제품 끝view
The ThermoPro TP19H is an advanced digital meat thermometer designed for precise temperature measurement during cooking. It features an ambidextrous backlit display, motion-sensing technology for power efficiency, and a durable waterproof design, making it suitable for various culinary applications including BBQ, grilling, smoking, frying, and candy making.
Image: The ThermoPro TP19H digital meat thermometer in bright orange, with its probe extended and digital display showing a temperature reading.
주요 특징
- 2.0-inch Auto-Rotating Backlit Display: Provides clear temperature readings in any lighting condition and is convenient for both left and right-handed users.
- 동작 감지 수면/기상 모드: Automatically turns on when the probe is opened or the device is picked up, and enters sleep mode when set down, conserving battery life.
- IP65 방수: 흐르는 물에 쉽게 세척할 수 있습니다.
- 편리한 보관: 뒷면에 자석이 있어 금속 표면에 부착할 수 있으며, 고리를 걸 수 있는 구멍이 있습니다.
- 초고속 응답 시간: Delivers temperature readings within 3-4 seconds with an accuracy of ±0.9°F (±0.5°C).
- 4.3인치 식품 등급 스테인리스 스틸 프로브: Suitable for measuring temperatures of various food types.
- 잠금 기능 : Holds the temperature reading on the display, allowing for safe view열을 피해 멀리 떨어져 있다.
- 교정 기능: Ensures long-term accuracy of the thermometer.
Image: A comparison chart highlighting the superior features of the ThermoPro TP19H, such as NSF certification, higher accuracy, motion-activated functions, auto-rotating display, larger display, and strong magnetic back.
패키지 내용
- 1 x ThermoPro TP19H Digital Meat Thermometer
- AAA 배터리 1개 (사전 장착 또는 별도 구매)
- 1 x 드라이버(배터리 교체용)
- 1 x 사용 설명서
Image: The ThermoPro TP19H thermometer displayed alongside its instruction manual and a small screwdriver, indicating tools for battery replacement.
설정 및 초기 사용
배터리 설치
- 온도계 뒷면에 있는 배터리 칸을 찾으세요.
- 포함된 드라이버를 사용하여 배터리 덮개를 엽니다.
- AAA 배터리를 올바른 극성(+/-)에 맞춰 삽입하세요.
- 배터리 커버를 교체하고 나사로 고정합니다.
켜기/끄기
- 자동 켜짐: Extend the probe from the thermometer body to automatically turn the unit on.
- 자동 끄기: Fold the probe back into the thermometer body to automatically turn the unit off.
- 모션 감지: The device will automatically wake up when picked up and enter sleep mode when set down after a period of inactivity to save battery.
Image: Illustrations demonstrating the motion-sensing ON/OFF, sleep, and wake functions of the ThermoPro TP19H thermometer, showing how extending or folding the probe, or picking up/setting down the device, controls its power state.
작동 지침
온도 측정
- Extend the probe to turn on the thermometer.
- 스테인리스 스틸 탐침 끝을 뼈나 연골을 피해 음식의 가장 두꺼운 부분에 꽂으세요.
- The temperature reading will display on the screen within 3-4 seconds.
- The display will auto-rotate for easy view어떤 각도에서든.
Image: The ThermoPro TP19H thermometer in use, demonstrating its backlit display in low light and its 180-degree auto-rotating display for ambidextrous use.
Image: The ThermoPro TP19H thermometer inserted into a cooked turkey, illustrating its accurate (±0.9°F) and fast (3-second) reading capabilities.
잠금 기능 사용
- 를 누르세요 잠그다 button to hold the current temperature reading on the display. This is useful when removing the thermometer from hot food or an oven to read the temperature safely.
- 를 누르세요 잠그다 버튼을 다시 누르면 디스플레이 잠금이 해제되고 실시간 온도 측정이 재개됩니다.
백라이트 사용
- 를 누르세요 빛 button to activate the display backlight.
- The backlight will automatically turn off after a few seconds to conserve battery.
온도 단위 선택(°C/°F)
- On the back of the thermometer, locate the small button to switch between Celsius (°C) and Fahrenheit (°F).
구경 측정
The TP19H features a calibration function to ensure long-term accuracy. If you suspect the thermometer is not reading accurately, you can recalibrate it using an ice-water bath.
- Prepare a large glass with crushed ice and fill it with water. Stir the mixture and let it sit for 3 minutes to ensure the water reaches 32°F (0°C).
- 온도계 탐침을 얼음물에 넣고, 탐침 끝이 완전히 잠기도록 하되 유리잔의 바닥이나 측면에 닿지 않도록 주의합니다.
- 측정값이 안정될 때까지 기다리세요. 32°F(0°C)가 표시되어야 합니다.
- 측정값이 32°F(0°C)가 아니면 버튼을 길게 누르십시오. 칼 button (usually located on the back or side, refer to specific button layout on device) for 3 seconds until the display flashes.
- 사용하세요 잠그다 or 빛 buttons to adjust the reading to 32°F (0°C).
- 를 누르세요 칼 button again to confirm and save the calibration.
Image: The ThermoPro TP19H thermometer probe submerged in a glass of ice water, illustrating the calibration process to ensure accurate temperature readings.
유지 보수 및 관리
- 청소: The TP19H is IP65 waterproof. Clean the probe and thermometer body with a damp cloth or rinse under running water after each use. Do not submerge the entire unit in water for extended periods.
- 저장: Fold the probe back into the unit for safe storage. The magnetic back allows it to be stored on refrigerators or other metal surfaces. A hang hole is also provided for hooks.
- 배터리 교체: Replace the AAA battery when the display dims or the unit fails to power on. Use the provided screwdriver for easy access to the battery compartment.
- 하지 마세요:
- Place the thermometer in an oven, microwave, or on a hot surface.
- Leave the plastic body exposed to extreme heat.
- Submerge the entire unit in water for prolonged periods.
- Disassemble the unit beyond battery replacement.
Image: A hand rinsing the ThermoPro TP19H thermometer under a kitchen faucet, demonstrating its IP65 waterproof feature for easy cleaning.
Image: The ThermoPro TP19H thermometer shown being stored on a refrigerator via its magnetic back and hanging from a hook, illustrating its convenient storage options.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 온도계가 켜지지 않습니다. | Battery is dead or incorrectly installed. Probe is not fully extended. | Check battery polarity and replace if necessary. Ensure probe is fully extended to activate. |
| 온도 판독값이 부정확합니다. | Probe not inserted deep enough. Thermometer needs calibration. | Insert probe into the thickest part of the food. Perform calibration using an ice-water bath. |
| 디스플레이가 어둡거나 깜빡입니다. | 배터리가 부족합니다. | AAA 배터리를 교체하십시오. |
| Display shows "LLL" or "HHH". | 온도가 측정 범위를 벗어났습니다. | Ensure the temperature being measured is within the thermometer's operating range (-58°F to 572°F / -50°C to 300°C). |
명세서
- 온도 범위: -58°F ~ 572°F(-50°C ~ 300°C)
- 정확성: ± 0.9 ° F (± 0.5 ° C)
- 응답 시간: 3~4초
- 프로브 길이: 4.3인치 (식품 등급 스테인리스 스틸)
- 표시하다: 2.0-inch Auto-Rotating Backlit LCD
- 방수 등급: IP65
- 전원: 1 x AAA 배터리(포함)
- 배터리 수명: 최대 3000시간
- 특별 기능: Motion Sensing (sleep/wake), Magnetic Back, Hang Hole, Lock Function, Calibration
- 치수: 길이는 약 7.5인치입니다.
- 무게: 77그램
보증 및 지원
For warranty information or technical support, please refer to the official ThermoPro web해당 웹사이트를 방문하거나 고객 서비스 센터에 직접 문의하십시오. 구체적인 보증 조건은 지역 및 구매일에 따라 다를 수 있습니다.
ThermoPro Official Web대지: https://buythermopro.com
