소개
The Renogy Smart Lithium Iron Phosphate Battery is engineered for reliable and flexible power solutions. It features an auto-balancing function for parallel connections and integrated smart battery management system (BMS) to protect against various abnormal conditions while monitoring charging and discharging processes. Constructed with state-of-the-art battery cells, this unit ensures a long cycle life and exceptional discharge performance, making it an ideal plug-and-play solution for RV, camper, van, marine, and off-grid home energy storage applications.
중요한 안전 정보:
- Always secure all cable connections to the proper specification to ensure good contact between cable lugs and terminals. Over-tightening can cause terminal breakage, while loose connections can lead to terminal meltdown or fire.
- DO NOT string the battery in series. ONLY connect batteries of the same manufacturer and model in parallel.
- 높은 거래량을 피하세요tage differences between paralleled batteries to prevent triggering over-current protection, despite the auto-balancing function.
주요 특징
- Upgraded BMS Circuit: Equipped with seven pairs of Mosfet and two pairs of XT90, allowing a peak current of 150A for emergency charging and discharging. The high-precision BMS offers over 20 protections and warnings, with a 50% increased heat dissipation area for maximum safety.
- 타협하지 않는 품질: High-quality pouch cells pass severe high temperature and puncture tests. Certified with UL1642 (battery cell), UL1973, MSDS, UN38.3, FCC, CE, UKCA, PSE, and MIC. Offers over ten years of lifespan with more than 4,000 cycles (80% DOD).
- 활성화 스위치: An included switch cable allows turning multiple parallel batteries on or off, ensuring safe installation and use. Minimizes battery over-discharge during long periods of connection to appliances by enabling a hibernate mode with extremely low open-circuit voltage.
- Auto-balancing Function: Easily connect up to 8 batteries in parallel, improving the average charging efficiency over the long term.
- 실시간 모니터링: Connect a battery monitor directly via CAT cable or use the BT-2 Bluetooth module with the DC HOME app to monitor multiple battery states in real time. For multiple Renogy devices with communication ports, consider adding Renogy ONE M1 for smart energy monitoring.
설정 및 설치
The Renogy 12V 100Ah LiFePO4 battery is designed for straightforward installation. Ensure all connections are secure and follow polarity guidelines. The compact size and side-mounting capability make it suitable for various applications, including small truck campers, travel trailers, and boats.
The battery features an upgraded Battery Management System (BMS) circuit for enhanced protection and performance.
For systems requiring multiple batteries, the auto-balancing function simplifies parallel connections.
The activation switch provides an energy-saving mode for extended storage.
For general wiring principles for DC-DC chargers, which can be part of your battery system, refer to the video below. Note that this video specifically demonstrates wiring for a Renogy DC-DC charger, not the battery itself.
작동 지침
Once installed, operating your Renogy LiFePO4 battery is straightforward. Utilize the activation switch to manage power flow. The integrated BMS continuously monitors the battery's health, including temperature, and will automatically protect the battery from damage, such as preventing charging below freezing temperatures.
For real-time monitoring, connect a compatible monitor or use the DC HOME app via Bluetooth (with BT-2 module) to view charging/discharging status, State of Charge (SOC), and temperature.
충전 방법
The Renogy 12V 100Ah LiFePO4 battery can be charged using various methods, including solar panels, DC-DC chargers, and AC-DC chargers. The integrated BMS ensures safe charging across different conditions.
Below is a summary of typical charging performance with different methods:
| 충전 방법 | 충전 중 Amps / Duration (approx.) | 노트 |
|---|---|---|
| 100W 휴대용 태양 전지 패널 | 2.9A @ 27 hours | Good for maintaining charge or slow top-off, dependent on sun conditions. |
| 400W Lightweight Solar Suitcase | 21A @ 3 hours | Faster recharge, utilizing MPPT technology. |
| 50A DC to DC Battery Charger (Engine) | 12.5A @ 6 hours | Regular method for keeping battery full while driving. Output may vary with smart alternators. |
| 400W Solar Suitcase & 50A DC-DC Charger (Combined) | 36.2A @ 2 hours | Fastest method, ideal for quick recharges. |
| 20A AC to DC Battery Charger | 19.6A @ 4 hours | Consistent current flow, good for shore power or when solar/engine charging is not an option. |
유지
The Renogy LiFePO4 battery is largely maintenance-free due to its robust design and integrated BMS. However, adhering to the following guidelines will ensure optimal performance and longevity:
- 정기 검사: Periodically check all cable connections for tightness and corrosion. Clean terminals if necessary.
- 저장: For long-term storage, activate the energy-saving mode using the activation switch to minimize self-discharge. Store the battery in a cool, dry place.
- 온도 모니터링: While the BMS protects against extreme temperatures, avoid prolonged exposure to temperatures outside the recommended operating range to maximize lifespan.
문제 해결
The integrated BMS provides comprehensive protection and alerts. If you encounter issues, consult the DC HOME app or your connected monitor for diagnostic information.
- 전원 출력 없음: Check all cable connections for tightness. Ensure the activation switch is in the 'ON' position. Verify the battery's State of Charge (SOC) via the monitoring app.
- 충전 문제: If charging is not occurring, check the temperature via the app. The BMS will prevent charging if the temperature is too low (e.g., below freezing) to prevent damage. Ensure your charging source (solar panel, DC-DC charger, AC-DC charger) is functioning correctly.
- BMS Alerts: If the monitoring app displays a BMS alarm (e.g., low battery temperature, over-current), follow the recommended actions provided by the app or consult the full user manual for detailed troubleshooting steps.
명세서
| 사양 | 값 |
|---|---|
| 상표 | 레노지 |
| 모델 | RBT100LFP12S-G1 |
| 권tage | 12 볼트 |
| 배터리 용량 | 100 아 |
| 배터리 셀 구성 | 리튬철인산(LiFePO4) |
| 최대 연속 방전 전류 | 100A |
| 사이클 수명 | 4000회 이상 사이클(80% DOD) |
| 충전 온도 | 화씨 32도에서 화씨 122도(섭씨 0도에서 50도) |
| 배출 온도 | -4°F ~ 140°F(-20°C ~ 60°C) |
| 제품 치수 | 17.27 x 18.8 x 28.96cm; 11.79kg |
| 호환 장치 | Controller, Solar |
보증 및 지원
보증 정보, 기술 지원 또는 서비스 문의는 Renogy 공식 웹사이트를 참조하십시오. web해당 웹사이트를 방문하거나 Renogy 고객 서비스 센터에 직접 문의하십시오. 보증 청구를 위해 구매 영수증을 보관하십시오.
