CJ Tech (FM72988) 26인치 - 55인치 풀모션 TV 벽걸이 마운트 사용 설명서

1. 서론

Thank you for choosing the CJ Tech (FM72988) Full Motion TV Wall Mount. This product is designed to securely mount flat panel televisions ranging from 26 to 55 inches, supporting a maximum weight of 66 lbs (30 kg). Its full motion capabilities allow for optimal viewing angles with 160-degree swivel and an 8 to -5 degree tilt range. This manual provides comprehensive instructions for safe installation, operation, and maintenance of your TV wall mount.

2. 안전 정보

Please read all instructions carefully before installation and use. Failure to do so may result in personal injury or property damage. Keep this manual for future reference.

• 중량 용량: 최대 하중 66lbs(30kg)를 초과하지 마십시오. 이 거치대는 26인치에서 55인치 사이의 TV용으로 설계되었습니다.
• VESA 호환성: Ensure your TV's VESA pattern is compatible with the mount (up to 400 x 400 mm).
• 벽 유형: 이 거치대는 콘크리트 벽, 벽돌 벽 또는 목재 스터드 벽에 설치하도록 설계되었습니다. 석고보드 벽에만 설치하지 마십시오.
• 전문적인 설치: 설치 과정에 대해 확신이 없다면 자격을 갖춘 전문가에게 문의하세요.
• 구성 요소 확인: Before installation, verify that all components listed in the 'Package Contents' section are present and undamaged. Do not use damaged parts.
• 어린이들: 설치 장소에 어린이가 접근하지 못하도록 하십시오. 작은 부품은 질식 위험이 있습니다.

3. 패키지 내용

Carefully unpack the box and ensure all items are present and in good condition. If any parts are missing or damaged, do not proceed with installation and contact customer support.

• Full Motion TV Wall Mount Assembly
• 설치용 하드웨어 키트(다양한 나사, 앵커, 와셔)
• Quick Install Template
• 사용 설명서 (본 문서)

4. 설정 및 설치

TV 벽걸이 거치대를 안전하고 올바르게 설치하려면 다음 단계를 주의 깊게 따르십시오.

4.1 필요한 도구(포함되지 않음)

• 송곳
• 스터드 파인더(목재 스터드 설치용)
• 수준
• Phillips 헤드 스크루 드라이버
• Socket Wrench (appropriate size for lag bolts)
• 연필
• 줄자

4.2 벽면 플레이트 설치

1. TV를 설치할 원하는 높이와 위치를 정하세요. 나무 벽에 설치하는 경우, 스터드 파인더를 사용하여 나무 스터드의 중심을 찾으세요.
2. Place the quick install template against the wall at the desired height and use a level to ensure it is perfectly horizontal. Mark the drilling points with a pencil.
3. Drill pilot holes at the marked locations. The size of the drill bit will depend on your wall type and the provided lag bolts/anchors. Refer to the specific instructions for your wall type in the included hardware kit.
4. Attach the wall plate of the mount to the wall using the provided lag bolts and washers. Tighten securely, but do not overtighten.

4.3 TV에 브래킷 부착하기

1. TV에 흠집이 생기지 않도록 부드럽고 깨끗한 표면에 TV 화면이 아래로 향하게 조심스럽게 놓으십시오.
2. TV 뒷면에 있는 VESA 장착 구멍을 확인하세요.
3. Select the appropriate screws and spacers from the hardware kit that fit your TV's mounting holes.
4. Attach the TV brackets to the back of your TV, ensuring they are securely fastened and aligned.

4.4 TV를 벽면 플레이트에 장착하기

1. 다른 사람의 도움을 받아 부착된 브래킷을 이용해 TV를 조심스럽게 들어 올리십시오.
2. TV 브래킷을 벽면 고정판에 걸어주세요. TV가 마운트에 단단히 고정되었는지 확인하세요.
3. Engage any safety locking mechanisms on the mount to prevent the TV from accidentally dislodging.

5. 마운트 작동

Once installed, your full motion TV wall mount offers flexible view옵션.

• 회전 조정: Gently push or pull the TV to swivel it horizontally up to 160 degrees (80 degrees left or right from center). This allows you to view the screen from various positions in the room.
• 기울기 조정: The mount allows for a tilt range of 8 degrees upward to -5 degrees downward. To adjust the tilt, loosen the tilt adjustment knobs/screws on the mount, set the TV to the desired angle, and then re-tighten the knobs/screws to secure the position.
• 확장/수축: The articulating arm allows you to extend the TV away from the wall or push it back closer to the wall. Move the TV gently to achieve the desired distance.

6. 유지관리

정기적인 유지 관리는 TV 벽걸이 거치대의 수명과 안전한 작동을 보장하는 데 도움이 됩니다.

• 정기 검사: Every few months, visually inspect the mount and all connection points (wall bolts, TV screws) to ensure they are still secure. Re-tighten any loose fasteners.
• 청소: 부드럽고 마른 천으로 거치대를 닦으십시오. 연마성 세척제나 용제를 사용하지 마십시오. 마감재가 손상될 수 있습니다.
• 매끄럽게 하기: The articulating joints are designed for smooth movement. If you notice any stiffness over time, a small amount of silicone-based lubricant can be applied to the moving parts.

7. 문제 해결

If you encounter any issues with your TV wall mount, refer to the following common problems and solutions.

• TV가 수평이 아닙니다:
  해결책: Check the wall plate installation with a level. If the wall plate is level, adjust the fine-tuning leveling screws on the TV brackets (if available) or re-adjust the TV on the mount.
• 벽에 고정하는 부분이 헐렁한 느낌이 듭니다.
  해결책: Immediately remove the TV from the mount. Re-tighten all lag bolts securing the wall plate to the wall. Ensure you are drilling into a solid stud or using appropriate anchors for concrete/brick. If the issue persists, consult a professional installer.
• Difficulty adjusting swivel/tilt:
  해결책: Ensure no cables are snagged or obstructing movement. For tilt, loosen the tilt adjustment knobs/screws before attempting to change the angle, then re-tighten. If joints are stiff, apply a small amount of silicone lubricant.
• TV가 마운트에 맞지 않습니다:
  해결책: Verify your TV's VESA pattern matches the mount's compatibility (up to 400x400mm) and that your TV's weight and size are within the specified limits (26-55 inches, max 66 lbs/30 kg).

8. 사양

9. 보증 및 지원

CJ Tech products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your product or visit the official CJ Tech website. If you require technical assistance or have questions regarding your product, please contact CJ Tech customer support.