1. 서론
Welcome to the Artillery Hornet 3D Printer User Manual. This guide provides comprehensive instructions for setting up, operating, maintaining, and troubleshooting your new 3D printer. The Artillery Hornet is designed for ease of use and high-quality printing, featuring a highly pre-assembled structure and advanced components for reliable performance.
2. 안전 정보
- 항상 환기가 잘 되는 곳에서 프린터를 작동하세요.
- 작동 중에는 움직이는 부분에 손이 닿지 않도록 주의하세요.
- Do not touch the hotend or heated bed during or immediately after printing, as they can reach high temperatures.
- 전원 공급 장치가 올바르게 연결되고 접지되었는지 확인하세요.
- Unplug the printer from the power source before performing any maintenance or cleaning.
- Keep the printer away from flammable materials and direct sunlight.
- Supervise children and pets when the printer is in operation.
3. 패키지 내용
개봉 후 모든 구성품이 있는지 확인해 주세요.
- Artillery Hornet 3D Printer (95% pre-assembled)
- 필라멘트 스풀 홀더
- 전원 케이블
- USB 케이블
- Tool Kit (wrenches, screwdrivers, etc.)
- SD Card with Test Files and Software
- 사용 설명서 (본 문서)
- Samp르 필라멘트
4. 제품 오버view
The Artillery Hornet features a robust metal integrated structure and a sleek design. Key components include:
그림 4.1: 전체 view of the Artillery Hornet 3D Printer.
Figure 4.2: Close-up of the innovative integrated cabling system, designed to prevent cable dangling and ensure a neat setup.
Figure 4.3: Details of the New Titan Extruder and Modular Hotend, crucial for stable and precise filament feeding and melting.
Figure 4.4: The self-developed 32-bit motherboard with replaceable drivers, enabling ultra-silent printing and enhanced performance.
Figure 4.5: The user-friendly one-key knob integrated switch for easy operation and the adjustable filament holder designed to maintain a low center of gravity.
5. 설정 가이드
The Artillery Hornet is designed for quick and easy assembly, being 95% pre-assembled. Follow these steps to complete the setup:
Figure 5.1: The printer arrives 95% pre-assembled, requiring only a few minutes for final setup.
- 짐 풀기: 포장에서 모든 구성 요소를 조심스럽게 제거합니다.
- Attach Gantry: Secure the pre-assembled gantry to the base unit using the provided screws. The integrated cabling simplifies this connection.
- 필라멘트 홀더를 설치하세요: Mount the adjustable filament holder to the designated slot on the side of the printer.
- 전원 연결: Plug the power cable into the printer and then into a grounded electrical outlet.
- 전원 켜기: Flip the power switch located at the rear of the base unit.
- 침대 수평 맞추기: Perform manual bed leveling as instructed on the printer's display or in the detailed guide on the included SD card. Proper bed leveling is crucial for successful prints.
6. 사용 설명서
Operating the Artillery Hornet is intuitive, thanks to its one-key knob integrated switch and efficient design.
6.1. 필라멘트 로딩
- Place your filament spool onto the adjustable filament holder.
- Feed the filament through the filament sensor and into the Titan Extruder.
- Heat the hotend to the appropriate temperature for your filament type (e.g., 200°C for PLA).
- Use the one-key knob to select the 'Load Filament' option. The extruder will automatically pull the filament through the hotend until it extrudes smoothly.
6.2. 인쇄 시작
- Prepare your 3D model using a slicing software (e.g., Cura, PrusaSlicer) and save it as a G-code file SD 카드에.
- SD 카드를 프린터의 SD 카드 슬롯에 삽입하세요.
- Navigate the menu using the one-key knob to 'Print from SD' and select your desired G-code file.
- The printer will automatically heat up the bed and hotend, then begin printing. The self-developed 32-bit motherboard ensures ultra-silent operation during printing.
영상 6.1: 공식 오버view of the Artillery Hornet 3D Printer, showcasing its features and printing capabilities.
7. 유지관리
Regular maintenance ensures optimal performance and longevity of your Artillery Hornet 3D Printer.
- 프린트 베드를 청소하세요: After each print, clean the print bed with isopropyl alcohol to ensure good adhesion for future prints.
- 노즐 청소: Periodically clean the nozzle to prevent clogs. Use a brass brush or needle to clear any residue.
- Lubricate Z-axis Rod: Apply a small amount of lithium grease or similar lubricant to the Z-axis lead screw every few months to ensure smooth vertical movement.
- 벨트 확인: Inspect the X and Y axis belts for proper tension and wear. Adjust if too loose or replace if damaged.
- 팬 청소: Ensure cooling fans (for hotend, part cooling, and power supply) are free from dust and debris to prevent overheating.
8. 문제 해결
다음은 몇 가지 일반적인 문제와 이에 대한 잠재적 해결책입니다.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 필라멘트가 먹이를 공급하지 않음 | Nozzle clog, tangled filament, incorrect loading. | Clear nozzle, untangle filament, re-load filament carefully ensuring it enters the Bowden tube correctly. |
| Poor print adhesion / Prints lifting | Unleveled bed, dirty print surface, incorrect bed temperature. | Re-level the print bed, clean the print surface with isopropyl alcohol, adjust bed temperature in slicing software. |
| Layering problems / Poor print quality | Loose belts, Z-axis wobble, incorrect print settings. | Check and tighten X/Y belts, ensure Z-coupler is secure, adjust print speed and temperature settings. |
| 프린터가 시끄럽습니다 | Loose components, worn bearings. | Check all screws and connections. The 32-bit motherboard is designed for silent operation, but external factors can cause noise. |
| 과열 문제 | Blocked cooling fans. | Ensure all cooling fans are clear of obstructions and functioning correctly. |
9. 사양
| 특징 | 사양 |
|---|---|
| 볼륨을 빌드하세요 | 220 x 220 x 250mm |
| 프린터 크기 | 17.1인치 깊이 x 16.1인치 너비 x 18.5인치 높이 |
| 품목 무게 | 17.6파운드(8킬로그램) |
| 재료 | 알류미늄 |
| 색상 | 노란색 |
| 압출기 유형 | New Titan Extruder |
| Hotend Type | Modular Hotend |
| 마더보드 | 32-bit with replaceable drivers |
| 집회 | 95% Pre-Assembled |
Figure 9.1: Dimensions of the Artillery Hornet 3D Printer.
10. 보증 및 지원
For warranty information and technical support, please refer to the documentation included with your product or visit the official Artillery web사이트. 보증 청구에 대비해 구매 증빙 자료로 구매 영수증을 보관하세요.
