LE Solar 실외 동작 감지 조명 WL4000 사용 설명서

1. 서론

This manual provides detailed instructions for the installation, operation, and maintenance of your LE Solar Outdoor Motion Sensor Light, model WL4000. Please read this manual thoroughly before use to ensure proper function and longevity of the product.

이미지 1.1: 이상view of the LE Solar Outdoor Motion Sensor Light WL4000.

2. 제품 특징

• 넓은 조명 각도: Features 3 adjustable heads providing 270° wide lighting coverage.
• 고휘도 : Delivers 1000 lumens of 6500K daylight illumination.
• 효율적인 태양열 충전: Converts sunlight into electricity, charging during the day for night operation.
• PIR 모션 센서 : Detects motion within 16-26 feet and a 120° angle, automatically turning the light on.
• 자동 작동: Stays off during the day, charges in sunlight, and turns on for 20 seconds when motion is detected at night.
• 내구성 및 방수성: IP65 waterproof rating ensures resistance to water, heat, and frost for reliable outdoor performance.
• 간편한 설치: Wireless design requires no household electrical circuit, simplifying mounting with included hardware.

Image 2.1: Product dimensions and adjustable light heads.

Image 2.2: The 270-degree wide lighting angle.

이미지 2.3: 모션 센서 감지 범위 및 각도.

3. 패키지 내용

• LE Solar Outdoor Motion Sensor Light (WL4000)
• 장착 하드웨어(나사 및 벽 앵커)
• 사용자 설명서

4. 설정 및 설치

Follow these steps for proper installation of your solar light:

1. 위치를 선택하세요: Select an outdoor location that receives direct sunlight for at least 8 hours a day to ensure optimal charging. The recommended installation height is 1.5-3.5 meters (5-12 feet).
2. L을 설치하세요amp 보유자: Use the included screws and wall anchors to securely fix the lamp holder to the desired exterior wall.
3. 빛을 활성화하세요: Locate the power switch on the back of the light unit. Press the button to turn the light ON.
4. 빛을 걸어라: Carefully hang the solar light unit onto the installed lamp 보유자.
5. 라이트 헤드 조정: Adjust the three light heads and the solar panel to your preferred angles for optimal lighting coverage and sun exposure.

이미지 4.1: 단계별 설치 과정.

Image 4.2: Fixing the lamp 나사가 있는 홀더.

Image 4.3: Activating the light using the mode switch.

Image 4.4: Hanging the light onto the lamp 보유자.

5. 사용 설명서

The LE Solar Outdoor Motion Sensor Light operates automatically based on ambient light and motion detection.

• 주간 운영: The light will remain off during the day and the solar panel will charge the internal battery using sunlight. Ensure the solar panel is clean and exposed to direct sunlight for optimal charging.
• 야간 운영: Once it gets dark, the motion sensor becomes active. When motion is detected within its 16-26 ft range and 120° angle, the light will automatically turn on at full brightness.
• 자동 차단 : The light will automatically turn off approximately 20 seconds after no further motion is detected.

Image 5.1: Solar charging and motion-activated lighting cycle.

6. 유지관리

To ensure optimal performance and extend the lifespan of your solar light, follow these maintenance guidelines:

• 태양광 패널 청소: 부드러운 천으로 태양광 패널을 정기적으로 닦아주세요.amp 먼지, 오물 및 이물질을 제거하는 천입니다. 패널이 깨끗해야 햇빛을 효율적으로 흡수하고 충전할 수 있습니다.
• 장애물 제거: Ensure no trees, bushes, or other objects are blocking direct sunlight from reaching the solar panel, especially during peak sunlight hours.
• 손상 여부 검사: Periodically check the light for any physical damage, loose connections, or signs of wear.
• 내후성: The light is designed with IP65 waterproofing, making it resistant to rain, heat, and frost. However, extreme weather conditions may temporarily affect performance.

Image 6.1: IP65 waterproof, heat, and frost resistance features.

7. 문제 해결

If your solar light is not functioning as expected, consider the following common issues and solutions:

• 밤에 불이 켜지지 않습니다:
  • 전원 스위치가 ON 위치에 있는지 확인하십시오.
  • Verify the solar panel is receiving sufficient direct sunlight (at least 8 hours) during the day. Relocate if necessary.
  • Check if the solar panel is dirty or obstructed. Clean it thoroughly.
  • Confirm it is dark enough for the light to activate. The light has a built-in photocell sensor.
• Light stays on for a short period or is dim:
  • Insufficient charging due to cloudy weather, shade, or a dirty solar panel. Allow for more charging time or clean the panel.
  • The battery may not be fully charged. Ensure optimal sun exposure.
• 동작 센서가 감지하지 못하고 있습니다:
  • 센서가 가려지지 않았는지 확인하세요.
  • Verify the light is installed within the recommended height range (1.5-3.5 meters).
  • Test the sensor by walking within its detection range.

8. 사양

9. 보증 및 지원

For warranty information or technical support, please contact Lepro Customer Service. Details regarding your product's warranty period can be found with your purchase documentation or by contacting the seller directly. Please retain your proof of purchase for any warranty claims.