Chicago Pneumatic Digital Timer

Chicago Pneumatic Digital Timer for Lamps & Appliances User Manual

Model: Digital Timer

브랜드: 시카고 뉴매틱

소개

This manual provides essential instructions for the safe operation, installation, and maintenance of your Chicago Pneumatic Digital Timer for Lamps & Appliances. Please read this manual thoroughly before using the product and retain it for future reference. Proper use ensures optimal performance and extends the product's lifespan.

안전 지침

부상이나 제품 손상을 방지하려면 항상 다음 안전 예방 조치를 준수하세요.

  • 타이머를 물에 담그거나 과도한 습기에 노출시키지 마십시오.
  • Do not exceed the maximum load rating specified for the timer.
  • 타이머가 접지된 콘센트에 단단히 꽂혀 있는지 확인하세요.
  • Do not disassemble or attempt to repair the timer yourself. Contact qualified service personnel.
  • 어린이의 손이 닿지 않는 곳에 보관하세요.
  • 청소하기 전에 타이머의 전원 플러그를 콘센트에서 뽑으세요.

패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

  • 1 x Chicago Pneumatic Digital Timer
  • 1 x 사용자 매뉴얼(이 문서)

제품 끝view

Familiarize yourself with the components of your digital timer.

앞쪽 view of the Chicago Pneumatic Digital Timer, showing the display screen and control buttons.

그림 1: 앞쪽 view of the Chicago Pneumatic Digital Timer. This image displays the digital screen, which shows the current time and programming status, along with various control buttons for setting programs, adjusting time, and manual override.

The timer features a clear digital display, multiple programming buttons, and a power outlet for connecting appliances.

설정

  1. 초기 청구 : Before first use, plug the timer into a live electrical outlet for at least 30 minutes to charge the internal battery. This battery retains settings during power outag에스.
  2. 모든 설정 지우기: Press the "RESET" button (often a small recessed button requiring a pen tip) to clear all previous settings and restore factory defaults.
  3. 현재 시간 설정:
    • "시계" 버튼을 누르세요.
    • Use the "HOUR" and "MINUTE" buttons to set the current time.
    • Use the "WEEK" button to set the current day of the week.
    • Press "CLOCK" again to confirm and exit time setting mode.

작동 지침

ON / OFF 시간 프로그래밍

The timer allows for multiple ON/OFF programs. Follow these steps to set a program:

  1. Press the "PROG" button. The display will show "1 ON".
  2. Use "WEEK" to select the day(s) for this program (e.g., MO, TU, WE, TH, FR, SA, SU, or combinations like MO-FR, SA-SU, MO-SU).
  3. Use "HOUR" and "MINUTE" to set the desired ON time.
  4. Press "PROG" again. The display will show "1 OFF".
  5. Use "WEEK", "HOUR", and "MINUTE" to set the desired OFF time for the same program.
  6. 추가 프로그램(예: "1 ON", "2 OFF" 등)에 대해서는 2~5단계를 반복하십시오.
  7. After setting all programs, press the "CLOCK" button to return to the current time display.

수동 오버라이드

To manually switch the timer's output ON or OFF, or to cycle through modes:

  • Press the "MANUAL" or "ON/AUTO/OFF" button repeatedly.
  • The display will cycle through "ON" (always on), "AUTO" (follows programs), and "OFF" (always off). Select "AUTO" for programmed operation.

가전제품 연결하기

Plug the appliance you wish to control into the outlet on the front of the digital timer. Ensure the appliance's power switch is in the ON position if it has one, so the timer can control its power supply.

유지

  • 청소: Disconnect the timer from the power outlet. Wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • 저장: 사용하지 않을 때에는 타이머를 서늘하고 건조한 곳에 보관하십시오.
  • 배터리: The internal battery is designed for long life and typically does not require replacement. If the display becomes dim or settings are frequently lost, ensure the timer is regularly plugged in to charge the battery.

문제 해결

문제가능한 원인해결책
타이머가 설정된 시간에 켜지거나 꺼지지 않습니다.
  • Timer is in "ON" or "OFF" manual mode.
  • 프로그램 설정이 잘못되었습니다.
  • 기기의 전원 스위치가 꺼져 있습니다.
  • Press "MANUAL" or "ON/AUTO/OFF" until "AUTO" is displayed.
  • Review 그리고 프로그램 설정을 다시 신중하게 입력하십시오.
  • 제품의 전원 스위치가 켜져 있는지 확인하십시오.
디스플레이가 비어 있거나 어둡습니다.
  • 내장 배터리 잔량이 부족합니다.
  • 콘센트에 전원이 들어오지 않습니다.
  • Plug the timer into a live outlet for at least 30 minutes to charge.
  • 차단기를 확인하거나 다른 기기를 사용하여 콘센트를 테스트해 보세요.
전원이 꺼지면 설정이 사라집니다.tage.내부 배터리가 충분히 충전되지 않았습니다.Plug the timer into a live outlet for several hours to fully charge the internal battery.

명세서

모델디지털 타이머
상표시카고 뉴매틱
재료플라스틱
품목 무게8.4 온스
패키지 크기7.68 x 7.44 x 3.86 인치
한국어:367877920504
ASINB082P3B3TY
전력 정격(특정 볼륨에 대한 제품 라벨 참조)tage/amp분노)

보증 및 지원

Chicago Pneumatic products are manufactured to high-quality standards. For warranty information, please refer to the warranty card included with your purchase or visit the official Chicago Pneumatic web사이트. 구매 증빙 자료로 구매 영수증을 보관하세요.

For technical support, troubleshooting assistance beyond this manual, or to inquire about replacement parts, please contact Chicago Pneumatic customer service. Contact details can typically be found on the product packaging or the official brand web대지.

온라인 리소스: 추가 지원 및 제품 정보는 공식을 방문하세요. 시카고 뉴매틱 web대지.

관련 문서 - 디지털 타이머

사전view Chicago Pneumatic Hand Held Pneumatic Sanders & Polishers Safety Instructions
Essential safety instructions for Chicago Pneumatic hand-held pneumatic sanders and polishers. Read before use to ensure safe operation and prevent injury. Covers multiple languages.
사전view Chicago Pneumatic SQUEEZER Operator's Manual
Official operator's manual for the Chicago Pneumatic SQUEEZER tool, detailing specifications, operation, maintenance, and safety instructions for models CP4210CS, CP4220CS, CP4210AL, CP4220AL, CP4210AS, and CP4220AS.
사전view Digital Timer Instruction Manual - User Guide
Comprehensive instruction manual for operating a digital timer, covering safety, technical data, time setting, programming, special functions like random and countdown modes, and day combinations.
사전view Chicago Pneumatic 공압 드라이버: 안전 정보 및 기술 데이터
시카고 뉴매틱(Chicago Pneumatic) 공압 스크루드라이버(CP2810, CP2811, CP2812, CP2814, CP2822, CP2824)에 대한 필수 안전 정보, 기술 사양 및 작동 지침입니다. 이 설명서는 전문 및 산업용 애플리케이션에 대한 중요한 안전 경고, 용도 및 성능 데이터를 제공합니다.
사전view Chicago Pneumatic CP860 Series Die Grinder Parts List and Diagram
자세한 부품 목록 및 분해도 view diagram for Chicago Pneumatic CP860, CP860E, CP860ES, and CP860ESE pneumatic die grinders. Includes part numbers and quantities.
사전view Chicago Pneumatic CP872 다이 그라인더 사용 설명서
Chicago Pneumatic CP872 다이 그라인더에 대한 포괄적인 사용 설명서로, 작동, 윤활, 유지관리, 안전 지침 및 기술 사양을 다루고 있습니다.