1. 제품 오버view
The KOHLER Taut widespread faucet, model K-97100-4-CP, is designed for bathroom sink installations, offering a minimalist aesthetic suitable for transitional or contemporary environments. This faucet features a 1.2 gallons per minute (gpm) flow rate and is finished in Polished Chrome. It is equipped with UltraGlide valves for easy installation and leak-free performance.
The faucet's design emphasizes clean lines and robust construction, ensuring both visual appeal and reliable functionality. It is part of the Taut collection, designed to coordinate with other KOHLER showering components.
2. 패키지 내용
Before beginning installation, verify that all components are present in the package. The standard package for the Kohler Taut K-97100-4-CP faucet typically includes the following:
- Fully assembled faucet spout
- 레버 손잡이 두 개
- Pop-up drain assembly with lift rod
- Preassembled supply lines
- Mounting hardware and gaskets
- 설치 지침
3. 설정 및 설치
The Kohler Taut faucet is designed for straightforward installation, often preassembled to simplify the process. It is a widespread faucet, requiring three holes for mounting: one for the spout and one for each handle. Ensure your sink or countertop has the appropriate 8-inch spacing for a widespread installation.
3.1 필요한 도구 및 재료 (포함되지 않음)
- 조절 렌치
- 배관공 퍼티 또는 실리콘 실란트
- 십자 드라이버
- Basin 렌치(선택 사항, 좁은 공간용)
- 안전 안경
3.2 설치 단계
- 장착 표면 준비: Ensure the sink or countertop surface is clean and dry.
- Install Faucet Handles: Insert the handle assemblies into the outer holes. Secure them from underneath the counter using the provided washers and nuts.
- 수도꼭지 주둥이 설치: Place the spout assembly into the center hole. Apply plumber's putty or silicone sealant around the base of the spout if recommended by local codes or the specific installation guide. Secure the spout from underneath with its washer and nut.
- 공급망 연결: Attach the preassembled supply lines from the faucet to your hot and cold water supply valves. Hand-tighten first, then use an adjustable wrench for a final quarter-turn. Do not overtighten.
- 배수 어셈블리를 설치하십시오: Follow the specific instructions for installing the pop-up drain. Ensure a watertight seal with plumber's putty or silicone sealant around the drain flange. Connect the lift rod to the drain mechanism.
- 누출 테스트: Turn on the water supply and check all connections for leaks. Operate the faucet handles and drain stopper to ensure proper function.
4. 사용 설명서
The Kohler Taut widespread faucet is designed for intuitive operation with its lever handles and integrated pop-up drain.
4.1 물 흐름 및 온도 제어
- 켜기/끄기: Rotate the left handle counter-clockwise for hot water and the right handle counter-clockwise for cold water. Rotate clockwise to turn off.
- 흐름 조절: The further the handle is rotated, the greater the water flow.
- 온도 조정: 원하는 온도가 될 때까지 두 손잡이를 동시에 조절하여 뜨거운 물과 차가운 물을 섞으세요.
4.2 Drain Stopper Operation
The faucet includes a pop-up drain with a lift rod located behind the spout. To operate the drain:
- Close Drain: Push the lift rod down to close the drain and fill the sink.
- Open Drain: Pull the lift rod up to open the drain and allow water to flow out.
5. 유지관리 및 관리
Proper care and maintenance will ensure the longevity and appearance of your Kohler Taut faucet.
5.1 청소 지침
- 수도꼭지는 부드러운 천으로 정기적으로 청소하세요.amp 천과 순한 비누.
- 세척 후 물로 깨끗이 헹구세요.
- 물 얼룩이 생기는 것을 방지하려면 부드러운 천으로 수도꼭지를 말리세요.
5.2 Avoid Harsh Cleaners
Do not use abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the Polished Chrome finish. Products containing ammonia, bleach, or alcohol should also be avoided.
5.3 Valve Maintenance
The faucet is equipped with UltraGlide valves designed for leak-free performance. In case of reduced flow or persistent drips, the valve cartridges may need inspection or replacement. Consult a qualified plumber or Kohler customer service for assistance.
6. 문제 해결
This section addresses common issues you might encounter with your Kohler Taut faucet.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 낮은 물 흐름 | Clogged aerator; partially closed supply valve; debris in supply lines. | Remove and clean the aerator. Ensure supply valves are fully open. Flush supply lines. |
| 주둥이에서 누수 | Worn valve cartridge; debris in cartridge. | Replace valve cartridge. Clean debris from cartridge. |
| 수도꼭지 밑부분에서 물이 샙니다 | Loose mounting nuts; worn gaskets. | Tighten mounting nuts. Replace gaskets. |
| 뻣뻣한 손잡이 | 카트리지 내부에 미네랄이 축적되어 마모된 카트리지입니다. | Clean or replace valve cartridges. |
| 배수구 마개가 제대로 밀봉되지 않음 | Improperly adjusted lift rod; debris in drain. | Adjust lift rod connection. Clear drain of debris. |
If you are unable to resolve an issue using the troubleshooting steps above, it is recommended to contact Kohler customer service or a qualified plumbing professional.
7. 사양
Detailed specifications for the Kohler Taut K-97100-4-CP Widespread Bathroom Sink Faucet:
| 특징 | 세부 사항 |
|---|---|
| 상표 | 코엘러 |
| 모델명 | Taut |
| 모델 번호 | K-97100-4-CP |
| 마무리 유형 | 광택 크롬 |
| 재료 | 금속 (손잡이 재질: 세라믹) |
| 장착 유형 | Deck Mounted, Widespread |
| 핸들 수 | 2 (레버 손잡이) |
| 홀 카운트 | 3 |
| 유량 | 분당 1.2 갤런 |
| 밸브 유형 | Cartridge Valve (UltraGlide) |
| 주둥이 높이 | 4 인치 |
| 품목 무게 | 6 파운드 |
| 한국어: | 885612710277 |
| 특징 | 설치가 쉽습니다 |
8. 보증 정보
The Kohler Taut K-97100-4-CP Widespread Bathroom Sink Faucet is covered by the KOHLER 수도꼭지 평생 제한 보증. This warranty typically covers defects in material and workmanship for as long as the original consumer/purchaser owns their home. For complete details regarding terms, conditions, and limitations of the warranty, please refer to the official Kohler website or contact Kohler customer service directly.
9. 고객 지원
For further assistance, technical support, or warranty claims, please contact Kohler customer service through their official website or the contact information provided in your product packaging. When contacting support, please have your model number (K-97100-4-CP) and purchase date available.
You can visit the official Kohler website for additional resources, FAQs, and product registration: www.kohler.com
