소개
This manual provides essential information for the proper setup, operation, and maintenance of your replacement treadmill belt, including the use of the accompanying silicone oil. Adhering to these guidelines will help ensure optimal performance and longevity of your treadmill belt.
제품 끝view
Image: A new black treadmill belt, rolled for packaging, is shown alongside a bottle of treadmill lubricant and an applicator tube. The lubricant is essential for maintaining the belt's performance.
The product includes a premium replacement treadmill belt and a bottle of silicone oil. This belt is designed for compatibility with various treadmill models, including Horizon Fitness 30410, Free Spirit Sears CA, T51, and TM123. The silicone oil is provided to ensure proper lubrication of the treadmill deck, which is crucial for smooth operation and to prevent premature wear of the belt and motor.
설정 및 설치
- 안전이 최우선입니다. Before beginning installation, ensure your treadmill is unplugged from the power source.
- 오래된 벨트 제거: Carefully remove the old treadmill belt. This may involve loosening tension bolts and removing side rails or motor covers, depending on your treadmill model. Refer to your treadmill's original user manual for specific removal instructions.
- 갑판 청소: Thoroughly clean the treadmill deck surface. Remove any dust, debris, or old lubricant residue. A clean, dry cloth is recommended.
- 새 벨트 설치: Slide the new belt onto the treadmill deck, ensuring it is centered and aligned with the rollers.
- 윤활제를 바르세요: Before tensioning, lift the belt and apply a thin, even layer of the provided silicone oil to the center of the treadmill deck, underneath the belt. Use the applicator tube for precise application. Typically, 5-10 ml (approximately 1-2 lines across the deck) is sufficient.
- Tension Belt: Re-tension the belt according to your treadmill manufacturer's specifications. The belt should be snug but not overly tight. Over-tightening can cause excessive wear on the belt and motor.
- Align Belt: Plug in the treadmill and run it at a slow speed (e.g., 2-3 km/h). Adjust the rear roller bolts as needed to ensure the belt tracks centrally. Turn the treadmill off and unplug it before making any adjustments to the bolts.
운영 지침
- 초기 실행: After installation, run the treadmill for 5-10 minutes at a moderate speed without a user to allow the lubricant to spread evenly and the belt to settle.
- 정기적인 윤활: Consistent lubrication is vital. Refer to the Maintenance section for recommended lubrication frequency.
- 적절한 신발 착용: Always use appropriate athletic footwear when operating the treadmill to ensure good grip and prevent excessive wear on the belt surface.
- Even Foot Placement: Try to distribute your weight evenly across the belt during use to minimize uneven wear.
유지
Regular maintenance extends the life of your treadmill belt and ensures safe operation.
- 윤활 일정: Lubricate the treadmill deck every 3-6 months, or after every 100-150 hours of use, whichever comes first. Use only the provided silicone oil or a 100% silicone treadmill lubricant. Never use petroleum-based lubricants.
- 청소:
- Wipe down the belt surface with a damp 매번 사용 후 천으로 땀과 잔해물을 제거하십시오.
- Periodically vacuum underneath the treadmill and around the motor area to prevent dust buildup.
- 벨트 장력 점검: Periodically check the belt tension. The belt should not slip when you walk or run on it, but it should also not be so tight that it strains the motor. A good test is to lift the belt in the center; it should lift approximately 2-3 inches from the deck.
- 벨트 정렬 점검: Regularly observe the belt's tracking. If it drifts to one side, adjust the rear roller bolts to re-center it. Make small adjustments (quarter turns) and re-check.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Belt slips during use | Insufficient belt tension or lack of lubrication. | Increase belt tension slightly. Apply silicone lubricant to the deck. |
| Belt drifts to one side | Belt is misaligned. | Adjust the rear roller bolts to re-center the belt. |
| Excessive noise from belt | Lack of lubrication, belt too tight, or debris under belt. | Apply lubricant. Loosen belt tension slightly. Clean under the belt. |
| Treadmill motor strains or overheats | Belt too tight or insufficient lubrication. | Loosen belt tension. Apply silicone lubricant. |
명세서
- 재료: 프리미엄
- 색상: 검은색
- 벨트 스타일: 평 벨트
- 호환 장치: 밟아 돌리는 바퀴
- 항목 수: 1 (belt) + 1 (silicone oil)
- 제조업체: Worldwide Treadmill Belts
보증 및 지원
Specific warranty information for this product is not provided in the available data. For any questions regarding product defects, installation assistance, or general support, please contact the seller, Treadmill Belts Worldwide, directly through your purchase platform.
지원 문의사항이 있을 경우 구매 증빙 자료를 보관해 주세요.
