1. 안전 정보
Please read all instructions carefully before using the BLS T401 LED Motion Sensor Closet Light. Retain this manual for future reference.
- 장치를 극한의 온도나 직사광선에 노출시키지 마십시오.
- 장치를 물과 높은 습도에서 멀리 두십시오.
- 기기를 분해하거나 개조하지 마십시오. 이는 보증을 무효화하고 안전상의 위험을 초래할 수 있습니다.
- 충전 시에는 제공된 충전 케이블이나 인증된 USB-C 케이블만 사용하세요.
- Ensure the installation surface is clean and dry before attaching the light using adhesive methods.
2. 제품 오버view
The BLS T401 LED Motion Sensor Closet Light is a versatile, rechargeable lighting solution designed for various indoor applications. It features a motion sensor for automatic illumination and a long-lasting battery.
Figure 2.1: The BLS T401 LED Motion Sensor Closet Light, a sleek silver bar with a central motion sensor and light strip.
주요 특징:
- 슈퍼 밝은 조명: 200 lumens with 6000K Clean White Glow.
- 무선 설치: No hard wiring required.
- 모션 센서: Automatically turns on when motion is detected in dark or low-light conditions.
- 충전식 배터리: Built-in 4500mAh UL certified battery for extended use.
- 다중 장착 옵션: Magnetic attachment, 3M adhesive tape, or screws.
- 3가지 모드 스위치: OFF, ON, and AUTO modes for flexible operation.
Figure 2.2: Diagram illustrating the dimensions of the BLS T401 light (15.1 inches long, 0.9 inches wide, 0.98 inches high) and its 120-degree motion detection range up to 10 feet.
3. 설정
The BLS T401 offers flexible installation options to suit various surfaces.
설치 방법:
- 자석 부착: The light has built-in strong magnets. It can be directly attached to any iron surface without additional mounting hardware.
- 접착 테이프: For non-magnetic surfaces, use the included 3M adhesive tape. Clean the desired surface thoroughly, peel off the protective film from the adhesive pads, attach them to the metal mounting brackets, and then firmly press the brackets onto the surface. Once the brackets are secure, the light can be magnetically attached to them.
- 나사 장착: For a more permanent installation, use the included screws. Mark the positions for the screws through the holes on the metal mounting brackets. Drill pilot holes if necessary, then secure the brackets with screws. Finally, attach the light magnetically to the installed brackets.
Figure 3.1: Step-by-step guide for installing the light using adhesive tape and magnetic brackets, including an example of magnetic attachment to a refrigerator and under-cabinet placement.
4. 사용 설명서
The BLS T401 features a sliding switch with three modes: OFF, ON, and AUTO.
모드 선택:
- OFF : The light remains off regardless of motion or ambient light.
- 에: The light stays continuously on.
- 자동 : In this mode, the motion sensor activates the light. The light will turn on when it senses motion in both dark and low-light environments. It stays on as long as motion is detected nearby and automatically turns off 18 seconds after motion ceases. A built-in light sensor ensures the light stays off when the ambient environment is bright to conserve battery.
모션 센서 조정:
The sensitivity of the motion sensor can be adjusted by rotating the light on its magnetic base. Adjust the angle to achieve optimal lighting and motion detection for your specific environment.
Video 4.1: An official BLS LED video demonstrating the light's features, including its battery and motion sensor functionality.
5. 충전
The BLS T401 is equipped with a 4500mAh rechargeable lithium-ion battery.
충전 프로세스:
- Locate the USB-C charging port on one end of the light.
- Connect the provided USB-C charging cable to the light and to a compatible USB power source (e.g., wall adapter, computer USB port).
- The charging indicator light will illuminate to show the charging status. Refer to the indicator light guide for specific details (usually red for charging, green for fully charged).
- A full charge can last up to 180 days in AUTO mode, based on 10 activations per day, 20 seconds each time.
Figure 5.1: Visual comparison highlighting the BLS T401's 180-day run time with its large 4500mAh rechargeable battery versus other lights with smaller batteries requiring frequent charging.
6. 유지관리
To ensure optimal performance and longevity of your BLS T401 LED Motion Sensor Closet Light, follow these maintenance guidelines:
- 청소: Wipe the light's surface with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or electronic components.
- 배터리 관리 : For best battery life, avoid completely draining the battery frequently. Recharge the light when the brightness noticeably diminishes.
- 저장: If storing the light for an extended period, charge it fully and store it in a cool, dry place. Recharge every 3-6 months to maintain battery health.
7. 문제 해결
If you encounter any issues with your BLS T401, refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 자동 모드에서는 조명이 켜지지 않습니다. | Insufficient ambient light (too bright), no motion detected, or low battery. | Ensure the environment is dark enough for AUTO mode. Check for motion within the sensor's range. Recharge the battery. |
| 조명이 너무 빨리 꺼지거나 너무 오래 켜져 있습니다. | Motion sensor sensitivity or placement. | Adjust the angle of the light on its magnetic base to optimize sensor detection. Ensure no constant motion is within range if it stays on too long. |
| 빛이 어둡거나 깜빡입니다. | 배터리가 부족합니다. | 배터리를 완전히 충전하세요. |
| 빛은 충전되지 않습니다. | 충전 케이블이나 전원에 결함이 있습니다. | Try a different USB-C cable and/or a different USB power source. |
8. 사양
| 특징 | 세부 사항 |
|---|---|
| 상표 | 블루스 |
| 모델 번호 | T401 |
| 광원 유형 | 주도의 |
| 명도 | 200루멘 |
| 색온도 | 6000 Kelvin (Clean White) |
| 배터리 용량 | 4500mAh Lithium Ion (UL Certified) |
| 전원 | 배터리 구동 |
| 제품 치수 | 15.1인치 길이 x 0.9인치 너비 x 0.98인치 높이 |
| 품목 무게 | 8 온스 |
| 재료 | 아크릴로니트릴 부타디엔 스티렌, 알루미늄 |
| 제어 방법 | Slide Switch (OFF/ON/AUTO) |
| 모션 센서 범위 | Up to 10 feet, 120° detection angle |
| 설치 유형 | Magnetic, Adhesive, Screw Mount |
| 실내/실외 사용 | 실내 |
9. 보증 및 지원
BLS는 다음을 제공합니다. One Year Warranty & Lifelong Service for this product. Should you encounter any issues or have questions regarding your BLS T401 LED Motion Sensor Closet Light, please contact customer service via email at cuscare.blscollection@gmail.com. Please provide your order ID for efficient support. The manufacturer is committed to providing worry-free service.
