1. 서론
This manual provides essential information for the safe and effective installation, operation, and maintenance of your Genmitsu 300W Air-Cooled Brush DC Spindle Motor and its accompanying adjustable switching power supply. Please read these instructions thoroughly before use to ensure proper functionality and to prevent damage.
2. 제품 오버view
The Genmitsu 300W Spindle Motor kit is designed for CNC machining applications, offering an air-cooled brush DC motor with an adjustable power supply for variable speed control.
2.1 포함된 구성 요소
- 300W Brush DC Spindle Motor with ER11 Collet
- 0-48V Output Adjustable Switching Power Supply
- 52mm Spindle Clamp
- 장착 하드웨어(나사)
- Wiring for connections
- Speed Control Potentiometer
그림 1: 이상view of the Genmitsu 300W Spindle Motor Kit components, including the spindle motor, power supply, clamp, and wiring.
2.2 주요 특징
- 공랭식 디자인: 장시간 작동이 가능합니다.
- 조정 가능한 출력 볼륨tage: The power supply offers a 0-48V output, enabling variable spindle speeds.
- ER11 Collet: Provides secure tool holding.
- 견고한 구조: Chrome-plated brush DC motor for durability.
3. 사양
| 사양 | 값 |
|---|---|
| 상표 | 겐미츠 |
| 모델 번호 | 101-60-SPM300 |
| 스핀들 파워 | 300와트 |
| 스핀들 유형 | Brush DC Motor |
| 권tag및 범위 | 12-48V DC |
| 속도 범위 | 3000-12000 r/min (12V-3000r/min, 24V-6000r/min, 36V-9000r/min, 48V-12000r/min) |
| Radial Run Out | 0.01~0.04mm |
| 콜렛 유형 | ER11 |
| 스핀들 직경 | 52mm |
| 전원 공급 장치 출력 | 0-48V DC, 10A (output current determined by load) |
| 재료 | 알류미늄 |
| 품목 무게 | 2.05킬로그램(4.51파운드) |
4. 설정 지침
4.1 Mounting the Spindle Motor
- Ensure your CNC machine is powered off and disconnected from the main power source.
- Secure the 52mm spindle clamp to the Z-axis of your CNC machine using appropriate hardware. Note: For 3018 series CNC machines, an additional 52mm diameter motor mount may be required. The Genmitsu Aluminum Z Axis Spindle Motor Mount (B0BXRX85WM) is a compatible option.
- Insert the 300W spindle motor into the 52mm clamp 그리고 cl을 조입니다amp screws to hold it firmly in place.
Figure 2: The 300W spindle motor installed within a 52mm clamp on a CNC machine's Z-axis.
4.2 Wiring the Power Supply and Spindle
- Connect the AC input of the power supply to a suitable power source (100-120V AC or 200-240V AC, depending on your region and power supply model). Ensure proper grounding.
- Connect the red wire from the spindle motor to the '+V' terminal on the power supply's DC output.
- Connect the black wire from the spindle motor to the '-V' terminal on the power supply's DC output.
- Connect the speed control potentiometer to the designated terminals on the power supply for variable voltage output control. Refer to the power supply's specific wiring diagram for precise connections.
Figure 3: The 0-48V adjustable switching power supply unit, showing input and output terminals.
Figure 4: The power supply connected to the speed control potentiometer for adjusting output voltage.
5. 사용 설명서
5.1 전원 켜기 및 속도 조정
- After ensuring all connections are secure and correct, connect the power supply to the main power source.
- Use the speed control potentiometer to adjust the output voltage. Turning the knob will vary the DC voltage supplied to the spindle motor, thereby changing its rotational speed.
- Monitor the spindle speed. The approximate speeds are: 12V for 3000 r/min, 24V for 6000 r/min, 36V for 9000 r/min, and 48V for 12000 r/min.
그림 5: 클로즈업 view of the 300W air-cooled brush DC spindle motor with ER11 collet.
5.2 Tool Installation (ER11 Collet)
- Ensure the spindle motor is completely stopped and powered off before changing tools.
- Unscrew the ER11 collet nut from the spindle shaft.
- Insert the desired ER11 collet into the collet nut.
- Insert the cutting tool (end mill, engraving bit, etc.) into the collet. Ensure the tool shank matches the collet size.
- Screw the collet nut with the tool back onto the spindle shaft and tighten it securely using a wrench. Do not overtighten.
6. 유지관리
- 정기 청소: Keep the spindle motor and power supply free from dust and debris. Use compressed air to clean the cooling fins of the spindle and the vents of the power supply.
- 연결 확인: Periodically inspect all electrical connections for tightness and signs of wear or damage.
- Spindle Clamp: Ensure the spindle clamp remains securely tightened to prevent movement during operation.
- 브러시 교체: As a brush DC motor, the carbon brushes will wear over time. Refer to Genmitsu support for guidance on brush inspection and replacement if performance degrades.
7. 문제 해결
- Spindle Not Spinning:
- Check all power connections to the power supply and from the power supply to the spindle motor.
- Ensure the power supply is receiving AC input.
- Verify the potentiometer is correctly wired and adjusted.
- Inconsistent Spindle Speed:
- 느슨한 전선 연결을 확인하세요.
- Ensure the potentiometer is functioning correctly.
- Verify the load on the spindle is not excessive, as output current is load-dependent.
- 과도한 진동/소음:
- Ensure the spindle motor is securely mounted in its clamp.
- Check if the ER11 collet and cutting tool are properly installed and balanced.
- Inspect the spindle's internal fan for any obstructions or imbalance.
- 모터 과열:
- Ensure adequate airflow around the spindle motor and power supply.
- Verify the cooling fan on the spindle is operating.
- Reduce the cutting depth or feed rate if the motor is consistently overheating during operation.
8. 보증 및 지원
For warranty information, technical support, or replacement parts, please contact Genmitsu customer service through their official website or the platform where the product was purchased. Provide your model number (101-60-SPM300) and purchase details for efficient assistance.
