Rolls RM169 전문가용 블루투스 오디오 믹서 사용 설명서

1. 서론

구매해주셔서 감사합니다asing the Rolls RM169 Professional Bluetooth Audio Mixer. This manual provides detailed instructions for the proper setup, operation, and maintenance of your new audio mixer. Please read this manual thoroughly before operating the unit to ensure optimal performance and longevity.

2. 안전 지침

감전, 화재 또는 장치 손상의 위험을 줄이려면 다음 안전 예방 조치를 준수하세요.

• 전원: Connect the unit only to the specified power supply as indicated on the unit or in this manual.
• 수분: 제품을 비나 습기에 노출시키지 마십시오. 꽃병 등 액체가 담긴 물건을 제품 위에 올려놓지 마십시오.
• 통풍: 충분한 환기를 유지하세요. 환기구를 막지 마세요.
• 열: 라디에이터, 난방 조절기, 스토브 또는 기타 장치(다음 포함)와 같은 열원 근처에 장치를 두지 마십시오. amp열을 생성하는 발전기.
• 청소: 마른 천으로만 닦으십시오. 청소하기 전에 전원을 차단하십시오.
• 서비스: 이 장치를 직접 수리하려고 하지 마십시오. 모든 수리는 자격을 갖춘 서비스 담당자에게 맡기십시오.
• 케이블 : 전원 코드가 밟히거나 끼지 않도록 보호하세요. 특히 플러그, 편의용 콘센트 및 기기에서 나오는 부분은 보호하세요.

3. 특징

The Rolls RM169 Professional Bluetooth Audio Mixer offers a range of features designed for versatile audio mixing:

• 6-channel Analog Audio Mixer
• Integrated Bluetooth Connectivity
• Dedicated Headphone Output
• 콘덴서 마이크용 팬텀 파워
• Individual Level and Tone controls for inputs

4. 제어 및 연결

4.1 전면 패널 레이아웃

The front panel of the RM169 provides access to all primary controls and input connections.

그림 1: 앞쪽 view of the Rolls RM169 mixer. This image displays the input jacks for MIC ONE and MIC TWO, along with their respective LEVEL and TONE controls. Channels 1 through 4 also have LEVEL controls. The BASS and TREBLE equalization knobs are visible, as well as the HEADPHONE LEVEL and OUTPUT controls. On the right, the BLUETOOTH ID (ROLLSBT) and POWER indicator are shown, along with the RESET button.

• MIC ONE / MIC TWO (XLR/TRS Combo Jacks): Inputs for microphones or line-level sources.
• LEVEL (MIC ONE, MIC TWO, 1-4): Adjusts the input gain for each respective channel.
• TONE (MIC ONE, MIC TWO): Adjusts the tonal characteristics (brightness/darkness) of the microphone inputs.
• 저음/고음: Global equalization controls for the main mix.
• 헤드폰 레벨: 헤드폰 출력의 볼륨을 제어합니다.
• 산출: Master volume control for the main outputs.
• BLUETOOTH ID (ROLLSBT): Displays the Bluetooth pairing name.
• 전원 표시기: 장치의 전원이 켜지면 켜집니다.
• RESET : Button to reset Bluetooth connection.

4.2 후면 패널 연결

The rear panel houses the power input and main audio output connections.

그림 2: 뒤쪽 view of the Rolls RM169 mixer. This image shows the 15 VDC power input, the MAIN OUTPUTS (LEFT and RIGHT) available via XLR and RCA connectors. SOURCE INPUTS 1 through 4 are shown as RCA jacks. A MIC/FX INSERT jack is present, along with MICROPHONE 1 and 2 XLR inputs and a PHANTOM POWER switch.

• 15 VDC Power Input: 여기에 포함된 전원 어댑터를 연결합니다.
• MAIN OUTPUTS (XLR & RCA): Balanced XLR and unbalanced RCA outputs for connecting to an amp앰프, 파워드 스피커 또는 녹음 장치.
• SOURCE INPUTS (1-4 RCA): Unbalanced RCA inputs for line-level devices such as CD players, media players, or other audio sources.
• MIC/FX INSERT: Allows for the insertion of external effects processors for the microphone channels.
• MICROPHONE 1 / MICROPHONE 2 (XLR): Dedicated XLR inputs for microphones.
• 팬텀 파워 스위치: Activates +48V phantom power for condenser microphones connected to the XLR inputs.

5. 설정

Follow these steps to set up your RM169 mixer:

1. 놓기: Place the RM169 on a stable, flat surface or mount it in a standard 19-inch rack using appropriate rack ears (not included). Ensure adequate ventilation around the unit.
2. 전원 연결: Connect the supplied 15V DC power adapter to the 15 VDC input on the rear panel of the RM169. Plug the adapter into a suitable AC power outlet. Do not power on the unit yet.
3. 출력 연결: Connect the MAIN OUTPUTS (XLR or RCA) on the rear panel of the RM169 to the inputs of your amp앰프, 파워드 스피커 또는 녹음 장치.
4. 입력 연결:
   • For microphones, connect them to the MIC ONE/TWO combo jacks on the front or the dedicated XLR inputs on the rear. If using condenser microphones, ensure the PHANTOM POWER switch on the rear is set to ON.
   • For line-level devices (e.g., CD players, media players), connect them to the SOURCE INPUTS (1-4) on the rear panel using RCA cables.
5. 헤드폰: If desired, connect headphones to the HEADPHONE output on the front panel.
6. 전원 켜기: Once all connections are made, turn on the RM169. The POWER indicator on the front panel will illuminate.

6. 사용 설명서

This section details the basic operation of the RM169 mixer.

1. 입력 레벨 조정: For each connected source (microphones, line-level devices), slowly turn up the corresponding LEVEL knob (MIC ONE, MIC TWO, 1-4) until the desired volume is achieved. Monitor your output device to prevent clipping or distortion.
2. Tone Control (Microphones): Use the TONE knobs for MIC ONE and MIC TWO to adjust the brightness or warmth of the microphone signals. Turn clockwise for brighter sound, counter-clockwise for warmer sound.
3. Global Equalization: Use the BASS and TREBLE knobs to adjust the overall low and high frequencies of the main mix.
4. 주요 출력 레벨: The OUTPUT knob controls the master volume of the main XLR and RCA outputs. Adjust this to control the overall volume sent to your amp전원 공급기 또는 전원 스피커.
5. 헤드폰 모니터링: Use the HEADPHONE LEVEL knob to adjust the volume of your headphones independently of the main output.

6.1 블루투스 페어링

To connect a Bluetooth device to your RM169:

1. Ensure the RM169 is powered on.
2. On your Bluetooth-enabled device (e.g., smartphone, tablet), go to its Bluetooth settings and enable Bluetooth.
3. 검색 available devices. The RM169 will appear as "ROLLSBT".
4. Select "ROLLSBT" to pair. Once paired, audio from your device will be routed through the RM169.
5. Adjust the level of the Bluetooth input using the corresponding channel level control (typically Channel 4, but refer to the front panel diagram for exact labeling).
6. If you experience connection issues, press the RESET button on the front panel to clear the Bluetooth connection and attempt pairing again.

7. 유지관리

Proper maintenance ensures the longevity of your RM169 mixer:

• 청소: 청소하기 전에 전원 코드를 뽑으십시오. 부드럽고 마른 천으로 제품 외부를 닦으십시오. 액체 세척제나 스프레이형 세척제는 사용하지 마십시오.
• 저장: 장기간 사용하지 않을 경우, 직사광선과 극한 온도 변화를 피해 서늘하고 건조한 곳에 보관하십시오.
• 통풍: 환기구가 먼지나 이물질로 막히지 않았는지 정기적으로 점검하십시오.

8. 문제 해결

If you encounter issues with your RM169, refer to the following common problems and solutions:

• 전원 없음:
  • 전원 어댑터가 본체와 작동하는 전원 콘센트에 제대로 연결되어 있는지 확인하십시오.
  • 전원 콘센트가 활성화되어 있는지 확인하세요.
• 사운드 출력 없음:
  • Check that the RM169 is powered on and the POWER indicator is lit.
  • Ensure the OUTPUT level knob is turned up.
  • Verify that the LEVEL knobs for the active input channels are turned up.
  • 모든 오디오 케이블의 연결이 확실하고 제대로 작동하는지 확인하십시오.
  • 연결된 것을 확인하세요 amp앰프 또는 액티브 스피커가 켜져 있고 정상적으로 작동하고 있습니다.
• 블루투스가 연결되지 않음:
  • Ensure Bluetooth is enabled on your device and it is within range of the mixer.
  • Press the RESET button on the front panel of the RM169.
  • Forget or unpair "ROLLSBT" from your device's Bluetooth settings and attempt to pair again.
  • Ensure no other device is currently paired with the RM169.
• 왜곡된 소리:
  • Reduce the input LEVEL for the affected channel.
  • Reduce the master OUTPUT level.
  • Check the input signal source for distortion.

9. 사양

10. 보증 및 지원

Rolls Corporation warrants its products to the original consumer purchaser to be free from defects in materials and workmanship for a period of one year from the date of purchase. This warranty does not cover damage resulting from accident, misuse, abuse, improper operation, unauthorized modification, or neglect. For warranty service or technical support, please contact your authorized Rolls dealer or visit the official Rolls web연락처 정보 사이트.

보증 청구를 위해 구매 증명서를 보관하십시오.