소개
This manual provides detailed instructions for the installation, operation, and maintenance of your YuanLey 5 Port Gigabit PoE Switch. This unmanaged switch features 4 PoE+ ports and 1 Gigabit uplink port, designed for reliable network expansion and Power over Ethernet (PoE) device connectivity.
The YuanLey 5 Port Gigabit PoE Switch, a compact and efficient networking solution.
패키지 내용
아래 나열된 모든 품목이 패키지에 포함되어 있는지 확인하세요.
- 1 x 5 Ports 100/1000Mbps PoE+ Switch
- 1 x AC 전원 케이블
- 4 x Screws with nuts
- 2 x Hanger (Mounting Brackets)
- 1 x 사용자 설명서
The YuanLey 5 Port Gigabit PoE Switch and its included accessories, such as the power cable and mounting brackets.
Video demonstrating the unboxing and contents of the YuanLey 5 Port Gigabit PoE Switch.
제품 끝view 및 주요 특징
All Gigabit Ports
The switch includes 4 Gigabit PoE+ ports and 1 Gigabit uplink Ethernet port. All ports support speeds up to 100/1000Mbps, ensuring excellent network performance.
앞쪽 view of the YuanLey 5 Port Gigabit PoE Switch, highlighting the 4 PoE+ ports and 1 uplink port.
High PoE Power
Supports IEEE 802.3af/at PoE power supply standards. The total power budget is 78W, with up to 30W available per port. This is suitable for powering multiple PoE devices.
Diagram illustrating the 78W total PoE power and 30W per port capability of the YuanLey switch.
Unmanaged Plug & Play
This is an unmanaged switch, meaning no configuration is required. Simply plug in your devices, and it will automatically detect and connect both PoE and non-PoE devices such as PoE cameras, wireless access points (APs), computers, NVRs, and routers.
Illustration of the YuanLey PoE switch connecting various PoE and non-PoE devices.
One-Key VLAN
When VLAN mode is enabled, all PoE ports (1-4) are isolated from each other but can communicate with the uplink port. This feature enhances network security by segmenting traffic.
Diagram demonstrating the one-key VLAN function, isolating PoE ports while allowing communication with the uplink.
내구성 있는 금속 Casing & Fanless Design
이 스위치는 내구성이 뛰어난 금속 부품을 특징으로 합니다.asing and a fanless design, ensuring silent operation and efficient heat dissipation for long-term reliability.
Close-up of the YuanLey PoE switch's metal casing and cooling vents.
내장형 전원 공급 장치
The switch has a built-in power supply (AC/IN 100-240V 50-60Hz), eliminating the need for an external power adapter.
뒤쪽 view of the YuanLey PoE switch, showing the integrated AC power input.
4KV 번개 보호
Equipped with 4KV lightning protection to safeguard the device and connected equipment from electrical surges.
Graphic illustrating the 4KV lightning protection feature of the switch.
설치 지침
Step 1: Unpack the Switch
Carefully remove the PoE switch and all accessories from the packaging. Inspect for any damage.
2단계: 전원 연결
Connect the provided AC power cable to the power input on the rear of the switch and then to a standard electrical outlet. The power LED indicator should illuminate.
3단계: 네트워크 장치 연결
Connect your PoE-powered devices (e.g., IP cameras, wireless access points, IP phones) to any of the 4 PoE+ ports (ports 1-4) using standard Ethernet cables.
Connect your non-PoE devices (e.g., computer, NVR, router) to the uplink port (port 5) or any other available PoE+ port if not powering a PoE device.
Diagram showing how to connect various devices to the YuanLey PoE switch for plug-and-play operation.
Step 4: Optional: Enable VLAN Mode
If network segmentation is desired, locate the VLAN switch on the device and toggle it to the "VLAN" position. This will isolate traffic between PoE ports 1-4, enhancing security.
Close-up of the VLAN switch on the YuanLey PoE switch.
Step 5: Optional: Mounting
Use the included mounting brackets and screws to secure the switch to a wall, desk, or rack unit if desired. The switch also has pre-drilled holes on the bottom for direct wall mounting.
Illustration of the YuanLey PoE switch with mounting brackets and showing it installed in a rack.
작동 지침
전원 켜기
Once connected to power, the switch will automatically power on. The Power LED will indicate its operational status.
Link/Act Indicators
Each port has LED indicators. A green light indicates a successful network link and activity. A yellow light indicates PoE power is being supplied.
데이터 전송
The switch operates automatically to facilitate data transfer between connected devices at Gigabit speeds.
The YuanLey 5 Port Gigabit PoE Switch in an office setting, demonstrating its compact design.
비디오 쇼asing the 5-Port Gigabit PoE Switch with 4-Port PoE in operation.
유지
청소
부드럽고 마른 천으로 스위치 외부를 정기적으로 청소하세요. 액체 또는 에어로졸 세척제는 사용하지 마세요.
통풍
Ensure that the cooling vents on the sides of the switch are not obstructed to allow for proper heat dissipation.
환경 조건
Operate the switch within the specified temperature range (0°C to 55°C) and humidity levels to ensure optimal performance and longevity.
Diagram illustrating the operating temperature range of the YuanLey PoE switch.
문제 해결
전원이 없습니다
Check if the power cable is securely connected to both the switch and the electrical outlet. Verify the outlet is functional.
No Link/Activity
Ensure Ethernet cables are properly connected to both the switch port and the device. Try a different cable or port. Verify the connected device is powered on and functioning correctly.
PoE 장치가 켜지지 않음
Confirm the device is PoE-compatible (IEEE 802.3af/at). Check the PoE LED indicator for the port; if it's not lit, the device might not be drawing power or there might be an issue with the cable. Ensure the total power consumption of all connected PoE devices does not exceed the switch's 78W budget.
Graphic depicting power usage levels on the PoE switch, indicating potential overload if too many devices are connected.
느린 네트워크 속도
Ensure all connected devices and cables support Gigabit Ethernet for optimal performance. Check for network congestion or faulty cables.
VLAN Isolation Issues
If devices on PoE ports 1-4 cannot communicate with each other, verify the VLAN switch is in the "VLAN" position. If they cannot communicate with the uplink, ensure the uplink port is correctly connected.
기술 사양
| 특징 | 사양 |
|---|---|
| 모델 | YS2041G-P |
| 포트 수 | 5 (4 PoE+, 1 Uplink) |
| 데이터 전송 속도 | 초당 1000메가비트(기가비트) |
| PoE 표준 | IEEE 802.3af / at |
| 최대 PoE 전력 | 78와트(총) |
| Per PoE Port Power | 최대 30와트 |
| 입력 Voltage | AC 100-240V, 50-60Hz |
| 케이스 소재 | 금속 |
| 팬리스 | 예 |
| 치수 | 7.87 x 4.65 x 1.57 인치 |
| 품목 무게 | 1.96파운드(0.89킬로그램) |
| 작동 온도 | 0°C ~ 55°C |
| 번개 보호 | 4KV |
보증 및 지원
YuanLey provides a 100% Satisfaction Guarantee. For technical support or warranty inquiries, please refer to the contact information provided in the included user manual or visit the official YuanLey web대지.
비디오 다시view of the 5 Port Gigabit PoE Switch, provided by YuanLey.