waveshare PI4B-4GB Display Kit

웨이브쉐어 7인치 정전식 터치 LCD 디스플레이 키트(라즈베리 파이 4 모델 B용) 사용 설명서

Model: PI4B-4GB Display Kit

소개

This manual provides comprehensive instructions for the setup, operation, and maintenance of your waveshare 7-inch Capacitive Touch LCD Display Kit for Raspberry Pi 4 Model B. Please read this manual thoroughly before use to ensure proper functionality and to maximize your product experience.

패키지 내용

아래 나열된 모든 품목이 패키지에 포함되어 있는지 확인하세요.

Contents of the Waveshare Display Kit

Image: All components included in the waveshare 7-inch Display Kit, including the LCD, Raspberry Pi 4, cables, power adapter, acrylic case parts, and a microSD card with reader.

설치 지침

Follow these steps to assemble and set up your display kit:

  1. 라즈베리 파이를 준비하세요: Insert the provided MicroSD card into the Raspberry Pi 4 Model B.
  2. 라즈베리 파이를 마운트하세요: Secure the Raspberry Pi 4 to the back of the 7-inch LCD display using the provided standoffs and screws. Ensure proper alignment with the display's connectors.
  3. 디스플레이 케이블을 연결하세요:
    • Connect one end of the Micro HDMI cable to the Raspberry Pi's Micro HDMI port and the other end to the display's HDMI input.
    • Connect the USB-A to Micro USB cable from a USB 2.0 port on the Raspberry Pi to the Micro USB port on the display. This provides power for the display's backlight and enables touch functionality.
  4. Assemble the Acrylic Case: Carefully attach the acrylic case components around the assembled display and Raspberry Pi. Refer to the case assembly diagram for correct orientation.
  5. 전원 연결: Plug the USB power adapter into a wall outlet and connect the USB-A to USB-C cable to the Raspberry Pi's USB-C power input.
  6. 초기 부팅: The system should power on automatically. The display will show the boot sequence.
Assembled Waveshare Display Kit with Raspberry Pi

Image: The fully assembled waveshare 7-inch Display Kit, showing the Raspberry Pi 4 mounted behind the screen, connected with cables, and powered by an adapter.

작업

Once the display kit is powered on, the pre-installed operating system (typically Raspbian) will boot. You can interact with the system using the capacitive touch screen.

Capacitive Touch Screen in Use

Image: A hand interacting with the capacitive touch screen, demonstrating its functionality with a graphical user interface.

지원되는 운영 체제

The waveshare 7-inch Display Kit is compatible with various operating systems for the Raspberry Pi 4 Model B:

Supported Operating Systems and Display Angles

Image: Visual representation of the display showing different viewing angles and indicating support for various operating systems like Raspbian, Ubuntu, Kali, and Windows 10 IoT.

주요 특징

Raspberry Pi 4 Model B Board Layout and Features

Image: Detailed diagram of the Raspberry Pi 4 Model B board, highlighting its processor, RAM, various ports (USB, HDMI, Ethernet, GPIO), and wireless capabilities.

유지

문제 해결

화면에 아무것도 표시되지 않습니다.
  • Ensure the Micro HDMI cable is securely connected to both the Raspberry Pi and the display.
  • Verify the Raspberry Pi is receiving power (check the power LED on the Pi).
  • Confirm the MicroSD card is properly inserted and contains a valid operating system image.
터치스크린이 반응하지 않습니다:
  • Check that the USB-A to Micro USB cable is connected from the Raspberry Pi to the display.
  • Ensure the operating system supports touch functionality and that necessary drivers (if any, though typically driver-free for supported OS) are loaded.
  • 라즈베리 파이를 재시작하세요.
시스템이 부팅되지 않습니다:
  • Confirm the power supply is adequate (5V/3A recommended for Raspberry Pi 4).
  • Re-flash the operating system image onto the MicroSD card.
  • 느슨한 연결이나 손상된 구성 요소가 있는지 확인하세요.

기술 사양

디스플레이 크기7 인치
해결1024 x 600
패널 유형IPS
터치타입Capacitive (5-point with Raspbian, 1-point with others)
프로세서Broadcom BCM2711B0, Quad-core 64-bit SoC
숫양4GB LPDDR4
저장16 GB MicroSD Card (included)
무선 연결2.4/5GHz Wi-Fi, Bluetooth 5.0
유선 연결기가비트 이더넷
비디오 출력2x Micro HDMI (up to 4Kp60)
오디오 출력4-pole stereo audio jack
USB 포트2x USB 3.0, 2x USB 2.0
전원 입력USB-C 5V/3A
치수(패키지)9.06 x 6.69 x 2.76 인치
품목 무게1.43파운드
Display Dimensions and Stand Angles

Image: Technical drawing showing the dimensions of the 7-inch display in millimeters and illustrating the two available stand angles (45° and 60°) for the acrylic case.

보증 및 지원

보증 정보 및 기술 지원에 대해서는 웨이브쉐어 공식 웹사이트를 참조하십시오. web사이트를 방문하거나 고객 서비스에 직접 문의하세요. 보증 청구에 대비해 구매 증빙 자료로 구매 영수증을 보관하세요.

온라인 리소스: For additional documentation, tutorials, and community support, visit the waveshare official web대지.

관련 문서 - PI4B-4GB Display Kit

사전view 웨이브쉐어 7인치 HDMI LCD (C) 사용 설명서: 설치 및 사용 안내
이 사용 설명서는 Waveshare 7인치 HDMI LCD(C) 디스플레이의 설정 및 작동 방법을 안내하며, 사양, Raspberry Pi 및 PC 연결 방법, 최적의 성능을 위한 필수 사용 팁을 자세히 설명합니다.
사전view Raspberry Pi용 Waveshare 4인치 DSI LCD 디스플레이: 설정 및 가이드
Raspberry Pi의 기능, 하드웨어 연결, 소프트웨어 설치, 화면 회전, 백라이트 제어 및 문제 해결을 다루는 Waveshare 4인치 DSI LCD 디스플레이에 대한 자세한 가이드입니다.
사전view Waveshare 5인치 1080x1080 원형 IPS LCD 디스플레이 - 사용자 가이드
Waveshare 5인치 1080x1080 원형 IPS LCD 디스플레이를 살펴보세요. 이 가이드에서는 터치 보정 및 연결을 포함하여 Raspberry Pi 및 Windows PC에서의 기능, 사양, 설정에 대해 자세히 설명합니다.
사전view Waveshare 10.1인치 HDMI LCD(G) 사용 설명서: 설정, 사양 및 연결
Waveshare 10.1인치 HDMI LCD(G)와 케이스를 살펴보세요. 이 사용 설명서는 Raspberry Pi, Jetson Nano 및 PC의 필수 사양, 안전 경고, 연결 가이드를 다루고 있으며, 자주 묻는 질문에 대한 답변을 제공합니다.
사전view Waveshare 9.3인치 1600x600 정전식 터치 LCD 디스플레이 - 사양 및 사용 설명서
Waveshare 9.3인치 1600x600 고해상도 정전식 터치 LCD 디스플레이에 대한 종합 가이드입니다. 기능, 사양, 전기적 매개변수, EDID 설정, Raspberry Pi 및 PC 호환성을 위한 자세한 설정 방법을 제공합니다.
사전view Waveshare 3.5인치 RPi LCD(A) 사용자 설명서: 설치 및 사양
Waveshare 3.5인치 RPi LCD(A) 디스플레이 모듈에 대한 종합적인 사용자 설명서입니다. 사양, 설치, Raspberry Pi 연결 및 문제 해결 방법을 다룹니다.