매뉴얼+

ROBOTIME TSP-D-part

로보타임 아파토사우루스 나무 3D 퍼즐 조립 설명서

Model: TSP-D-part

1. 서론

Welcome to the ROBOTIME Apatosaurus Wooden 3D Puzzle. This instruction manual provides detailed guidance for assembling, operating, and maintaining your voice-controlled dinosaur model. Designed for engaging and educational assembly, this kit allows you to construct a functional Apatosaurus that can walk, roar, and respond to sound.

원활하고 즐거운 조립 경험을 위해 조립을 시작하기 전에 모든 지침을 주의 깊게 읽어보세요.

2. 패키지 내용

Before starting, verify that all components listed below are present in your package.

  • Pre-cut Plywood Sheets (containing 71 pieces)
  • 모터 유닛
  • 센서 유닛
  • Electronic Components (wires, battery compartment, speaker)
  • Detailed Assembly Instructions Booklet
  • Small Accessories (e.g., screws, plastic gears, springs)
ROBOTIME Apatosaurus puzzle components laid out with instruction manual

이미지 1: 위에view of the ROBOTIME Apatosaurus puzzle components, including pre-cut wooden sheets, electronic parts, and the assembly instruction booklet.

Close-up of ROBOTIME Apatosaurus wooden puzzle sheets and electronic parts

이미지 2: 더 가까이 view of the pre-cut plywood sheets with numbered parts, alongside various electronic components such as the speaker and plastic gears.

3. 조립 설명서

The ROBOTIME Apatosaurus is a DIY assembly kit designed to engage both hands and mind. Follow the numbered steps in the included instruction booklet carefully.

  1. 준비: Unpack all components and lay them out on a clean, flat surface. Identify the plywood sheets and the separate electronic parts.
  2. 부품 식별: Each wooden piece is numbered. Refer to the instruction booklet to identify the correct parts for each step. Gently push out the pieces from the plywood sheets. Avoid forcing them to prevent damage.
  3. 초기 조립: Begin by assembling the core body structure using the interlocking wooden pieces as guided by the manual. Pay close attention to the orientation of each piece.
  4. Electronic Integration: As instructed, integrate the motor, sensor, and other electronic components into the wooden structure. Ensure all wires are connected correctly and securely. Incorrect wiring may prevent the model from functioning.
  5. Leg and Tail Assembly: Attach the legs and tail sections, ensuring that the joints allow for proper movement. The mechanical parts should move freely without excessive friction.
  6. Head and Neck Assembly: Assemble the head and neck, connecting them to the main body.
  7. 최종 점검: Once all parts are assembled, double-check all connections and ensure no pieces are loose. Insert the required batteries (not included) into the designated compartment.

팁: Some parts may require gentle sanding or a small amount of glue for a more secure fit, though typically not necessary if assembled correctly. Always refer to the specific instructions provided in your kit.

Fully assembled ROBOTIME Apatosaurus wooden 3D puzzle

이미지 3: The completed ROBOTIME Apatosaurus wooden 3D puzzle, showcasing its intricate design and structural integrity.

4. 사용 설명서

Your ROBOTIME Apatosaurus model is designed with voice control functionality.

  1. 전원 켜기: Ensure batteries are correctly installed. Locate the power switch (if present, usually near the battery compartment) and turn the model ON.
  2. 음성 활성화: The Apatosaurus responds to sound. A clap of hands or a clear, distinct sound will activate its movements and sounds.
  3. 기능: Upon activation, the dinosaur will walk, roar, and may exhibit biting motions, simulating a real Apatosaurus.
  4. 최적의 환경: For best performance, operate the model in a relatively quiet environment to ensure clear detection of voice commands.

5. 유지관리

To ensure the longevity and proper functioning of your ROBOTIME Apatosaurus model, follow these maintenance guidelines:

  • 청소: Wipe the wooden surfaces with a dry, soft cloth. Avoid using water or chemical cleaners, as they can damage the wood and electronic components.
  • 저장: Store the model in a dry place away from direct sunlight and extreme temperatures to prevent warping or damage to the wood and electronics.
  • 배터리 관리 : Remove batteries if the model will not be used for an extended period to prevent leakage and damage to the electronic circuit.
  • 손질: Handle the assembled model with care, especially delicate parts like the neck and tail, to avoid breakage.

6. 문제 해결

If your ROBOTIME Apatosaurus model is not functioning as expected, consider the following:

문제가능한 원인해결책
Model does not move or roar.
  • 배터리가 소진되었거나 올바르게 설치되지 않았습니다.
  • 전원 스위치가 꺼져 있습니다.
  • Electronic connections are loose.
  • Sensor is not detecting sound.
  • 배터리를 교체하거나 극성이 올바른지 확인하세요.
  • 전원 스위치를 켜십시오.
  • Check all wire connections as per the assembly manual.
  • Ensure a clear, distinct sound is made near the sensor.
Movement is stiff or jerky.
  • Wooden parts are rubbing.
  • Assembly error in joints.
  • 움직이는 부품에 장애물이 있는지 점검하십시오.
  • Review assembly steps for correct placement of joint pieces.
Roaring sound is distorted or absent.
  • Speaker connection is loose.
  • 스피커가 방해를 받습니다.
  • Check the speaker wire connection.
  • Ensure nothing is blocking the speaker output.

7. 사양

  • 모델: TSP-D-part (Apatosaurus)
  • 상표: 로보타임
  • 재료: Engineered Wood (Plywood), Motor, Sensor
  • 조각 수: 71
  • 필요한 조립: 예
  • 특별 기능: Durable, Sound, Voice Control, Walking Motion
  • 추천 연령: 3세 이상 (제조업체 권장 연령: 36개월 이상)
  • 패키지 크기: Approximately 320 x 235 x 55 mm (31 x 23 x 5.1 cm)
  • ASIN: B081CQKMD1

8. 보증 및 지원

ROBOTIME products are manufactured with quality in mind. For any questions regarding assembly, missing parts, or operational issues not covered in this manual, please contact ROBOTIME customer support directly.

Please retain your proof of purchase for any warranty claims. Specific warranty terms and conditions may vary by region.

관련 문서 - TSP-D-part

사전view 올리비아의 주방 조립 설명서 - ROBOTIME WCF09
ROBOTIME 올리비아의 주방 놀이 세트(모델 WCF09)의 자세한 조립 설명서입니다. 부품 목록, 단계별 조립 방법, 그리고 안전 주의사항이 포함되어 있습니다.
사전view ROKR AMK52 시크릿 가든 DIY 기계식 뮤직 박스 조립 설명서
Robotime 사의 ROKR AMK52 Secret Garden DIY 기계식 뮤직 박스 조립 설명서입니다. 이 가이드는 부품 목록, 단계별 조립 설명, 그리고 성공적인 조립을 위한 유용한 팁을 포함하여 조립 과정을 자세히 안내합니다.
사전view 캐시의 꽃집 DG104: 미니어처 DIY 조립 가이드
Robotime의 Cathy's Flower House DG104 미니어처 DIY 공예 키트에 대한 종합적인 조립 설명서입니다. 이 가이드는 매력적인 꽃집을 직접 만드는 데 도움이 되는 자세한 단계, 팁, 그리고 부품 목록을 제공합니다.
사전view Robotime LG504 제품 안전 경고 및 제조업체 정보
로보타임 LG504에 대한 필수 안전 정보에는 연령 제한, 작은 부품에 대한 경고, 유럽연합 집행위원회 대표(ROBOTIME EUROPE LTD) 및 제조업체(Robotime C&C (iangsu) Co., Ltd)에 대한 세부 정보가 포함됩니다.
사전view Robotime EC 적합성 선언 - 미니어처 하우스 키트
Mind-Find Bookstore, Holiday Party Time 등의 모델을 포함한 Robotime Technology(Suzhou) Co., Ltd.의 DIY 미니어처 하우스 키트 제품군은 조화된 표준을 준수한다는 공식 EC 적합성 선언을 받았습니다.
사전view Robotime EC 적합성 선언 - 제품 목록 및 규정 준수
로보타임 테크놀로지(쑤저우) 유한회사의 공식 EC 적합성 선언서에는 적합성을 충족하는 목재 모델 키트, 제품 세부 정보, 적용 가능한 조화 표준 및 테스트 보고서가 나열되어 있습니다.