1. 제품 오버view
The RunCam Nano2 is a compact and lightweight FPV camera designed for use in FPV drones and other remote-controlled vehicles. It features a 1/3" CMOS sensor, 700TVL resolution, and an NTSC signal system, providing clear and reliable video feedback for pilots.
Figure 1: RunCam Nano2 FPV Camera with its compact design and wiring harness.
주요 특징은 다음과 같습니다.
- 신호 시스템: NTSC (Non-Switchable)
- 이미지 센서: 1/3" 700TVL CMOS
- 렌즈: 2.1mm (M8) with a Field of View (FOV) of 155°
- 다이나믹 레인지: Auto D-WDR (Digital Wide Dynamic Range)
- 노출 제어 : Auto Gain Control (AGC) and Auto Electronic Shutter Speed
- 무게: 약 3.2g
- 치수: 길이 14mm x 너비 14mm x 높이 16mm
Figure 2: Visual representation of key features including 1/3" CMOS sensor and 700TVL resolution.
2. 사양
| 매개변수 | 값 |
|---|---|
| 이미지 센서 | 1/3인치 CMOS |
| 수평 해상도 | 700TVL |
| 렌즈 | 2.1mm (M8) FOV 155° (Also available in 1.8mm FOV 170° variant) |
| 신호 시스템 | NTSC (Non-Switchable) |
| 신호대잡음비 | >50dB |
| 전자 셔터 속도 | 자동차 |
| 자동 이득 제어 (AGC) | 자동차 |
| 최소 조명 | 0.01Lux@ 1.2F |
| D-WDR | 자동차 |
| 낮/밤 | 색상 |
| 전원 입력 | DC 3-5.5V |
| 현재 소비량 | 110mA @5V / 120mA @3.3V |
| 하우징 소재 | ABS |
| 순중량 | 3.2g |
| 치수 | 길이 14mm x 너비 14mm x 높이 16mm |
Figure 3: The RunCam Nano2 camera demonstrating its lightweight design at 3.2 grams.
Figure 4: Detailed dimensions of the RunCam Nano2 camera.
3. 설정 및 설치
This section guides you through the basic setup and installation of your RunCam Nano2 FPV camera.
3.1 Component Assembly for FPV System
To create a head-tracking FPV system for an RC car, you will typically need FPV goggles, an FPV camera (like the RunCam Nano2) with a Video Transmitter (VTX), and a 3-axis gimbal. The camera is attached to the gimbal, and the gimbal is then connected to the VTX. A custom 3D-printed base can help integrate all components securely.
Video 1: This video demonstrates the assembly process of an FPV camera, VTX, and gimbal system, including mounting on an RC car and activating head tracking in FPV goggles.
3.2 카메라 장착
The RunCam Nano2 is designed for easy integration. Use the provided screws to secure the camera to your drone frame or custom mount. If using an adapter for larger mounting patterns, ensure it is securely fastened.
3.3 배선 연결
Connect the camera's wiring harness to your flight controller or VTX according to the pinout diagram provided with your flight controller/VTX. Ensure correct polarity for power (DC 3-5.5V) and video signal to prevent damage.
3.4 Head Tracking Activation (for compatible systems)
If your FPV goggles and gimbal system support head tracking, activate this feature within your goggles' menu. This allows the camera's view to follow your head movements, enhancing the immersive FPV experience.
4. 사용 설명서
Once installed and powered, the RunCam Nano2 will transmit video in NTSC format. Ensure your FPV goggles or monitor are set to NTSC to receive the correct signal.
4.1 1인칭 View (FPV) Operation
The camera provides a wide 155° FOV, offering an expansive view for navigating your FPV drone or RC vehicle. The Auto D-WDR and Auto Gain Control features help maintain clear image quality across varying light conditions.
Video 2: This video demonstrates the FPV experience using a camera system mounted on an RC car, showcasing the real-time video feed.
5. 유지관리
Proper maintenance ensures the longevity and optimal performance of your RunCam Nano2 FPV camera.
- 렌즈 세척: Gently clean the camera lens with a microfiber cloth and a specialized lens cleaning solution. Avoid abrasive materials that could scratch the lens.
- 연결 확인: Periodically inspect all wiring connections for looseness or damage, especially after crashes or rough handling.
- 저장: Store the camera in a dry, dust-free environment when not in use. Protect the lens from direct impact.
6. 문제 해결
If you encounter issues with your RunCam Nano2, refer to the following common troubleshooting steps:
- 비디오 신호 없음:
- 모든 전원 및 비디오 연결이 안전하고 올바르게 배선되었는지 확인하십시오.
- Ensure your FPV goggles/monitor are powered on and set to the correct NTSC signal system and frequency.
- Check for damage to the camera cable or VTX.
- Poor Image Quality (Blurry, Jello Effect, Color Issues):
- Check if the lens is clean and free from smudges or debris.
- Ensure the lens is properly focused. The lens can be rotated to adjust focus.
- A "jello effect" can sometimes occur with CMOS sensors due to vibrations. Ensure the camera is securely mounted and isolated from excessive vibrations.
- Verify power input is stable and within the specified DC 3-5.5V range.
- 카메라 전원이 켜지지 않음:
- Confirm the power source is providing the correct voltage (DC 3-5.5V).
- Check for any short circuits or damaged wires in the power line.
7. 보증 및 지원
For warranty information, technical support, or further assistance, please visit the official RunCam web대지:
보증 청구를 위해 구매 증빙서류를 보관하세요.
