Bingfu 4G LTE Cellular Antenna Instruction Manual

1. 제품 오버view

The Bingfu 4G LTE Cellular Antenna is designed to enhance cellular signal reception for various devices, including 4G LTE mobile routers, hotspots, CPE routers, cellular gateways, and trail cameras. It features a 5dBi gain, omni-directional coverage, and a waterproof design suitable for outdoor installation. The antenna comes with a 10-foot low-loss coaxial cable and an SMA male connector, along with an RP-SMA male adapter for broad compatibility.

Figure 1: Bingfu 4G LTE Cellular Antenna, showing the antenna unit, 10ft coaxial cable, mounting bracket, and screws.

2. 패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

• 1 x Bingfu 4G LTE Cellular Antenna (with integrated 10ft Low Loss KSR 195 Coaxial Cable and SMA Male Connector)
• 1 x RP-SMA Connector Adapter
• 1 x 벽 장착 브래킷
• 4 x 셀프 태핑 나사

3. 사양

Figure 2: Detail of the KSR195 Coaxial Cable, highlighting its low loss and double shield properties, solid copper inner conductor, and 4.95mm outer diameter.

Figure 3: Dimensional drawing of the antenna and mounting bracket, showing key measurements in centimeters.

Figure 4: Detailed technical drawing of the antenna, including internal component dimensions and thread specifications.

4. 설정 및 설치

The Bingfu 4G LTE Cellular Antenna is designed for easy outdoor installation, suitable for wall or tree mounting. Follow these steps for optimal performance:

4.1 위치 선택

Select a location that provides the clearest line of sight to the nearest cellular tower and is free from obstructions like large buildings or dense foliage. Mounting the antenna as high as possible is recommended for best signal reception.

4.2 브래킷 장착

1. Position the wall mount bracket at your desired installation point.
2. Mark the four screw holes on the mounting surface.
3. Use the provided self-tapping screws to securely fasten the bracket to the wall or tree. Ensure the bracket is firmly attached to prevent movement.

Figure 5: The antenna securely mounted on a tree, demonstrating its outdoor suitability and rainproof design.

Figure 6: The antenna installed on an exterior wall, showcasing its ability to withstand rainy conditions.

4.3 Attaching the Antenna to the Bracket

1. Insert the antenna's threaded base through the hole in the mounting bracket.
2. Place the red waterproof rubber ring, washer, and nut onto the threaded base from the underside of the bracket.
3. Tighten the nut securely to fix the antenna to the bracket. Ensure the waterproof ring is properly seated to maintain the rainproof seal.

Figure 7: An exploded diagram illustrating the components for fixed bracket mounting, including the antenna, bracket, waterproof ring, washer, and nut.

그림 8: 클로즈업 view of the antenna's base, highlighting the high-strength internal waterproof rubber ring and the M12 thru-hole mount screws.

4.4 장치에 연결하기

1. Locate the SMA male connector at the end of the 10-foot coaxial cable.
2. If your device requires an RP-SMA connection, attach the provided RP-SMA male adapter to the SMA male connector.
3. Connect the antenna cable (or adapter) to the corresponding antenna port on your 4G LTE mobile router, trail camera, or other compatible device. Ensure the connection is finger-tight.

5. 사용 설명서

Once the Bingfu 4G LTE Cellular Antenna is installed and connected, its operation is passive. The antenna works by receiving and transmitting cellular signals to and from your connected device. No additional configuration or power supply is required for the antenna itself.

• Ensure your connected device (e.g., router, trail camera) is powered on and configured to use an external antenna if applicable. Refer to your device's manual for specific settings.
• Monitor the signal strength indicator on your device to confirm improved reception.

호환성: This antenna is compatible with a wide range of 4G LTE devices, including:

• 4G LTE Mobile Routers, Mobile Broadband Modem Hotspots, CPE Routers, Cellular Gateways.
• Vehicle Car Truck RV Bus Van Mobile Cellular systems.
• Almost all Cellular Trail Cameras, such as SPYPOINT Link S/LINK S DARK/LINK MICRO LTE TWIN/LINK MICRO S LTE/Flex Dual-Sim/Link EVO/LINK-MICRO-LTE-V/Link Micro VZN Version/Link Micro Solar/micro wm-v/LINK-W/SPYPOINT CELL LINK 4G LTE Cellular Trail Camera, Game Camera, Hunting Camera, Outdoor Security Camera, Cellular Surveillance Camera.
• Vehicle 4G LTE Trackers, Real Time Monitors, Mobile Vehicle Car DVR MDVR Video Recorders.
• Industrial 4G LTE Routers, Cellular IoT Gateways, 4G LTE M2M RTU DTU Terminals, Cellular Embedded Modules, Remote Metering and SMS Alarm, Remote SCADA DAQ Modules, Remote Relay Gate Opener Switches, Vending Machines, Digital Signage, Delivery Lockers, Cellular Temperature Humidity Sensor Monitoring Systems, GSM Alarm Systems, Wireless Security Sensor Motion Detector Alerts.

6. 유지관리

The Bingfu 4G LTE Cellular Antenna requires minimal maintenance due to its durable and waterproof design. To ensure long-term performance:

• Periodically inspect the antenna and its mounting bracket for any signs of physical damage, corrosion, or loose connections.
• Ensure the cable connections remain tight and free from moisture.
• Gently clean the antenna's exterior with a soft, damp cloth if it accumulates dirt or debris. Avoid using harsh chemicals or abrasive materials.
• In areas prone to extreme weather, consider checking the mounting stability after severe storms.

7. 문제 해결

If you experience issues with your Bingfu 4G LTE Cellular Antenna, consider the following troubleshooting steps:

7.1 Poor Signal Reception

• Check Antenna Placement: Ensure the antenna is mounted in an optimal location, as high as possible and with minimal obstructions between it and the cellular tower. Even small changes in position can significantly affect signal strength.
• 연결 확인: Confirm that all cable connections are secure and properly tightened. A loose connection can degrade signal quality.
• 케이블 검사: Check the 10-foot coaxial cable for any kinks, cuts, or damage. Damaged cables can lead to signal loss.
• 기기 설정: Ensure your connected device is correctly configured to use an external antenna. Some devices may require specific settings adjustments.
• 네트워크 범위: Confirm that there is adequate cellular network coverage in your area. This antenna enhances existing signals but cannot create a signal where none exists.

7.2 No Signal at All

• 어댑터 확인: If using the RP-SMA adapter, ensure it is correctly attached and compatible with your device's port.
• 장치 기능: Test your connected device with its original antenna (if applicable) or in a known good signal area to rule out issues with the device itself.
• Cable Continuity: If possible, test the continuity of the coaxial cable to ensure it is not broken internally.

8. 보증 및 지원

Bingfu products are designed for reliability and performance. For specific warranty information and technical support, please refer to the official Bingfu web사이트를 방문하거나 고객 서비스에 직접 문의하세요.

• 제조업체: Bingfu
• 브랜드 스토어: Visit the Bingfu Store on Amazon
• 연락하다: For technical assistance or warranty claims, please reach out to Bingfu customer support through their official channels.