BRIKSMAX LED Lighting Kit for LEGO 75257 Millennium Falcon Instruction Manual

제품 끝view

This instruction manual provides detailed guidance for installing and operating the BRIKSMAX LED Lighting Kit designed specifically for the LEGO 75257 Millennium Falcon model. The kit enhances the visual appeal of your LEGO set by illuminating various sections with LED lights. Please note that the LEGO building blocks model set is not included with this lighting kit.

무엇이 포함됩니까?

The BRIKSMAX LED Lighting Kit for the LEGO 75257 Millennium Falcon includes the following components:

• Dot Lights (various colors and lengths)
• Expansion Boards (8-port and 6-port)
• 케이블 연결
• Battery Holder (requires 3 AA batteries, not included)
• 접착 사각형
• USB 전원 케이블
• LEGO Plates (random colors, for integration)
• 사용 설명서

설치 가이드

Follow these steps carefully to install your BRIKSMAX LED Lighting Kit. Patience and attention to detail are essential for a successful installation. It is recommended to refer to the detailed video instructions for visual guidance.

일반 설치 완료view

Detailed Installation Steps (Part 2)

This video focuses on specific steps for integrating the lighting components into your LEGO Millennium Falcon model. Pay close attention to wire routing and component placement.

Additional Product Showcase

Observe the final appearance of the illuminated model from various angles to understand the intended lighting effects.

중요한 고려 사항:

• Handle wires and small components with care to prevent damage.
• 키트의 전원을 켜기 전에 모든 연결이 단단히 고정되었는지 확인하십시오.
• Refer to the included printed instructions for step-by-step diagrams.

작동 지침

To operate your BRIKSMAX LED Lighting Kit:

1. Insert 3 AA batteries (not included) into the battery holder. Ensure correct polarity.
2. Connect the battery holder to the main expansion board.
3. Alternatively, connect the USB power cable to the main expansion board and a compatible USB power source (e.g., power bank, USB wall adapter).
4. The lights should illuminate once power is supplied. This kit does not include a remote control.

유지

조명 장비의 수명과 최적의 성능을 보장하려면 다음 사항을 고려하십시오.

• Keep the kit clean and free from dust. Use a soft, dry cloth for cleaning.
• Avoid exposing the kit to excessive moisture or extreme temperatures.
• When not in use for extended periods, remove batteries from the battery holder to prevent leakage.
• Do not pull on the wires forcefully, as this can damage connections.

문제 해결

If you encounter issues with your BRIKSMAX LED Lighting Kit, consider the following:

• 조명이 켜지지 않음:
  • 배터리가 올바르게 삽입되었는지, 그리고 충전량이 충분한지 확인하십시오.
  • Ensure all connecting cables are securely plugged into the expansion boards and lights.
  • Verify that the power source (battery holder or USB) is functioning correctly.
• 깜빡이는 불빛:
  • 연결 부위가 헐거워지지 않았는지 점검하십시오.
  • Ensure wires are not pinched or damaged by LEGO bricks.
• Overheating or burning smell:
  • Immediately disconnect power. This indicates a short circuit or component malfunction. Recheck all wiring for proper insulation and connections. Contact customer support if the issue persists.

명세서

지원하다

For any difficulties or questions regarding your BRIKSMAX LED Lighting Kit, please contact our customer support team. We are committed to providing assistance and ensuring your satisfaction.

You can typically find contact information on the product packaging or the official BRIKSMAX web대지.