Trevi 0ME3P08 디지털 전파 수신식 기상 관측소 및 알람 시계 사용 설명서

1. 서론

Thank you for choosing the Trevi 0ME3P08 Digital Radio Controlled Weather Station. This device provides accurate timekeeping, indoor and outdoor temperature and humidity readings, and a weather forecast indication. It also functions as an alarm clock. Please read this manual carefully to ensure proper setup and operation.

이미지 1: 앞면 view of the Trevi 0ME3P08 Digital Radio Controlled Weather Station, displaying time, date, indoor/outdoor temperature, humidity, and weather forecast icons.

2. 패키지 내용

• Trevi 0ME3P08 Main Unit
• External Wireless Sensor
• 사용 설명서 (본 문서)

3. 설정

3.1 배터리 설치

1. 메인 유닛: Open the battery compartment cover on the back of the main unit. Insert 2 AAA batteries (not included), ensuring correct polarity (+/-). Close the cover.
2. 외부 센서 : Open the battery compartment cover on the back of the external sensor. Insert 2 AAA batteries (not included), ensuring correct polarity (+/-). Close the cover.

메모: It is recommended to insert batteries into the external sensor first, then into the main unit, to facilitate immediate pairing.

3.2 센서 배치

Place the external sensor in a sheltered outdoor location, away from direct sunlight and rain, to ensure accurate temperature and humidity readings. The maximum wireless range is typically up to 30 meters (100 feet) in open areas. Walls and other obstructions may reduce this range.

Image 2: The Trevi 0ME3P08 Weather Station main unit shown alongside its external wireless sensor, illustrating the two components of the system.

4. 사용 설명서

4.1 Initial Synchronization (Radio Controlled Clock)

Upon battery installation, the weather station will automatically attempt to synchronize with the DCF (or similar) radio signal to set the time and date. This process may take several minutes or up to 24 hours depending on signal strength. Ensure the unit is placed away from electronic interference.

• A signal icon will typically flash during synchronization and become solid once successful.
• If synchronization fails, try repositioning the unit or manually setting the time (refer to the device's physical buttons for manual setting instructions, if available).

4.2 디스플레이 오버view

The LED display shows the following information:

• 시간: 12/24시간 형식.
• 날짜 및 요일: Calendar display.
• 실내 온도 및 습도: Current readings from the main unit.
• 야외 온도: Current reading from the external sensor.
• 일기 예보: Icons indicating predicted weather conditions (e.g., sunny, cloudy, rainy).

4.3 알람 시계 기능

The weather station includes an alarm clock function. Specific buttons for setting and activating the alarm are usually located on the back or top of the unit. Refer to the device's physical buttons and on-screen prompts for detailed alarm setting instructions.

4.4 Backlight LED Display

The unit features a backlight LED display for improved visibility in low light conditions. A dedicated button (often labeled "LIGHT" or "SNOOZE/LIGHT") typically activates the backlight temporarily or adjusts its brightness.

5. 특징

• 12/24h Radio Controlled Clock for automatic time synchronization.
• Integrated Alarm Clock with snooze function.
• Calendar display.
• Internal digital thermometer and hygrometer for indoor conditions.
• External wireless sensor for outdoor temperature detection.
• Graphical weather forecast indication.
• Backlight LED Display for clear visibility.

6. 사양

7. 유지관리

• 부드럽고 마른 천으로 제품을 닦으십시오. 연마성 세제나 용제를 사용하지 마십시오.
• 본체를 직사광선, 극한의 온도 또는 습기에 노출시키지 마십시오.
• 장기간 사용하지 않을 경우 누액을 방지하기 위해 배터리를 제거하십시오.
• Ensure the external sensor is kept clean and free from debris for accurate readings.

8. 문제 해결

• 디스플레이 없음 / 희미한 디스플레이:
  • 배터리 극성을 확인하고 배터리가 새것인지 확인하십시오.
  • Replace all batteries in both the main unit and external sensor.
• 외부 센서가 연결되지 않음:
  • Ensure batteries are correctly installed in the external sensor.
  • Place the external sensor closer to the main unit.
  • Remove and reinsert batteries in both units to force a re-synchronization.
  • 센서를 큰 금속 물체나 전자기 간섭 발생원 근처에 두지 마십시오.
  • If the issue persists, the sensor might be faulty (refer to warranty information).
• Radio Controlled Clock Not Synchronizing:
  • Ensure the unit is placed in an open area, away from electronic devices that may cause interference.
  • 최초 동기화에는 최대 24시간이 소요될 수 있습니다.
  • Try repositioning the unit, especially near a window.
  • Check if manual time setting is available as a temporary solution.
• 온도/습도 측정값 부정확:
  • Ensure the external sensor is not in direct sunlight or exposed to rain.
  • Verify there are no heat sources or vents near the internal sensor.

9. 보증 및 지원

This Trevi product comes with a 2년 제조사 보증. For warranty claims or technical support, please contact your retailer or the official Trevi customer service. Keep your proof of purchase for warranty validation.

자세한 내용은 다음을 방문하세요. Trevi brand page.