1. 제품 오버view
The Total TWP47506 750W Automatic Jet Water Pump is designed for efficient clean water collection and distribution. It is suitable for drawing water from wells, boreholes, open tanks, and other water supply sources. Primary applications include watering vegetable gardens, personal plots, and ensuring water circulation in fountains and various water features. Its design prioritizes ease of maintenance and portability, featuring an external tank location. The pump incorporates a brushless induction motor for long-lasting, maintenance-free operation. The robust cast iron pump casing can be rotated 90 degrees for flexible installation. This pump is capable of integration into automated water supply systems.
그림 1: Total TWP47506 750W Automatic Jet Water Pump. This image shows the complete pump unit with its motor and casing.
2. 안전 지침
Read all safety warnings and instructions carefully before operating this product. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.
일반 안전
- 항상 보안경, 장갑 등 적절한 개인 보호 장비(PPE)를 착용하십시오.
- 넘어지는 것을 방지하기 위해 펌프가 안정적이고 수평인 표면에 놓여 있는지 확인하세요.
- 어린이와 허가받지 않은 사람이 수술 구역에 접근하지 못하도록 하세요.
- 인화성 액체, 가스 또는 분진과 같은 폭발성 환경에서는 펌프를 작동하지 마십시오.
- Never use the pump to transfer flammable, corrosive, or explosive liquids.
- Disconnect the power supply before performing any maintenance, cleaning, or when the pump is not in use.
전기 안전
- 전원 공급 장치 볼륨을 확인하십시오.tage matches the specifications on the pump's rating label (220-240V, 50Hz).
- Use a properly grounded outlet. Do not modify the plug.
- Do not expose the pump or electrical connections to rain or wet conditions.
- Avoid using extension cords unless absolutely necessary. If an extension cord is used, ensure it is rated for outdoor use and has the correct gauge for the pump's power requirements.
- Never carry the pump by its power cord.
- Regularly inspect the power cord for damage. If damaged, have it replaced by a qualified electrician.
3. 패키지 내용
아래 나열된 모든 품목이 포함되어 있고 손상되지 않았는지 포장을 풀 때 확인하세요.
- 1 x Total TWP47506 750W Automatic Jet Water Pump
- 1 x 압력 스위치
- 1 x Stainless Steel Hose
- 1 x 압력 게이지
- 1 x Three-way Brass Fitting
- 사용 설명서 (본 문서)
4. 기술 사양
| 사양 | 값 |
|---|---|
| 모델 번호 | TWP47506 |
| 유형 | Self-priming Automatic Jet Pump |
| 정격 전력 | 750W(1.0마력) |
| 권tage | 220-240V |
| 빈도 | 50Hz |
| 맥스 헤드 | 45 미터 |
| 최대 유량 | 60리터/분 |
| 최대 흡입 | 9 미터 |
| 파이프 직경 | 1 x 1 인치 |
| 모터 유형 | Copper Wire Induction Motor (Brushless) |
| 임펠러 재질 | 스테인리스 스틸 |
| 펌프 Casing 재료 | 주철 |
| 케이블 길이 | 0.3 미터 |
| Tank Capacity (Cylindrical) | 24리터 |
| 제품 크기(L x W x H) | 30 x 19 x 22cm |
| 품목 무게 | 1.5kg |
| 색상 | 은 |
5. 설정 및 설치
5.1 배치
- Position the pump on a firm, level, and dry surface.
- 과열을 방지하기 위해 펌프 주변에 적절한 환기를 확보하세요.
- Protect the pump from direct exposure to weather elements (rain, direct sunlight, frost).
- Keep the pump as close as possible to the water source to minimize suction lift and maximize efficiency.
5.2 파이프 연결
The pump is equipped with standard inch fittings for both suction and discharge pipes.
- 흡입 파이프 : Connect a rigid, airtight suction pipe (1 inch diameter) to the pump's inlet. Ensure all connections are sealed to prevent air leaks, which can affect priming and pump performance. A foot valve with a strainer should be installed at the end of the suction pipe submerged in the water source to prevent debris from entering the pump and to maintain prime.
- 배출 파이프: Connect a discharge pipe (1 inch diameter) to the pump's outlet. Use the provided three-way brass fitting, pressure switch, and pressure gauge as part of your water supply system. Ensure all connections are secure.
5.3 펌프 프라이밍
This is a self-priming pump, but initial priming is crucial for proper operation. Before first use or after the pump has run dry:
- 흡입관이 수원에 완전히 잠겨 있는지 확인하십시오.
- Locate the priming plug on the top of the pump casing.
- Unscrew the priming plug and slowly fill the pump casing에 깨끗한 물을 넘칠 때까지 부으세요.
- Replace and securely tighten the priming plug.
- Open any valves on the discharge side to allow air to escape during startup.
5.4 전기 연결
- Connect the pump's power cord to a grounded electrical outlet (220-240V, 50Hz).
- Ensure the electrical circuit is protected by a Residual Current Device (RCD) for added safety.
6. 운영
6.1 펌프 시동
- Ensure the pump has been properly primed (Section 5.3).
- Verify all pipe connections are secure and leak-free.
- Plug the pump into the power outlet. The pump will start automatically if connected to an automated system with a pressure switch.
- Observe the pressure gauge. The pressure should rise as the pump builds pressure.
- If the pump does not draw water within a few minutes, switch it off, re-prime, and check for air leaks in the suction line.
6.2 자동 작동
When integrated into a water supply system with the included pressure switch, the pump will automatically start when water pressure drops (e.g., when a tap is opened) and stop when the desired pressure is reached (e.g., when the tap is closed). The 24-liter cylindrical tank helps maintain consistent pressure and reduces pump cycling.
6.3 펌프 정지
For temporary shutdown, close all water outlets. The pump will stop automatically if operating in an automated system. For complete shutdown or extended periods of non-use, unplug the pump from the power supply.
7. 유지관리
Regular maintenance ensures optimal performance and extends the lifespan of your pump. Always disconnect the power supply before performing any maintenance.
7.1 정기점검
- 전원 코드와 플러그에 손상된 흔적이 있는지 검사하십시오.
- Check all pipe connections for leaks. Tighten if necessary.
- Ensure the foot valve strainer is clear of debris. Clean if clogged.
- 작동 중 이상한 소음이 들리는지 주의 깊게 살펴보십시오. 이상한 소음은 문제가 발생했음을 나타낼 수 있습니다.
7.2 청소
광고로 펌프 외부를 닦아주세요.amp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the motor's ventilation openings are free from dust and debris.
7.3 동계화(추운 기후용)
펌프가 영하의 온도에 노출될 경우 손상을 방지하기 위해 반드시 물을 빼내야 합니다.
- 전원공급장치를 분리하세요.
- 펌프에서 물을 모두 빼내세요asing by unscrewing the drain plug (if present) or by tilting the pump.
- Disconnect the suction and discharge pipes and drain them completely.
- 펌프를 건조하고 서리가 내리지 않는 곳에 보관하세요.
8. 문제 해결
고객 지원팀에 문의하기 전에 다음 표를 참조하여 일반적인 문제와 해결책을 확인하세요.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 펌프가 시작되지 않습니다 | 전원 공급이 없습니다 전원 코드/플러그 불량 모터 과부하 보호 장치가 작동했습니다. |
전원 연결 및 콘센트를 확인하세요 검사하고 손상된 경우 교체하십시오. Allow motor to cool, then restart. Check for blockages. |
| 펌프는 작동하지만 물이 나오지 않습니다. | 펌프가 프라이밍되지 않음 흡입 라인의 공기 누출 흡입 리프트가 너무 높음 Foot valve clogged or stuck Water source empty |
Re-prime the pump (Section 5.3) Check all suction connections for leaks and tighten Relocate pump closer to water source Clean or replace foot valve Ensure adequate water in source |
| 유량 또는 압력이 낮음 | Partial blockage in pipes/impeller 흡입 라인의 공기 누출 마모된 임펠러 Incorrect pressure switch setting |
Inspect and clear blockages Check and seal suction connections 자격을 갖춘 서비스 담당자에게 문의하세요 Adjust pressure switch according to manufacturer guidelines (if adjustable) |
| Pump cycles on and off frequently | Leak in discharge system Pressure tank pre-charge incorrect 압력 스위치에 결함이 있습니다 |
Check for leaks in pipes, fittings, or fixtures Check and adjust pressure tank air pre-charge Inspect and replace pressure switch if necessary |
9. 보증 및 지원
This Total TWP47506 750W Automatic Jet Water Pump comes with a standard manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions, including warranty period and coverage details.
For technical assistance, spare parts, or warranty claims, please contact Total customer support through your retailer or visit the official Total website for contact information in your region. When contacting support, please have your model number (TWP47506) and purchase date available.
