1. 서론
This manual provides essential information for the proper use, maintenance, and storage of the 3M Mercury Vapor/Organic Vapor/Acid Gas Cartridge/Filter P100, model 60927. This product is designed to be used with compatible 3M half and full facepiece respirators featuring a bayonet-style connection.
The 3M 60927 cartridge/filter is NIOSH-approved for protection against mercury vapor, chlorine, sulfur dioxide, organic vapor, and hydrogen sulfide. It also includes a P100 particulate filter for protection against certain oil and non-oil based particulates.
그림 1: 전면 view of the 3M Mercury Vapor/Organic Vapor/Acid Gas Cartridge/Filter P100 60927. The magenta color indicates its specific protection capabilities.
2. 안전 정보
경고: Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. These products are intended for workplace use by trained industrial and occupational customers. They are not intended for consumer use.
- Always refer to NIOSH guidelines for proper use of respiratory protection equipment.
- Consult the respirator manufacturer's instructions for specific attachment procedures and compatibility.
- Ensure the cartridge is appropriate for the specific contaminants and concentrations present in your work environment.
- 생명이나 건강에 즉각적인 위험이 있는 환경(IDLH)에서는 사용하지 마십시오.
- 샌드블라스팅 용도로 사용하지 마십시오.
- 호흡 곤란, 현기증 또는 기타 불편함이 발생하거나 오염 물질의 냄새나 맛을 느끼는 경우 오염 지역에서 즉시 벗어나십시오.
- Replace cartridges according to a change-out schedule or sooner if breakthrough occurs.
- Store unused cartridges in their original packaging in a clean, dry area away from contaminants.
제품 선택 및 사용에 대한 도움이 필요하시면 현장 안전 전문가, 산업 위생 전문가 또는 기타 관련 분야 전문가에게 문의하십시오.
3. 설정 및 설치
The 3M 60927 Cartridge/Filter is designed for easy attachment to compatible 3M half and full facepiece respirators using a bayonet connection system.
3.1 필수 장비
- 3M Mercury Vapor/Organic Vapor/Acid Gas Cartridge/Filter P100 (Model 60927)
- Compatible 3M Half or Full Facepiece Respirator (sold separately)
3.2 설치 단계
- 구성 요소 검사: Before each use, inspect the cartridge/filter and the respirator facepiece for any signs of damage, cracks, or wear. Do not use damaged equipment.
- 카트리지 정렬: Align the bayonet connection on the cartridge with the corresponding receptacle on the respirator facepiece. The cartridge should be oriented so the 3M logo and model number are visible and facing outwards.
- Attach Cartridge: Push the cartridge onto the receptacle and twist clockwise approximately a quarter turn until it clicks into place. Ensure both cartridges (if using a dual-cartridge respirator) are securely attached.
- 봉인 점검을 수행하십시오: Conduct a positive and/or negative pressure user seal check as described in your respirator's instruction manual to ensure a proper fit and seal.
그림 2: 하단 view of the 3M 60927 cartridge, highlighting the bayonet connection point for attachment to a respirator.
4. 사용 설명서
Once properly installed on a compatible 3M respirator and a successful user seal check has been performed, the 3M 60927 cartridge/filter provides respiratory protection.
- 착용 시간: The service life of the cartridge depends on various factors including contaminant concentration, breathing rate, humidity, and temperature. Follow your employer's change-out schedule or local regulations.
- Contaminant Detection: The cartridge is designed to filter specific gases, vapors, and particulates. If you detect the smell or taste of contaminants, or experience irritation, immediately leave the contaminated area and replace the cartridges.
- P100 Particulate Filter: The integrated P100 filter provides high-efficiency particulate filtration against both oil and non-oil based aerosols.
Figure 3: An industrial worker utilizing respiratory protection, demonstrating a typical application environment for the 3M 60927 cartridge.
5. 유지 관리 및 보관
5.1 카트리지 교체
Cartridges must be replaced when:
- Contaminants are detected by smell, taste, or irritation.
- Breathing resistance significantly increases.
- The established change-out schedule is reached.
- 카트리지가 손상되었습니다.
To replace, twist the used cartridge counter-clockwise to detach it from the respirator. Dispose of used cartridges according to local regulations. Install new cartridges following the "Setup and Installation" steps.
5.2 보관
Store unused cartridges in their original, sealed packaging in a clean, dry, and cool environment, away from direct sunlight and contaminants. Do not store near chemicals or in areas with high humidity.
6. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Smell/Taste of Contaminants | Cartridge breakthrough, improper seal, cartridge expired, wrong cartridge type. | Immediately leave contaminated area. Replace cartridges. Re-check seal. Ensure correct cartridge for hazard. |
| Difficulty Breathing | Cartridges clogged with particulates, high breathing rate, physical exertion. | Immediately leave contaminated area. Replace cartridges. Reduce exertion. |
| Cartridge not attaching securely | Improper alignment, damaged bayonet connection on cartridge or respirator. | Ensure correct alignment and twist until click. Inspect for damage; replace if necessary. |
| 불편함 또는 자극 | Improper fit, allergic reaction to materials, contaminants bypassing seal. | Re-adjust respirator fit. Perform seal check. Consult safety professional. |
7. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | 60927 |
| 상표 | 3M |
| 보호 유형 | Mercury Vapor, Organic Vapor, Acid Gas, P100 Particulate |
| NIOSH 승인 | 예 |
| 연결 유형 | 총검 |
| 색상 | 마젠타 |
| 제품 크기(L x W x H) | 17.3 x 15.1 x 11.1 inches (packaging dimensions, individual cartridge smaller) |
| 첫 번째 이용 가능 날짜 | 14년 2020월 XNUMX일 |
| 제조업체 | 3M |
8. 보증 및 지원
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers.
For additional product information, technical support, or warranty details, please visit the official 3M website or contact your local 3M representative. It is crucial to select and use products in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations.
온라인 리소스: www.3M.com