1. 서론
This instruction manual provides essential information for the proper installation, operation, and maintenance of your MAX MXSA001 315MHz Tire Pressure Monitoring System (TPMS) sensors. These sensors are designed as direct replacements for various Toyota models, ensuring accurate tire pressure monitoring for enhanced safety and vehicle performance. Please read this manual thoroughly before installation and retain it for future reference.
2. 안전 정보
- 전문 설치 권장: Installation of TPMS sensors requires specialized tools and knowledge. It is highly recommended that these sensors be installed by a qualified technician.
- Correct Torque: Ensure valve stem nuts are tightened to the specified torque (4 Nm or 35 in-lbs) to prevent air leaks and sensor damage.
- 타이어 장착: Exercise caution during tire mounting and demounting to avoid damaging the sensor.
- 호환성: Verify that the sensors are compatible with your vehicle's make, model, and year before installation. Refer to the replacement OEM part numbers provided.
- 배터리 수명: TPMS sensors contain non-replaceable batteries. The typical lifespan is 5-7 years, depending on usage.
3. 패키지 내용
각 패키지에는 다음이 포함됩니다.
- 4 x MAX MXSA001 315MHz TPMS Sensors
- 4 x Silver Aluminum Valve Stems (pre-attached to sensors)
그림 3.1: 이상view of four MAX MXSA001 TPMS sensors.
4. 설정 및 설치
Proper installation is crucial for the correct functioning of the TPMS. It is strongly recommended that installation be performed by a certified automotive technician.
4.1 설치 전 확인
- Confirm that the MXSA001 sensors are the correct replacement for your vehicle's OEM part numbers (e.g., 4260733021, 4260706011, 4260733011, 426070C020, 426070C010, 42607AD020, 4260704010).
- Inspect each sensor for any visible damage before installation.
4.2 센서 장착
- 바퀴에서 타이어를 제거합니다.
- Carefully remove the old TPMS sensor and valve stem.
- Insert the new MAX MXSA001 sensor's valve stem through the valve hole from the inside of the rim.
- Secure the valve stem nut from the outside, tightening it to 4Nm(35in-lbs). 너무 조이지 마십시오.
- Ensure the sensor body is properly seated and does not interfere with the tire bead during mounting.
- Mount the tire back onto the wheel, taking care not to damage the sensor.
- 타이어에 제조사가 권장하는 공기압을 주입하십시오.
Figure 4.2.1: Close-up of a single MXSA001 sensor.
그림 4.2.2: 측면 view of the sensor and valve stem.
4.3 TPMS Relearn Procedure
After installing new TPMS sensors, your vehicle's TPMS control module must be reprogrammed or
관련 문서 - MXSA001
 |
MAX Sensor TPMS 설치 가이드 및 보증 정보(GEN 5) MAX Sensor TPMS 센서(모델 MX005A GEN 5, MX005R GEN 5) 설치에 대한 자세한 지침(프로그래밍, 장착, 공기압 측정, 보증 세부 정보 포함)입니다. FCC 규정을 준수합니다. |
 |
MAX SENSOR MX-51 TPMS Diagnostic Tool User Manual and Overview Comprehensive guide to the MAX SENSOR MX-51, a TPMS diagnostic tool for testing, programming, and relearning tire pressure monitoring systems. Includes setup, operation, and troubleshooting. |
 |
MAX Sensor MXBLE02 TPMS Sensor Installation and Warranty Guide Comprehensive guide for installing the MAX Sensor MXBLE02 TPMS sensor, including important safety precautions, warranty information, and FCC compliance details. |
 |
MAX Sensor TPMS Installation and Warranty Guide This guide provides instructions for installing MAX Sensor TPMS units (models MX005A, MX005R GEN 5A), covering component identification, step-by-step installation, warranty details, and FCC compliance information. |
 |
자동 분사기 사용 설명서 - YZHIDIANF 기술 지원 및 보증 정보 YZHIDIANF 자동 인젝터의 공식 사용자 설명서로, 기술 지원 서비스, 보증 정보 및 연락처 정보를 제공합니다. 2년 보증, 무상 교체 및 복지 혜택도 포함되어 있습니다. |
 |
TST 507 Series Wireless TPMS Installation Manual Installation guide for the TST 507 Series Wireless Tire Pressure and Temperature Monitoring System (TPMS). Covers setup, sensor programming, display configuration, alerts, troubleshooting, and specifications for vehicles and trailers. |