AbleNet Blue2 FT FeatherTouch 무선 스위치 사용 설명서

소개

The AbleNet Blue2 FT FeatherTouch Wireless Switch is an assistive technology device designed to provide wireless switch access to various devices, including iPads, computers, and mobile devices. It features integrated FeatherTouch switches for precise activation and offers Bluetooth connectivity for a wire-free experience. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your Blue2 FT device.

패키지 내용

• AbleNet Blue2 FT FeatherTouch Wireless Switch
• 장착 하드웨어
• USB-C charging cable (not explicitly listed but implied by USB-C port)

장치 오버view

이미지 1: 맨 위 view of the AbleNet Blue2 FT FeatherTouch Wireless Switch. This image displays the device from above, highlighting its two large, circular, pressure-sensitive switches, one in blue and one in orange. The AbleNet logo and small indicator lights are visible in the central area between the switches.

이미지 2: 맨 아래 view of the AbleNet Blue2 FT FeatherTouch Wireless Switch. This image shows the underside of the device, where regulatory information, a QR code for instructions, and four small toggle switches for mode, light feedback, sound feedback, and power (I/O) are located.

이미지 3: 옆 view of the AbleNet Blue2 FT FeatherTouch Wireless Switch. This image focuses on one side of the device, clearly showing the USB-C port used for charging the unit.

이미지 4: 옆 view of the AbleNet Blue2 FT FeatherTouch Wireless Switch. This image displays the opposite side of the device, featuring two 3.5mm input jacks labeled S1 and S2 for external switches, a USB-A port, and a Bluetooth icon indicating wireless connectivity.

설치 지침

1. 장치 충전

Before initial use, fully charge your Blue2 FT device. Connect the provided USB-C cable to the charging port on the side of the device (refer to Image 3) and plug the other end into a standard USB power adapter or computer USB port. The indicator light will show charging status.

2. 전원 켜기 / 끄기

Locate the I/O (Power) switch on the bottom of the device (refer to Image 2). Slide the switch to the 'On' position to power on the Blue2 FT. Slide it to 'Off' to power down.

3. 블루투스 페어링

1. Ensure the Blue2 FT is powered on.
2. On your target device (iPad, computer, or mobile device), navigate to the Bluetooth settings.
3. 검색 available Bluetooth devices. The Blue2 FT should appear in the list.
4. Select the Blue2 FT to initiate pairing. Follow any on-screen prompts to complete the connection.
5. Once paired, the device's indicator light will confirm a successful connection.

4. Connecting External Switches (Optional)

The Blue2 FT supports external wired switches. Connect your external switches to the 3.5mm input jacks labeled S1 and S2 on the side of the device (refer to Image 4). The device can then be configured to use either the integrated FeatherTouch switches or the external switches, or both, depending on the selected mode.

작동 지침

1. Using the FeatherTouch Switches

The Blue2 FT features two integrated FeatherTouch switches. These proximity sensor switches are designed for precise activation with minimal pressure. When activated, the device provides both visual (indicator light) and auditory (click sound) feedback. Simply apply light pressure or a close proximity touch to the blue or orange switch surface to send a command.

2. 작동 모드 선택

The Blue2 FT supports multiple operating modes, allowing it to send various keyboard commands. These modes are typically selected using the mode switch on the bottom of the device (refer to Image 2) or through specific button combinations. The device can send commands such as 공간, 입력하다, 1, 2, 3, 또는 4, making it compatible with a wide range of switch-accessible software.

• 키보드 모드: Sends predefined keyboard commands (e.g., Space, Enter, 1, 2, 3, 4).
• Switch Interface Mode: Allows seamless switching between the integrated FeatherTouch switches and external wired switches connected to S1 and S2.

Refer to the full product documentation (accessible via the QR code on the bottom of the device) for detailed instructions on changing modes and configuring specific commands.

3. Adjusting Feedback

The Blue2 FT offers adjustable visual and auditory feedback. Use the 'Light' and 'Sound' switches on the bottom of the device (refer to Image 2) to enable or disable these feedback options according to user preference.

유지

The Blue2 FT is designed for durability. To ensure its longevity and proper function:

• 청소: 부드러운 천으로 장치를 닦으십시오. damp 천으로 닦으세요. 강한 화학 물질이나 연마성 세제는 피하세요.
• 저장: 사용하지 않을 때는 장치를 서늘하고 건조한 곳에 보관하십시오.
• 배터리 관리 : 배터리 수명 유지를 위해 정기적으로 기기를 충전하십시오. 배터리를 완전히 방전시킨 상태로 장시간 방치하지 마십시오.

문제 해결

• 장치가 켜지지 않음: 기기가 충전되어 있는지 확인하십시오. USB-C 케이블을 사용하여 전원에 연결하십시오.
• Not connecting via Bluetooth:
  • Ensure the Blue2 FT is powered on and in pairing mode (if applicable, check full manual).
  • Verify Bluetooth is enabled on your target device.
  • 기기의 페어링을 해제한 후 다시 페어링해 보세요.
  • Ensure the Blue2 FT is within range of the target device.
• Switches not responding:
  • Check the selected operating mode to ensure it matches your intended use.
  • Verify that visual and auditory feedback are enabled if you rely on them for confirmation.
  • If using external switches, ensure they are properly connected to the S1/S2 jacks.
• 예상치 못한 동작: Try powering the device off and on again. If issues persist, consult the full online manual or contact AbleNet support.

명세서

보증 및 지원

AbleNet is committed to providing reliable assistive technology solutions. The Blue2 FT is designed to meet stringent medical device regulations (MDR, UKCA, MedDo) and undergoes durability testing as part of the ableSTRONG program.

ableCARE Program

이미지 5: AbleNet ableCARE logo.

The ableCARE program offers product support and guidance to assist users and professionals in implementing AbleNet assistive technology effectively. The ableCARE Product Success team is available to provide knowledge and build confidence in using your device.

ableSAFE and ableSTRONG

이미지 6: AbleNet ableSAFE logo.

이미지 7: AbleNet ableSTRONG logo.

ableSAFE products are tested by certified third-party laboratories to meet or exceed global safety standards, ensuring the device is engineered with safety in mind.

ableSTRONG products undergo durability tests to withstand drops, moisture, and dirt, ensuring continued performance in various environmental factors.

연락처 정보

For further assistance or warranty inquiries, please contact AbleNet directly:

You can also scan the QR code on the bottom of your device for direct access to instructions and support resources.