RENPHO Foot Spa Bath Massager (Model JD-618) Instruction Manual

1. 중요한 안전 정보

Please read all instructions carefully before using the RENPHO Foot Spa Bath Massager. Keep this manual for future reference.

• Use the foot massager with caution around water and electricity.
• Ensure the power supply is compatible with the product's voltage and power (120V, 60Hz, 500W).
• Do not use without water. Always add water first before turning on the unit.
• 발 스파에 서 있지 마세요. 앉아서 사용하세요.
• Avoid pulling the power cord forcefully, as this may disconnect internal wiring and prevent the machine from operating.
• 어린이와 애완동물의 손이 닿지 않는 곳에 보관하세요.
• 불편함을 느끼면 즉시 사용을 중단하세요.

2. 제품 오버view

The RENPHO Foot Spa Bath Massager is designed to provide a relaxing and therapeutic foot massage experience. It features motorized massage rollers, fast heating capabilities, powerful bubble jets, and automatic shiatsu massaging rollers to relieve discomfort and stress.

주요 특징:

• PTC Heater with Adjustable Temperature: Heats quickly and maintains a constant temperature between 95°F to 118°F (35°C to 48°C). Features overheating protection and multiple insulation for safety.
• 타이머 기능: Set the massage duration from 10 to 60 minutes.
• 3 Automatic Massage Modes: High-quality rollers target acupuncture points with continuous rolling, even time intervals, or unequal time intervals. Default massage time is 15 minutes.
• Powerful Bubble Jets: Provides invigorating bubbles for enhanced foot relaxation.
• Easy Portability & Drainage: Equipped with wheels and a handle for easy movement. Features a drain pipe for convenient water emptying without lifting.
• Removable Medicine Box: Allows for the addition of essential oils, bath salts, or other foot care products for a customized spa experience.

Figure 2.1: The RENPHO Foot Spa Bath Massager in its operational state.

Figure 2.2: Close-up of the intuitive control panel for easy operation.

그림 2.3: 내부 view showing the motorized massage rollers and bubble jet outlets.

3. 설정 지침

1. Unfold the Foot Spa: The foot spa is designed to be collapsible for easy storage. Gently pull up the sides of the unit until it fully expands into its operational shape.
2. 위치: Place the foot spa on a flat, stable surface. Ensure the power cord can reach an outlet without being stretched or creating a tripping hazard.
3. 물로 채우십시오: Fill the foot spa with water. For faster heating, you may use warm water initially. Do not exceed the "Max Water Line" indicated inside the basin.
4. 전원 연결: Plug the power cord into a compatible 120V, 60Hz electrical outlet.

Figure 3.1: Product dimensions and key components including the hidden handle and drain pipe.

4. 사용 설명서

Once the foot spa is set up and filled with water, you can begin your relaxing experience using the control panel.

1. 전원 켜기: 전원 버튼 (켜짐/꺼짐) on the control panel to turn on the unit. The display will show the current water temperature.
2. 온도 조절: 사용하세요 온도+ 그리고 온도- buttons to set your desired water temperature between 95°F and 118°F (35°C and 48°C). The PTC heater will quickly reach and maintain this temperature.
3. 마사지 모드 선택: 를 누르세요 마사지 button to cycle through the 3 automatic massage modes: continuous rolling, even time intervals, and unequal time intervals. The default massage time is 15 minutes.
4. Activate Bubble Jets & Red Light: 를 누르세요 RED LIGHT & BUBBLE button to activate the powerful bubble jets and the soothing red light function. Press again to turn off.
5. 타이머 설정 : 를 누르세요 시간제 노동자 button to set the desired duration for your foot spa session, from 10 to 60 minutes.
6. Using the Removable Medicine Box: Open the removable medicine box located inside the foot spa to add essential oils, bath salts, or other foot care products. Close securely before use.

Figure 4.1: The adjustable temperature feature ensures your water stays warm throughout your session.

Figure 4.2: The three automatic massage modes provide varied and targeted relief for your feet.

Figure 4.3: Enjoy the soothing red lights and invigorating bubbles for a complete spa experience.

Figure 4.4: The removable medicine box allows for personalized aromatherapy or bath salt treatments.

5. 유지관리 및 청소

1. 배수 물: After use, unplug the unit. Use the integrated drain pipe to empty the water. This eliminates the need to lift the heavy unit when full.
2. B를 청소하세요asin: b를 헹구세요asin with clean water. Use a soft cloth and mild soap to wipe down the interior and exterior surfaces. Avoid abrasive cleaners.
3. 완전히 말리세요: Ensure all parts are completely dry before folding and storing the unit.
4. 저장: Collapse the foot spa for compact storage. Use the hidden handle for easy transport.

Figure 5.1: The convenient drain pipe allows for easy water removal.

6. 문제 해결

• 장치가 켜지지 않습니다:
  • 전원 코드가 제대로 작동하는 콘센트에 제대로 꽂혀 있는지 확인하세요.
  • 전원 스위치가 "ON" 위치에 있는지 확인하세요.
  • Verify that the internal wires are not disconnected due to forceful pulling of the power cord.
• 물이 가열되지 않습니다:
  • Confirm that the temperature setting is activated and set to your desired level.
  • Ensure there is sufficient water in the basin, above the minimum water line.
• No bubbles or massage:
  • Check if the respective functions (Bubble/Red Light, Massage) are activated on the control panel.
  • Ensure the unit is properly powered and has water.

7. 사양

8. 보증 및 지원

RENPHO products typically come with a manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions, or visit the official RENPHO web자세한 보증 정보 및 고객 지원 연락처는 해당 사이트를 참조하십시오.

For any questions, technical assistance, or warranty claims, please contact RENPHO customer support.