1. 서론
This manual provides detailed instructions for the proper installation and maintenance of the DENALI Horn Mount, Model HMT.07.10800. This mount is specifically designed for BMW F850GS and F750GS motorcycles manufactured between 2019 and 2022. Please read all instructions carefully before beginning the installation process to ensure correct fitment and safe operation.
Note: This mount is not compatible with the BMW F850GS Adventure model.
2. 안전 정보
- Always ensure the motorcycle is turned off and the ignition key is removed before starting any installation.
- Disconnect the motorcycle's battery to prevent electrical shorts or damage during installation.
- 장갑, 보안경 등 적절한 개인 보호 장비를 착용하세요.
- If you are unsure about any step of the installation, consult a qualified motorcycle technician.
- Ensure all fasteners are tightened to the manufacturer's recommended torque specifications. Overtightening or undertightening can lead to component failure.
3. 패키지 내용
설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.
- DENALI SoundBomb Compact Horn Mounting Bracket
- Associated mounting hardware (bolts, washers, nuts)
Image: The DENALI horn mount bracket, a black L-shaped metal component with a mounting hole.
4. 필요한 도구
일반적으로 설치에는 다음과 같은 도구가 필요합니다.
- 미터법 육각 렌치 세트
- 미터법 렌치 세트
- 토크 렌치 (패스너를 제대로 조이는 데 권장됨)
- Blue Threadlocker (optional, for added security on fasteners)
5. 설정 및 설치
Follow these steps to install the DENALI Horn Mount on your BMW F850GS or F750GS motorcycle:
- 오토바이 준비: Park the motorcycle on a level surface using its center stand or a suitable paddock stand. Ensure the engine is cool. Turn off the ignition and remove the key. Disconnect the negative terminal of the motorcycle battery.
- 장착 지점을 찾으십시오: The horn mount is designed to attach to an existing point on the left side of the engine, typically near the exhaust headers. Refer to the images for the exact location.
- 브래킷을 부착하십시오: Secure the DENALI horn mount bracket to the designated mounting point on the motorcycle using the provided hardware. Ensure the bracket is oriented correctly as shown in the product images. Hand-tighten fasteners initially.
- Mount the Horn: Attach your DENALI SoundBomb Compact Horn (sold separately) to the newly installed mounting bracket using the horn's own mounting hardware. Ensure the horn is positioned to avoid interference with other motorcycle components and to allow for optimal sound projection.
- 최종 조임: Once the bracket and horn are correctly positioned, tighten all fasteners securely. Refer to your motorcycle's service manual or the horn's instructions for specific torque values if available. Apply blue threadlocker to critical fasteners for added security.
- 배터리를 다시 연결하고 테스트하세요. Reconnect the negative terminal of the motorcycle battery. Turn on the ignition and test the horn's functionality. Ensure there are no loose connections or obstructions.
영상: View of the motorcycle engine area, indicating the general location where the horn mount will be installed.
Image: The DENALI horn mount bracket securely attached to the motorcycle engine, ready for horn installation.
Image: A DENALI SoundBomb horn mounted onto the DENALI bracket on the motorcycle.
6. 운영
This product is a mounting bracket. Its operation is passive, providing a secure location for an aftermarket horn. Ensure the horn itself is correctly wired and functioning according to its own manufacturer's instructions.
7. 유지관리
- Periodically inspect the horn mount and its fasteners for any signs of loosening, corrosion, or damage.
- Tighten any loose fasteners to prevent vibration-induced wear or detachment.
- Clean the bracket with a mild soap and water solution, avoiding harsh chemicals that could damage the finish.
8. 문제 해결
If the horn does not function after installation:
- 배선 확인: Ensure all electrical connections to the horn are secure and correctly wired according to the horn's instructions.
- 퓨즈 확인: Verify that the horn's fuse (if applicable) is intact and not blown.
- Horn Functionality: Test the horn directly by connecting it to a 12V power source to confirm it is operational.
- 마운트 시큐리티: Ensure the horn mount itself is not interfering with any electrical components or causing a short circuit.
9. 사양
| 기인하다 | 세부 사항 |
|---|---|
| 상표 | 데날리 |
| 모델 | HMT.07.10800 |
| 품목 무게 | 1 파운드 |
| 패키지 크기 | 7 x 5 x 2 인치 |
| 제조업체 부품 번호 | HMT.07.10800 |
| 호환성 | BMW F850GS (2019-2022), BMW F750GS (2019-2022) |
| 메모 | Not compatible with BMW F850GS Adventure |
10. 보증 및 지원
For warranty information or technical support regarding your DENALI Horn Mount, please refer to the official DENALI web사이트를 방문하거나 고객 서비스에 직접 문의하세요. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
