소개
This instruction manual provides essential information for the safe and proper assembly, use, and maintenance of your Ickle Bubba Coleby Classic Cot Bed. Please read this manual thoroughly before assembly and retain it for future reference.
The Ickle Bubba Coleby Classic Cot Bed is a versatile 3-in-1 convertible cot designed to grow with your child, suitable from birth up to approximately 4 years of age. It features an adjustable mattress base and protective teething rails.
안전 정보
- Always ensure all assembly fittings are tightened correctly. Regularly check all fittings and re-tighten as necessary.
- Do not use the cot bed if any parts are broken, torn, or missing. Contact Ickle Bubba for replacement parts.
- The mattress base is adjustable to three heights. The lowest position is the safest when the child can sit unaided.
- Ensure the cot bed is placed on a firm, horizontal surface.
- Do not place the cot bed near open fires or other sources of strong heat, such as electric bar fires, gas fires, etc.
- Do not leave anything in the cot bed that could provide a foothold for your child to climb out, or present a danger of suffocation or strangulation.
- The cot bed is designed for one child only.
- The maximum mattress thickness for this cot bed is 10cm.
구성품 목록
Before assembly, please verify that all components are present and undamaged. Refer to the assembly diagram for identification of parts.
| 부분 | 설명 | 수량 |
|---|---|---|
| A | Cot End Panels (Headboard/Footboard) | 2 |
| B | Cot Side Rails (Fixed) | 2 |
| C | 매트리스베이스 | 1 |
| D | Teething Rails (Pre-fitted on side rails) | 2 |
| E | Hardware Pack (Bolts, Barrel Nuts, Allen Key) | 1세트 |
설정 및 조립
Assembly requires two adults. Ensure you have adequate space and all components before beginning. Do not use power tools for assembly as this may overtighten fittings and cause damage.
Step 1: Attach Side Rails to End Panels (Cot Mode)
Align the holes on the cot side rails (B) with the pre-drilled holes on the cot end panels (A). Secure using the provided bolts and barrel nuts from the hardware pack (E). Ensure the teething rails (D) are facing upwards and inwards.
이미지: 측면 view of the Ickle Bubba Coleby Classic Cot Bed, showing the assembled frame.
Step 2: Install Mattress Base
The mattress base (C) can be set at three different heights. Choose the appropriate height based on your child's age and development:
- 가장 높은 위치: For newborns and infants who cannot sit up unaided. This allows easier access to your baby.
- 중간 위치: For babies who are starting to sit up.
- 가장 낮은 위치: For babies who can sit unaided or pull themselves to a standing position. This is the safest position to prevent climbing out.
Insert the mattress base (C) into the grooves on the cot end panels (A) at your desired height. Secure it with the remaining hardware. Ensure the base is level and firmly secured.
Image: Cot bed with mattress base in the highest position.
Image: Cot bed with mattress base in the middle position.
Image: Cot bed with mattress base in the lowest position.
유아용 침대로 전환
To convert the cot into a toddler bed, remove both cot side rails (B). The cot end panels (A) will serve as the headboard and footboard for the toddler bed. Ensure the mattress base (C) is set to the lowest position for the toddler bed configuration. No additional parts are required for this conversion.
Image: The Ickle Bubba Coleby Classic Cot Bed converted into a toddler bed.
작동 지침
매트리스 배치
Place a suitable mattress (not included) onto the mattress base. The recommended mattress size for this cot bed is 140cm x 70cm, with a maximum thickness of 10cm. Ensure there are no gaps larger than 30mm between the mattress and the sides of the cot bed.
매트리스 높이 조절하기
To adjust the mattress height, you will need to partially disassemble the cot. Carefully remove the mattress and mattress base. Re-attach the mattress base to the desired height setting using the appropriate pre-drilled holes on the end panels. Always ensure all fittings are securely tightened after adjustment.
유지 보수 및 관리
- 청소: 광고로 깨끗이 닦아내세요amp cloth and mild detergent. Do not use abrasive cleaners or strong chemicals. Dry thoroughly after cleaning.
- 검사: Regularly inspect all components for wear and tear, loose fittings, or damage. Pay particular attention to the teething rails.
- 피팅 : Periodically check and re-tighten all bolts and screws to ensure the cot bed remains stable and secure.
- 저장: If storing the cot bed, disassemble it carefully and store all parts in a dry, cool place away from direct sunlight and extreme temperatures.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Cot bed feels wobbly or unstable. | 느슨한 피팅. | Check and tighten all bolts and screws using the provided Allen key. Do not overtighten. |
| 조립 중 부품이 정렬되지 않습니다. | 부품의 방향이 잘못되었거나 구멍이 잘못 정렬되었습니다. | Review the assembly instructions and diagrams. Ensure parts are oriented correctly. Gently wiggle parts to align holes before tightening. |
| Teething rails show signs of wear. | Normal use by child. | The teething rails are designed to protect the cot. Monitor wear and ensure no small pieces are detaching. Contact Ickle Bubba for replacement parts if necessary. |
명세서
| 특징 | 세부 사항 |
|---|---|
| 상표 | 이클 부바 |
| 모델 번호 | 44-001-000-801 |
| 색상 | 하얀색 |
| 제품 크기(L x W x H) | 144cm x 75cm x 95cm |
| 재료 | 엔지니어링 목재 |
| 품목 무게 | 18kg |
| 특별 기능 | Adjustable Height (3 mattress base positions), Teething Rails |
| 대상 청중 | Infant to Toddler (Birth to approx. 4 years) |
| 전향 가능성 | Converts from Cot to Toddler Bed |
| 권장 매트리스 크기 | 140cm x 70cm (Max thickness 10cm) |
Image: Diagram showing the dimensions of the Ickle Bubba Coleby Classic Cot Bed.
보증 및 지원
Ickle Bubba products are manufactured to high-quality standards. For information regarding warranty coverage, product registration, or to obtain replacement parts, please visit the official Ickle Bubba web사이트를 방문하거나 고객 지원팀에 직접 문의하세요.
Web대지: www.icklebubba.com
연락하다: 참조 website for current contact details, including phone numbers and email addresses for customer service.
