1. 서론
This manual provides detailed instructions for the setup, operation, and maintenance of your Waveshare 5.5-inch Capacitive Touch AMOLED Display. This high-resolution display features a 1080x1920 pixel AMOLED panel with 5-point capacitive touch control, protected by a toughened glass panel. It is designed for use with Raspberry Pi 4B and can also function as a general computer monitor.
2. 패키지 내용
아래 나열된 모든 구성품이 패키지에 포함되어 있는지 확인해 주십시오. 구성품이 누락되었거나 손상된 경우 고객 지원팀으로 문의해 주십시오.
Figure 2.1: Included components of the Waveshare 5.5-inch AMOLED Display kit.
- 5.5-inch HDMI AMOLED Display
- Protective Case (A)
- 냉각 팬
- HDMI 어댑터
- USB 어댑터
- Screw Pack (various sizes for assembly)
3. 제품의 특징 및 사양
The Waveshare 5.5-inch AMOLED Display offers advanced features for a superior visual and interactive experience.
그림 3.1: 이상view of display features.
기술 사양:
- 화면 크기: 5.5인치
- 해결: 1080x1920 pixels (H×V), portrait by default
- 디스플레이 패널 : 아몰레드
- 디스플레이 인터페이스 : HDMI
- 터치 타입 : 5포인트 정전식 터치
- 터치 패널: Toughened Glass, up to 6H hardness
- View각도: 170°
- 오디오 출력: 3.5mm 오디오 잭, HDMI 오디오 출력 지원
- 전원 입력: 5 볼트
- 품목 무게: 13.5 온스
- 패키지 크기: 9.17 x 6.57 x 2.83 인치
4. 설정 및 설치
4.1 시스템 호환성
The display is compatible with various operating systems, primarily for Raspberry Pi and as a secondary monitor for Windows systems.
Figure 4.1: Supported devices and operating systems.
- When used with Raspberry Pi: Supports Raspberry Pi OS, Ubuntu, Kali, and Retropie. For Raspberry Pi OS, 5-point touch is supported. For Ubuntu/Kali, single-point touch is supported. All are driver-free.
- When used as a computer monitor: Supports Windows 11/10/8.1/8/7.
- 중요 참고 사항: This display is specifically designed for use with Raspberry Pi 4B only.
4.2 연결 예amp레
Follow these steps to connect the display to your Raspberry Pi 4B.
그림 4.2: 라즈베리 파이 4B와의 연결.
- Assemble the protective case around the display and Raspberry Pi 4B, ensuring the cooling fan is properly installed.
- Connect the HDMI adapter from the display to the HDMI port on the Raspberry Pi 4B.
- Connect the USB adapter from the display's USB port to a USB port on the Raspberry Pi 4B. This provides power to the display and enables touch functionality.
- Ensure a stable 5V/3A power supply is connected to the Raspberry Pi.
주의: The glass panel of the AMOLED display is fragile without its enclosure. Exercise extreme care when handling. Always hold the Printed Circuit Board Assembly (PCBA) when plugging or unplugging HDMI and USB cables to prevent undue pressure on the glass panel.
5. 사용 설명서
5.1 화면 방향
The display's native resolution is 1080x1920, which means it operates in portrait mode by default. To change the display orientation to landscape, you will need to adjust the software configuration on your Raspberry Pi or connected computer. Refer to the operating system's display settings for specific instructions.
그림 5.1: 디스플레이 view각도를 나타냅니다.
5.2 터치 컨트롤
The display features a 5-point capacitive touch screen, allowing for multi-touch gestures. The number of supported touch points may vary depending on the operating system used.
Figure 5.2: Demonstrating 5-point touch control.
6. 외관 및 치수
Understanding the physical layout and dimensions of the display is important for integration into projects.
Figure 6.1: Physical dimensions and component layout.
- 전체 치수: Approximately 144.26mm (width) x 78.66mm (height) x 33.30mm (depth, including case).
- 주요 구성 요소: Includes a cooling fan vent for heat dissipation and clearly marked Raspberry Pi connectors for easy integration.
7. 문제 해결
If you encounter issues with your display, consider the following general troubleshooting steps:
- 디스플레이 없음: Ensure all HDMI and USB connections are secure. Verify the Raspberry Pi is powered on and outputting video. Check the display's power connection.
- 터치 없이 작동하는 기능: Confirm the USB connection for touch is properly established. Ensure your operating system drivers are correctly configured (though most are driver-free, specific OS versions might require adjustments).
- 화면 방향이 잘못되었습니다: Adjust the display settings within your operating system's configuration.
- 깜빡이거나 왜곡된 이미지: Check HDMI cable integrity. Ensure the power supply to the Raspberry Pi is sufficient and stable.
8. 지원
For further technical support, detailed documentation, or warranty information, please visit the official Waveshare website or contact their customer service department. Online user manuals and additional resources are typically available on the manufacturer's product page.
웨이브쉐어 공식 계정 Web대지: www.waveshare.com
