Ingenuity Summer Infant Multi-Function Walk-Thru Baby Gate

1. 안전 정보

Please read and follow all instructions carefully before installation and use of this product. Failure to do so could result in serious injury or death.

• Always ensure the gate is securely installed and latched before leaving a child or pet unattended.
• This gate is designed for use with children from 6 to 24 months.
• Never use at the top of stairs without the included hardware installation kit.
• Periodically check all fasteners and hardware to ensure they are tight and secure.
• Do not use this gate if any parts are missing, damaged, or broken. Contact customer support for replacement parts.
• 조립하는 동안 작은 부품을 어린이의 손이 닿지 않는 곳에 보관하세요.
• Install with the warning label side AWAY from the child.

2. 제품 오버view

The Ingenuity Summer Infant Multi-Function Walk-Thru Baby Gate is a durable and versatile safety gate designed for both indoor and outdoor use. It fits openings from 27.5 inches to 42 inches wide and stands 28 inches tall, making it suitable for doorways and stairways.

주요 특징:

• 실내 및 실외 사용: Constructed from rugged plastic, suitable for various environments.
• 안전한 설치: Includes a hardware kit for secure mounting in doorways or at the top/bottom of stairs.
• No Threshold Design: The suspended door design minimizes tripping hazards.
• 추가 안정성: Features a support foot for enhanced stability.
• Door Stopper: Helps prevent the door from swinging outward over stairs.

Image 2.1: The Ingenuity Summer Infant Multi-Function Walk-Thru Baby Gate in gray, showing its expandable design.

3. 상자 안에 무엇이 들어있나요?

• 1 x Baby Gate
• 1 x Hardware Kit (for installation)

4. 설정 및 설치

This gate requires hardware installation for secure placement. Recommended tools include a drill, Phillips-head screwdriver, pencil, and measuring tape.

1. 측정 개방: Ensure your opening is between 27.5 and 42 inches wide.
2. 위치 게이트: Place the gate in the desired opening. Ensure the warning label side faces away from the child's area.
3. 마크 장착 지점: Use a pencil to mark the locations for the mounting brackets on both sides of the opening.
4. 드릴 파일럿 홀: Drill pilot holes at the marked locations according to the hardware kit instructions.
5. 브래킷 부착: Securely attach the mounting brackets to the wall or door frame using the provided screws.
6. Gate를 설치하세요: Mount the gate onto the installed brackets. Ensure the gate is level and opens/closes smoothly.
7. 맞춤 조정: Extend the gate panels as needed to fit the opening snugly. Tighten any adjustment mechanisms to ensure a secure fit.
8. 보안 테스트: Firmly push and pull on the gate to confirm it is securely installed and does not move.

Image 4.1: The gate installed in a doorway, demonstrating its use in an indoor setting.

Image 4.2: The gate installed at the bottom of outdoor stairs, showcasing its outdoor capability.

Image 4.3: The gate installed at the top of indoor stairs, highlighting its secure hardware mount.

5. 사용 설명서

To open the gate, locate the latch mechanism. This gate features a two-step release for added safety.

1. 터놓다: Push down on the latch mechanism and simultaneously pull out the tab.
2. 열려 있는: While holding the tab out, lift the arm of the gate. The gate will then swing open.
3. 닫다: Swing the gate back into the closed position. Ensure it aligns with the latch mechanism.
4. 잠그다: Push the arm of the gate down until it clicks securely into the latch mechanism. Verify that the gate is locked by gently pushing on it.

6. 유지관리

정기적인 유지보수는 출입문의 수명 연장과 안전한 작동을 보장합니다.

• 청소: 광고로 문을 닦으세요amp 천과 순한 비누를 사용하십시오. 연마성 세제나 독한 화학 약품은 사용하지 마십시오.
• 점검: Periodically inspect the gate for any signs of wear, damage, or loose components. Check hinges, latches, and mounting points.
• 저장: If storing the gate, ensure it is clean and dry. Store in a cool, dry place away from direct sunlight.

7. 문제 해결

• 문이 제대로 잠기지 않음:
  • Check if the gate is properly aligned with the latch mechanism.
  • Ensure all mounting hardware is tightened.
  • Verify the opening width is within the specified range (27.5"-42").
• 설치 후 문이 흔들거립니다:
  • Re-check all hardware connections and tighten them.
  • Ensure the support foot is properly extended and stable.
  • Confirm the gate is installed on a flat, stable surface.
• 문을 열고 닫는 데 어려움이 있습니다.
  • Ensure the two-step release mechanism (push down and pull tab) is performed correctly.
  • Check for any obstructions around the gate's swing path.

8. 사양

9. 보증 정보

This product comes with a limited manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms, conditions, and duration. Retain your proof of purchase for warranty claims.

10. 고객 지원

For further assistance, replacement parts, or to inquire about warranty service, please contact Ingenuity customer support. Contact details can typically be found on the product packaging or the official Ingenuity web대지.

온라인: Visit the official Ingenuity webFAQ 및 지원 리소스를 위한 사이트입니다.

핸드폰: 제품 포장에 기재된 고객 서비스 전화번호를 참조하십시오.