derailleur operates in conjunction with your microSHIFT ADVENT shifter to provide smooth gear changes.
3.1 기어 변속:
- Use your microSHIFT ADVENT shifter to move the chain between the cogs on your 9-speed cassette.
- To shift to a larger cog (easier gear), push the appropriate lever on your shifter.
- To shift to a smaller cog (harder gear), push the other lever on your shifter.
- Always pedal forward while shifting to ensure smooth and efficient gear changes. Avoid shifting under heavy load.
3.2 Clutch Mechanism:
The integrated ratchet-and-pawl clutch helps to keep the chain taut, reducing chain slap and preventing the chain from dropping, especially on rough terrain.
- The clutch is typically engaged by default.
- Some models may feature an on/off switch for the clutch. Refer to your specific derailleur model for details. When the clutch is engaged, you will feel increased resistance when moving the derailleur cage by hand.
- For wheel removal or maintenance, disengaging the clutch (if applicable) can make the process easier by reducing spring tension.
4. 유지관리
Regular maintenance will extend the life and ensure the optimal performance of your microSHIFT ADVENT Rear Derailleur.
4.1 청소:
- After each ride, especially in wet or dirty conditions, clean the derailleur body, pulleys, and cage.
- Use a degreaser to remove grime from the pulleys and chain. Rinse thoroughly with water.
- Dry the derailleur completely to prevent rust.
4.2 윤활:
- Apply a small amount of bicycle-specific lubricant to the pivot points of the derailleur and the pulley bearings periodically.
- Lubricate your chain regularly according to riding conditions.
4.3 Clutch Adjustment:
The ratchet-and-pawl clutch is adjustable. If you notice excessive chain slack or the clutch feels too stiff, it can be adjusted. Consult a qualified mechanic or microSHIFT's official resources for detailed clutch adjustment procedures.
4.4 검사:
- Regularly inspect the derailleur for any signs of damage, bending, or loose bolts.
- Check the derailleur hanger for alignment. A bent hanger is a common cause of poor shifting.
- Ensure the pulley wheels spin freely and are not worn out. Replace if necessary.
5. 문제 해결
이 섹션에서는 뒷변속기에서 발생할 수 있는 일반적인 문제에 대해 설명합니다.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 변속이 부실하거나 일관성이 없음 | Incorrect cable tension, bent derailleur hanger, worn cable/housing, dirty derailleur, incorrect limit screw adjustment. | Adjust barrel adjuster, check/straighten hanger, replace cable/housing, clean and lubricate derailleur, re-adjust limit screws. |
| Chain drops off cassette | Incorrect limit screw adjustment, bent derailleur hanger, insufficient clutch tension. | Re-adjust limit screws, check/straighten hanger, adjust clutch tension (if applicable). |
| Chain slap or excessive noise | Clutch disengaged or too loose, chain too long, worn chain/cassette. | Engage/adjust clutch, shorten chain, replace worn drivetrain components. |
| Derailleur cage rubs chain | B-장력 조정 오류, 변속기 케이지 휨. | Adjust B-tension screw, inspect and replace bent cage if necessary. |
If you are unable to resolve an issue, please consult a professional bicycle mechanic or contact microSHIFT customer support.
6. 사양
| 기인하다 | 값 |
|---|---|
| 상표 | 마이크로시프트 |
| 모델 번호 | MSH-RD-M6195L |
| 구동계 속도 | 9단 |
| 케이지 길이 | 롱 케이지 |
| 최대 톱니바퀴 호환성 | Up to 46T (teeth) |
| 클러치 유형 | Ratchet-and-Pawl |
| Rear Derailleur Mount Type | Rear Direct Mount (Braze-On Mount) |
| 색상 | 검은색 |
| 재료 | 알류미늄 |
| 품목 무게 | 0.35 킬로그램 |
| 한국어: | 657993205259 |
7. 보증 및 지원
For warranty information, technical support, or service inquiries regarding your microSHIFT ADVENT Rear Derailleur, please refer to the official microSHIFT web해당 웹사이트를 방문하거나 공인 대리점에 문의하십시오.
보증 청구를 위해 구매 증빙서류를 보관하는 것이 좋습니다.
microSHIFT 공식 계정 Web대지: www.마이크로시프트.com
