Mesqool Loud Alarm Clock with Bed Shaker

소개

The Mesqool CR1008i Loud Alarm Clock is designed to provide a reliable wake-up experience for heavy sleepers and individuals with hearing impairment. It features multiple alarm modes, a large LED display with adjustable brightness, a 7-color nightlight, and convenient dual USB charging ports.

상자 안에 무엇이 들어있나요?

• 시끄러운 알람 시계
• 베드 셰이커
• 사용자 설명서
• 전원 어댑터
• 1.5 미터 케이블

설정

알람 시계 전원 켜기

1. Connect the provided Power Adapter to the DC 5V IN port on the back of the alarm clock.
2. Plug the Power Adapter into a standard electrical outlet. The display will light up.
3. For battery backup, open the battery compartment on the back and insert 2 AAA batteries (not included). This will preserve time and alarm settings during a power outage.

Figure 1: Rear panel with power input, USB ports, and battery compartment. Insert 2 AAA batteries for backup power.

Connecting the Bed Shaker

4. Plug the Bed Shaker cable into the dedicated vibrator port on the back of the alarm clock.
5. Place the bed shaker under your pillow or mattress for effective vibration. The 70.8-inch long cord provides flexibility in placement.

Figure 2: The bed shaker positioned under a pillow for silent, vibrating alarm.

작동 지침

시간 설정

• 를 누르고 계세요 시간 설정 button on the top panel. The hour digits will begin to flash.
• 사용하세요 + or - 버튼으로 시간을 조정합니다.
• 누르다 시간 설정 다시 시간을 확인하고 분 조정으로 넘어갑니다. 분 숫자가 깜빡입니다.
• 사용하세요 + or - 버튼을 사용하여 분을 조정합니다.
• 누르다 시간 설정 one more time to save the time setting.
• 12시간 형식과 24시간 형식을 전환하려면 다음을 누릅니다. 12/24시간 단추.
• To activate or deactivate Daylight Saving Time (DST), press the 일광 절약 시간제 단추.

Setting Alarms (AL1 & AL2)

The clock supports two independent alarms (AL1 and AL2).

• 를 누르고 계세요 AL1 or AL2 버튼을 누릅니다. 알람 시간 숫자가 깜빡입니다.
• 사용하세요 + or - 원하는 알람 시간을 설정하는 버튼입니다.
• 누르다 AL1 or AL2 again to confirm the hour and set the minutes. The alarm minute digits will flash.
• 사용하세요 + or - 원하는 알람 시간을 분 단위로 설정하는 버튼입니다.
• 누르다 AL1 or AL2 one more time to save the alarm setting.
• To choose the alarm mode (Buzzer, Vibrator, or Both), use the BUZZ/VIB slide switch on the side of the clock.
• To adjust the alarm volume, use the 알람 볼륨 slide switch on the side of the clock (Low, Medium, High).

그림 3: 측면 view of the alarm clock with slide switches for selecting alarm mode (Buzzer, Vibrator, or Both) and alarm volume.

스누즈 기능

• 알람이 울리면 큰 버튼을 누르세요 SNOOZE OK button on the top of the clock to activate snooze. The alarm will pause for 9 minutes.
• 알람을 완전히 끄려면 버튼을 누르세요. 알람 꺼짐 단추.

Figure 4: The prominent snooze button on top of the alarm clock for easy access.

Night Light & Dimmer

• The alarm clock features a 7-color night light. Press the SNOOZE OK button (which also functions as the light button) to cycle through the 7 colors or turn the night light off.
• The 7-inch LED display has a full slider dimmer (0%-100%). Use the 주차 slide switch on the side of the clock to adjust the display brightness to your preference.

그림 5: 알람 시계 표시asing its 7-color night light options.

듀얼 USB 충전 포트

• The alarm clock is equipped with two DC 5V/1A output USB charging ports on the back.
• Connect your smartphones, tablets, or other USB-powered devices to these ports for convenient charging.

Figure 6: Two smartphones charging simultaneously using the dual USB ports on the alarm clock.

유지

• Clean the alarm clock and bed shaker with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
• 청소하기 전에 장치의 플러그를 뽑았는지 확인하십시오.
• 장치를 물과 높은 습도에서 멀리 두십시오.

문제 해결

No Display / Power Issue

• Check if the power adapter is securely plugged into both the clock and the wall outlet.
• 벽면 콘센트가 제대로 작동하는지 확인하려면 다른 기기를 연결해 보세요.
• 배터리 백업을 사용하는 경우 배터리가 올바르게 삽입되었는지, 방전되지 않았는지 확인하십시오.

Alarm Not Sounding/Vibrating

• Verify that the alarm (AL1 or AL2) is activated and set to the correct time.
• 확인하세요 BUZZ/VIB slide switch to ensure the desired mode (Buzzer, Vibrator, or Both) is selected.
• 조정하다 알람 볼륨 slide switch to a higher setting if the buzzer is too quiet.
• Ensure the bed shaker is properly connected to its port.

Display Too Bright/Dim

• 사용하세요 주차 slide switch on the side of the clock to adjust the display brightness.

명세서