1. 안전 정보
본 제품을 설치하거나 작동하기 전에 모든 안전 지침을 주의 깊게 읽어 주십시오. 이 지침을 따르지 않을 경우 감전, 화재 또는 기타 위험이 발생할 수 있습니다.
- 전원: 제공된 전원 어댑터만 사용하십시오. 전원 공급 장치의 전압이 정상인지 확인하십시오.tage는 제품 요구 사항과 일치합니다.
- 물과 습기: Do not expose this product to water, moisture, or extreme humidity. Avoid installation in areas where water contact is possible.
- 열: Do not install near heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.
- 통풍: 적절한 환기를 확보하세요 amplifier unit. Do not block any ventilation openings.
- 설치: Installation should be performed by qualified personnel following local electrical codes. Ensure all wiring is secure and properly insulated.
- 청소: Disconnect power before cleaning. Use a dry cloth only. Do not use liquid cleaners or aerosol cleaners.
- 서비스: 이 제품을 직접 수리하려고 하지 마십시오. 모든 서비스는 자격을 갖춘 서비스 담당자에게 문의하십시오.
2. 제품 오버view
The Herdio 5.25'' Home Audio Package provides a versatile sound solution for various indoor environments. It includes a wall-mount Bluetooth amplifier receiver and two 5.25-inch in-ceiling passive speakers. The system supports multiple audio input options, including Bluetooth, AUX, and USB, along with a microphone input for paging or announcements.
2.1. Wall Mount Bluetooth Amp리시버 리시버
이 컴팩트 amplifier unit is designed to fit into a standard wall plate, offering convenient access to controls and connectivity. It features a master volume knob, input selection switch, USB port for media playback and device charging, a 3.5mm AUX-in jack, and a 1/4'' MIC-in jack.
그림 1: 벽면 장착 Amplifier Controls. This image displays the front panel of the wall-mount amplifier, detailing the power LED, input selection switch (AUX, BT, MIC), USB port, master volume/power knob, MIC IN jack, and AUX IN jack.
Figure 2: USB Interface. This image shows a USB flash drive inserted into the USB input port on the wall-mount amplifier, illustrating its function for media playback or device charging.
2.2. 5.25-inch In-Ceiling Passive Speakers
The system includes two 5.25-inch passive speakers designed for flush mounting in ceilings or walls. These speakers are engineered to reproduce clear sound with good responsiveness, suitable for various audio applications.
Figure 3: In-Ceiling Speaker Design. This image highlights the speaker's design, emphasizing its powerful bass capabilities and integrated coaxial tweeter for balanced audio output.
3. 상자 안에 무엇이 들어있나요?
내용물을 조심스럽게 풀어서 모든 품목이 들어 있는지 확인하세요.
- 1x Bluetooth In-Wall Audio Receiver Wall Plate
- 1x12V 전원 공급 장치
- 2x Screws for Wall Plate Installation
- 2x 5.25-inch In-Ceiling Speakers (Model HCS-528)
- 스피커 케이블 2개
- 1x User Manual for Amp리퍼
- 1x User Manual for Speakers
- 2x Gaskets for Speakers
- 1x Cutout Template for Speakers
Figure 4: Package Contents. This image displays all components included in the Herdio 5.25'' Home Audio Package, laid out for verification.
Video 1: Herdio Home Audio Package Unboxing. This video demonstrates the unboxing process and shows all included components of the Herdio audio package.
4. 설정
4.1. 벽걸이 Amp라이터 설치
- 벽 준비: Ensure you have a standard electrical wall box available for installation.
- 전원 케이블 연결: Connect the 12V DC power cable (red positive, black negative) to the two-pin connector on the back of the amp리퍼 모듈.
- 오디오 케이블 연결: Connect the stereo input audio cable to the three-pin connector on the back of the amp리퍼 모듈.
- 마운트하다 Amp정수기: 조심스럽게 삽입하세요 amplifier module into the wall box. Secure it using the provided screws.
- 페이스플레이트 부착: 장식용 전면판을 위에 놓으세요 amp증폭기를 설치하고 고정하십시오.
그림 5: 벽면 장착 Amplifier Installation. This image illustrates the process of installing the wall-mount amplifier into a standard electrical box.
Video 2: Herdio Wall Mount Amplifier Installation. This video provides a step-by-step guide on how to install the wall-mount amp리파이어 시스템.
4.2. Ceiling Speaker Installation
- 위치를 결정하세요: Choose appropriate locations in the ceiling or wall for the speakers, ensuring no obstructions behind the surface.
- 절단된 오프닝: Use the provided cutout template to mark and cut a circular opening in the ceiling/wall. The cutout diameter is 7.3 inches (18.5 cm).
- Remove Speaker Grille: Gently remove the speaker grille using a small tool or screwdriver.
- 스피커 삽입: 스피커를 잘라낸 구멍에 삽입하세요.
- 보안 스피커: Tighten the speaker clips with screws to firmly secure the speaker in place.
- 그릴 교체: Carefully place the speaker grille back onto the speaker.
Figure 6: Installation Dimensions. This diagram provides the total speaker diameter (8.46 inches / 21.5 cm), cutout diameter (7.3 inches / 18.5 cm), speaker depth (4.33 inches / 11 cm), and wall plate dimensions (4.5 inches / 11.43 cm height, 2.75 inches / 6.89 cm width).
Figure 7: Removing Speaker Grille. This image shows how to carefully remove the speaker's protective grille.
Figure 8: Securing Speaker Clips. This image demonstrates tightening the speaker clips with screws to ensure a secure fit in the ceiling or wall.
Figure 9: Replacing Speaker Grille. This image shows the final step of placing the speaker grille back onto the installed speaker.
4.3. 시스템 배선
- Connect Speaker Wires to Speakers: Connect the provided speaker wires to the terminals on the back of each speaker. Ensure red wire connects to positive (+) and black wire to negative (-).
- Connect Speaker Wires to Amp정수기: Connect the other end of the speaker wires to the speaker output terminals on the back of the wall-mount amplifier. Use a screwdriver to loosen the terminal screws, insert the wires (red to SPK+, black to SPK-), and tighten the screws to secure the connection.
- 전원 공급 장치 연결: Plug the 12V power supply into a standard electrical outlet and connect its DC plug to the 12V DC input jack on the wall-mount amp리퍼.
Video 3: Wiring and Bluetooth Pairing. This video demonstrates how to connect the speaker cables to the amplifier and speakers, and then how to pair a Bluetooth device.
5. 사용 설명서
5.1. 전원 켜기/끄기 및 볼륨 조절
To power on the system, turn the master volume knob clockwise. You will hear an audible 'drop' sound, and the power LED (PWR) will illuminate. Continue turning the knob clockwise to increase the volume. To power off, turn the knob counter-clockwise until it clicks.
5.2. 입력 선택
입력 선택 스위치를 사용하십시오. amplifier's front panel to choose between AUX, BT (Bluetooth), or MIC inputs.
5.3. 블루투스 페어링
- Switch the input selector to 'BT'. The Bluetooth LED will flash, indicating it is in pairing mode.
- 모바일 기기(스마트폰, 태블릿 등)에서 Bluetooth를 활성화하고 사용 가능한 기기를 검색하세요.
- Select 'Herdio' from the list of available devices to pair.
- Once successfully paired, the Bluetooth LED on the amplifier will remain steadily lit.
- You can now play audio from your device through the Herdio speaker system.
5.4. Using USB Input
Insert a USB flash drive into the USB INPUT port for media playback. The amp앰프는 자동으로 오디오를 감지하고 재생합니다. files. This port also functions as a charging port for compatible devices (5V/1A).
5.5. Using AUX-In
Connect an external audio device (e.g., MP3 player, TV) to the 3.5mm AUX IN jack using a stereo audio cable. Switch the input selector to 'AUX' to play audio from the connected device.
5.6. Using MIC-In
Connect a microphone to the 1/4'' MIC IN jack. Switch the input selector to 'MIC' for microphone input. This feature is suitable for paging or making announcements.
6. 유지관리
To ensure the longevity and optimal performance of your Herdio audio system, follow these maintenance guidelines:
- 청소: 부드럽고 건조한 천을 사용하여 청소하십시오. amplifier faceplate and speaker grilles. Avoid abrasive cleaners, solvents, or harsh chemicals.
- 먼지 제거: 스피커 그릴에 먼지가 쌓여 음질에 영향을 미치는 것을 방지하기 위해 정기적으로 먼지를 제거하십시오.
- 환경 조건: Keep the system in a dry environment, away from direct sunlight, extreme temperatures, and excessive dust.
- 배선 검사: Periodically check all wiring connections for tightness and signs of wear. Loose connections can lead to poor sound quality or intermittent operation.
7. 문제 해결
If you encounter issues with your Herdio audio system, refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 스피커에서 소리가 나지 않음 |
|
|
| 블루투스가 연결되지 않습니다 |
|
|
| 왜곡된 소리 |
|
|
| USB 재생이 작동하지 않습니다 |
|
|
8. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델명 | HCS 528-16BT |
| 장착 유형 | Ceiling Mount (Speakers), Wall Mount (Amp리피어) |
| 스피커 유형 | Surround Sound, 2-Way In-Ceiling Passive Speakers |
| 스피커 크기 | 5.25인치(우퍼), 1인치(트위터) |
| 스피커 최대 출력 전력 | 300 와트 |
| 주파수 응답 | 20 kHz (XNUMX kHz) |
| 연결 기술 | 블루투스 |
| 무선 통신 기술 | 블루투스 |
| 블루투스 범위 | 30 미터 |
| 특별 기능 | AUX Input, USB Input (Media Playback/Charging), MIC Input |
| 전원 | 유선 전기(12V DC) |
| 제품 치수 (Amp리피어) | 4.5"H x 2.75"W (Wall Plate) |
| 제품 크기 (스피커 포함) | 8.46"D x 7.3"W x 4.33"H (Total Diameter x Cutout Diameter x Depth) |
| 재료 | 아크릴로니트릴 부타디엔 스티렌(ABS) |
| 품목 무게 | 7.04 pounds (Total Package) |
| 실내/실외 사용 | 실내 |
9. 보증 및 지원
This Herdio product is covered by a 1년 서비스 보증 구매일로부터. 본 보증은 정상적인 사용 중에 발생한 제조상의 결함 및 제조상의 결함을 보장합니다.
보증은 다음으로 인한 손상을 보장하지 않습니다.
- 부적절한 설치 또는 작동.
- Accidents, misuse, abuse, or negligence.
- 무단 수리 또는 개조.
- Power surges or lightning strikes.
For warranty claims, technical support, or customer service, please contact Herdio customer support through your retailer or visit the official Herdio web연락처 정보 사이트.
