MOUNTUP 28XTu2564

MOUNTUP 풀모션 TV 벽걸이 마운트(모델 28XTu2564) 사용 설명서

Model: 28XTu2564 | Brand: MOUNTUP

소개

Welcome and thank you for choosing the MOUNTUP Full Motion TV Wall Mount. This manual provides essential information for the safe and correct installation, operation, and maintenance of your TV wall mount. Please read all instructions carefully before beginning installation to ensure proper setup and to prevent damage or injury.

안전 정보

설치 및 사용 시에는 항상 다음 안전 예방 조치를 준수하세요.

패키지 내용

Before installation, verify that all components are present and undamaged. If any parts are missing or defective, contact MOUNTUP customer service.

명세서

모델 번호28XTu2564
상표마운트업
TV 크기 호환성26 ~ 65 인치
중량 용량88파운드(40kg)
VESA 호환성Min: 75x75mm (3"x3"), Max: 400x400mm (16"x16")
벽 유형 호환성16" Wood Studs (Not for alone dry wall application). Concrete/Brick walls require anchors.
기울기 각도+5° / -13°
회전 각도±45° (Maximum swivel angle depends on TV size)
레벨 조정±3° (Post-installation)
벽 거리3인치에서 15.7인치까지
재료합금강

설정 및 설치

설치 전 확인 사항

Before you begin, it is crucial to confirm compatibility and prepare your installation area.

Diagram showing compatible wall types: wood stud, concrete wall, and brick wall.

Figure 1: Compatible Wall Types. The mount is suitable for 16-inch wood studs, concrete walls, and brick walls. Anchors are required for concrete and brick installations.

Diagram showing TV size compatibility from 26 to 65 inches and VESA compatibility from 75x75mm to 400x400mm.

Figure 2: TV Size and VESA Compatibility. This mount fits TVs from 26 to 65 inches with VESA patterns ranging from 75x75mm to 400x400mm.

설치 단계

Follow these steps carefully for a secure installation. The main part of the TV mount is pre-assembled for convenience.

Three-step diagram illustrating the installation process: 1. Attach brackets to TV, 2. Attach wall plate to wall, 3. Hang and secure TV to wall plate.

그림 3: 이상view of the 3-Step Easy Installation Process.

1단계: TV에 브래킷 부착

  1. 화면 손상을 방지하기 위해 TV를 부드럽고 깨끗한 표면에 화면이 아래로 향하도록 조심스럽게 놓으십시오.
  2. Align the TV brackets with the mounting holes on the back of your TV.
  3. TV 장착 구멍에 맞는 나사, 와셔, 스페이서를 하드웨어 키트에서 선택하십시오.
  4. Securely fasten the brackets to the TV using a screwdriver. Do not overtighten.

2단계: 벽판을 벽에 부착

  1. TV를 설치할 원하는 높이와 위치를 정하세요.
  2. Use a stud finder to locate the center of two adjacent wood studs (16-inch spacing). Mark the pilot hole locations.
  3. For concrete or brick walls, use a drill to create pilot holes at the marked locations and insert the appropriate anchors.
  4. Position the wall plate against the wall, aligning the holes with your marks. Use the included bubble level to ensure it is perfectly horizontal.
  5. Secure the wall plate to the wall using the lag bolts (for wood studs) or anchors and bolts (for concrete/brick). Tighten all bolts firmly.
Diagram showing the wall mount attached to a wall, indicating compatibility with 8, 12, and 16-inch stud spacing.

Figure 4: Stud Spacing Compatibility. Ensure your wall studs align with the mount's design for secure installation.

Step 3: Hang and Secure TV to Wall Plate

  1. 다른 사람의 도움을 받아 부착된 브래킷을 이용해 TV를 조심스럽게 들어 올려 벽면 고정판에 걸어주세요.
  2. TV가 벽걸이 받침대에 제대로 고정되었는지 확인하십시오.
  3. Locate the safety screws or locking mechanisms on the bottom of the TV brackets and tighten them to prevent accidental dislodging.

작동 지침

This full motion TV mount allows for flexible adjustment of your TV's position to achieve optimal view각도를 나타냅니다.

조정 View잉 각도

Illustration showing a TV mounted on the wall, extending and tilting to reduce glare and neck strain.

Figure 5: Tilt Adjustment. Adjust the TV's vertical angle to minimize glare and enhance view편안함을.

Illustration showing a TV mounted on an articulating arm, swiveling to the side for flexible view주고받음.

Figure 6: Swivel Adjustment. Reposition your TV horizontally for optimal viewing from different areas of the room.

Illustration showing a TV mounted on the wall with arrows indicating a post-installation leveling adjustment of plus or minus 3 degrees.

Figure 7: Post-Installation Leveling. Fine-tune the TV's horizontal alignment after mounting.

유지

정기적인 유지 관리는 TV 벽걸이 거치대의 수명과 안전한 작동을 보장하는 데 도움이 됩니다.

문제 해결

If you encounter issues during or after installation, consider the following common solutions:

보증 및 지원

MOUNTUP TV wall mount series are backed by a 3년 보호 플랜. Our dedicated customer support team is available to answer any questions you may have regarding installation, operation, or product issues.

For further assistance or detailed diagrams, please refer to the official installation manual:

공식 설치 설명서(PDF) 다운로드

관련 문서 - 28XTu2564

사전view MOUNTUP MU0057 풀모션 TV 벽걸이 설치 가이드
MOUNTUP MU0057 풀모션 TV 벽걸이 거치대 설치 가이드입니다. 목재 스터드 및 콘크리트 부착, VESA 규격 호환, 안전 및 최대 31kg(77파운드) TV 조정 방법을 다룹니다.
사전view MOUNTUP MU0014 TV 벽걸이 설치 가이드
안전, 하드웨어, VESA 호환성, 벽면 장착(목재 스터드 및 콘크리트), 풀모션 틸팅 및 레벨링 조정 등을 포함한 MOUNTUP MU0014 TV 벽면 장착에 대한 자세한 설치 지침입니다.
사전view MOUNTUP YZ2305 TV 벽걸이 마운트 설치 가이드
Comprehensive installation instructions for the MOUNTUP YZ2305 TV Wall Mount, featuring a long extension arm, smooth swivel, and tilt capabilities. This guide details VESA compatibility, load capacity, wall mounting options (wood stud, concrete), and adjustment procedures for optimal view주고받음.
사전view MOUNTUP MU0036 유니버설 TV 스탠드 설치 가이드
MOUNTUP MU0036 범용 TV 스탠드의 자세한 설치 설명서입니다. 이 스탠드는 37인치에서 55인치까지의 평면 TV에 적합하며, 최대 40kg(88lbs)의 무게와 최대 400x400mm의 VESA 패턴을 지원합니다. 강화 유리 받침대와 회전 기능을 갖춘 높이 조절식 스탠드를 사용하여 TV를 안전하게 조립하고 설치하는 방법을 알아보세요.
사전view MOUNTUP YZ2352 US1.0 TV 벽걸이 마운트 설치 가이드
MOUNTUP YZ2352 US1.0 TV 벽걸이 마운트의 자세한 설치 설명서입니다. 이 설명서에는 목재 스터드 및 콘크리트 벽에 설치하는 방법, VESA 호환성, 안전하고 최적의 설치를 위한 안전 수칙이 포함되어 있습니다. view뛰어난 사용 경험을 제공합니다. 최대 88파운드(약 40kg) 무게의 TV를 지원하며, VESA 패턴은 최대 400x400mm입니다.
사전view MOUNTUP MU0029 TV 벽걸이 설치 가이드
VESA 호환성, 벽면 플레이트 장착(목재 스터드 및 콘크리트), 14인치에서 40인치까지의 평면 TV에 대한 최종 조정을 다루는 MOUNTUP MU0029 TV 벽면 마운트에 대한 포괄적인 설치 설명서입니다.