소개
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your FibroPool 2 HP Swimming Pool Pump (Model FP200). Please read this manual thoroughly before installation and operation to ensure proper use and to prevent damage or injury.
The FibroPool FP200 is a high-efficiency single-speed motor pump designed for in-ground pools and spas. It features a durable, corrosion-proof construction and is engineered for reliable performance.
안전 정보
Always observe basic safety precautions when installing and operating this electrical equipment. Failure to follow instructions can result in serious injury or death.
- Ensure the pump is connected to a 240-volt, 60 Hz power supply only. It is not convertible to 120 volts.
- 설치는 자격을 갖춘 전문가가 수행해야 하며 모든 지역 및 국가 전기 및 배관 규정을 준수해야 합니다.
- 서비스나 유지관리를 수행하기 전에는 항상 펌프의 전원을 분리하세요.
- 펌프를 비워둔 채로 작동하지 마십시오. 작동하기 전에 펌프에 물이 충분히 공급되어 있는지 확인하십시오.
- 어린이들이 펌프와 수영장 장비 구역에 접근하지 못하도록 하십시오.
- Do not operate the pump if any parts are damaged or missing.
제품 끝view
The FibroPool FP200 pump is engineered for optimal performance and longevity. Key features include:
- 2 horsepower motor, pushing up to 8100 GPH at 3450 RPM.
- High-efficiency single-speed motor designed to reduce energy consumption.
- Durable, weatherproof chassis suitable for various environments.
- Integrated pedestal base for stable mounting.
- Super-sized 124 cubic-inch strainer basket with a clear twist-lock lid for easy inspection and cleaning.
- 2-inch unions included for simplified installation and servicing.
그림 1: 측면 view of the FibroPool FP200 Swimming Pool Pump, showing the motor and pump housing.
그림 2: 반대편 view of the FibroPool FP200 Swimming Pool Pump, highlighting the clear strainer lid.
설치
Proper installation is crucial for the pump's performance and longevity. It is recommended that installation be performed by a certified pool technician or electrician.
사이트 선택
- 배관으로 인한 마찰 손실을 최소화하기 위해 펌프를 수영장에 최대한 가깝게 설치하십시오.
- Ensure the location is well-ventilated and protected from direct sunlight and excessive moisture.
- Provide adequate space around the pump for routine maintenance and servicing.
- Mount the pump on a solid, level base to prevent vibration and noise. The integrated pedestal base provides stability.
배관 연결
- The pump is equipped with 2-inch unions for easy connection to your existing plumbing system.
- 안전하고 누수 없는 연결을 위해 적절한 PVC 접착제와 프라이머를 사용하십시오.
- Ensure all plumbing is properly supported to avoid strain on the pump.
전기 연결
경고: Electrical wiring should only be performed by a licensed electrician.
- The FibroPool FP200 operates on 240 volts, 60 Hz. Verify your power supply matches these requirements.
- 펌프를 누전 차단기(GFCI)로 보호되는 전용 회로에 연결하십시오.
- The pump includes a 6-foot weatherproof power cable. Ensure all connections are secure and weatherproof.
- Refer to local electrical codes for specific wiring requirements.
그림 3: 뒤로 view of the FibroPool FP200 pump, showing the electrical connection box and wiring.
작동 지침
펌프 프라이밍
Before starting the pump for the first time, or after draining for maintenance, the pump must be primed.
- 수영장에서 펌프로 물이 흐를 수 있도록 모든 밸브가 열려 있는지 확인하십시오.
- Remove the clear twist-lock lid from the strainer basket.
- 채반에 물을 넘칠 때까지 채우세요.
- Replace the lid, ensuring it is securely twisted and sealed.
- Turn on the pump. The pump should prime within a few minutes. If not, turn off the pump, re-prime, and check for air leaks in the suction line.
정상 작동
- Once primed, the pump will circulate water through your pool system.
- Monitor the pressure gauge on your filter system to ensure it is within the normal operating range.
- The clear top lid allows for easy visual inspection of the strainer basket to determine when cleaning is needed.
유지
Regular maintenance ensures the longevity and efficient operation of your FibroPool pump.
거름망 청소
The super-sized 124 cubic-inch basket has extra leaf-holding capacity, extending time between cleanings. However, regular inspection is recommended.
- 펌프를 끄고 전원을 분리하세요.
- Twist and remove the clear lid from the strainer housing.
- 바구니를 꺼내서 안에 있는 쓰레기를 비우세요.
- 바구니를 물로 깨끗이 헹구세요.
- 뚜껑의 O링에 균열이나 마모가 있는지 검사하십시오. 필요한 경우 교체하십시오.
- Return the basket to the housing, ensuring it is seated correctly.
- Replace the lid, twisting it securely to create a watertight seal.
- 재시동하기 전에 필요한 경우 펌프에 다시 물을 채우십시오.
방한
In areas subject to freezing temperatures, proper winterization is essential to prevent damage.
- Drain all water from the pump by removing the drain plugs.
- Store the pump in a dry, protected area if possible.
- Consult a pool professional for comprehensive winterization procedures for your entire pool system.
문제 해결
This section provides solutions to common issues you may encounter with your FibroPool pump.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 펌프가 시작되지 않습니다 | No power, tripped breaker/GFCI, faulty wiring, motor issue. | Check power supply, reset breaker/GFCI. Verify electrical connections. If motor hums but doesn't start, contact a qualified technician. |
| Pump runs but does not prime or has low flow | Air leak in suction line, clogged strainer basket, low water level in pool, closed valves, impeller obstruction. | Check and seal all suction line connections. Clean strainer basket. Ensure adequate pool water level. Open all necessary valves. Inspect impeller for debris. |
| 과도한 소음 또는 진동 | Air leak, cavitation, loose mounting, worn bearings. | Check for air leaks. Ensure pump is properly primed. Tighten mounting bolts. If noise persists, motor bearings may be worn; contact service. |
| 펌프에서 물이 새는 현상 | Loose plumbing connections, worn shaft seal, damaged O-rings. | Tighten plumbing connections. Inspect and replace O-rings on strainer lid and unions. A leaking shaft seal requires professional service. |
명세서
Detailed technical specifications for the FibroPool 2 HP Swimming Pool Pump FP200.
| 기인하다 | 값 |
|---|---|
| 상표 | 파이브로풀 |
| 모델 번호 | FP200 |
| 마력 | 2마력 |
| 권tage | 240 볼트 |
| 빈도 | 60Hz |
| 왓tage | 1.5kw |
| 최대 유량 | 분당 135갤런(시간당 8100갤런) |
| 회전수 | 3450 RPM |
| 재료 | Aluminum (Motor), Heavy Duty Plastic (Housing) |
| 품목 무게 | 34.9파운드 |
| 패키지 크기 | 25 x 14.5 x 11.5 인치 |
| 사운드 레벨 | 45데시벨 |
| 한국어: | 850013473021 |
Figure 4: Performance Curve Chart. The FP200 curve illustrates the relationship between pump head (pressure) and flow rate.
보증 및 지원
For warranty information, technical support, or service inquiries, please contact FibroPool directly. Keep your purchase receipt as proof of purchase.
While specific warranty details are not provided in this manual, FibroPool is committed to providing quality products and customer satisfaction. For the most current warranty terms and conditions, please visit the official FibroPool web사이트 또는 고객 서비스 부서에 문의하십시오.
You can often find contact information on the product packaging, the manufacturer's web사이트를 통해서 또는 제품을 구매한 소매업체를 통해서도 가능합니다.
