1. 제품 오버view
The Cordivari Lisa 22 is a hydronic towel warmer designed to provide warmth and dry towels efficiently. Characterized by its fresh design and innovative heating elements, this radiator is suitable for use with US standard pipes and central heating systems. It is finished with ecological epoxy powders for durability and a clean aesthetic.
이미지 1.1: 앞면 view of the Cordivari Lisa 22 Hydronic Towel Warmer, showcasing its white, straight design with multiple horizontal bars.
Image 1.2: The Cordivari Lisa 22 Towel Warmer installed in a bathroom, demonstrating its integration into a typical bathroom setting next to a toilet and tiled wall.
2. 중요한 안전 정보
Please read and understand all safety instructions before installing or operating the towel warmer. Failure to follow these instructions may result in property damage, injury, or death.
- 뜨거운 표면: The surface of the towel warmer will become hot during operation. Avoid direct contact with the hot surfaces to prevent burns. Keep children and pets away from the unit.
- 물 누출: Ensure all connections are properly sealed to prevent water leaks. Regularly inspect the unit for any signs of leakage.
- 설치: 설치는 해당 지역의 건축 및 배관 규정에 따라 자격을 갖춘 전문가가 수행해야 합니다.
- 전기 안전: If the unit includes any electrical components (e.g., for a dual energy system), ensure all electrical connections are made by a licensed electrician and comply with local electrical codes. This model is hydronic and does not require electrical connection for heating.
- Pressure and Temperature: Do not exceed the maximum operating temperature of 230 °F (110 °C) or maximum pressure of 130 PSI (9 Bar).
- 통풍: 설치 구역에 적절한 환기가 이루어지도록 하세요.
3. 패키지 내용
상자를 조심스럽게 풀고 모든 품목이 들어 있고 손상되지 않았는지 확인하세요. 품목이 없거나 손상된 경우 즉시 공급업체에 문의하세요.
- Cordivari Lisa 22 Hydronic Towel Warmer
- Thermostatic Valve Kit
- 장착 브래킷
- 에어 벤트
- 육각형 도구
- Plugs and Screws for mounting (suitable for either compact or hollow brick walls)
- 설치 설명서
Image 3.1: Components of the thermostatic valve kit, including the valve body, control knob, and connection fittings.
Image 3.2: Mounting brackets and various screws and plugs provided for secure installation of the towel warmer.
4. 설치 가이드
The Cordivari Lisa 22 towel warmer is designed for easy connection to US standard pipes and central heating systems. Professional installation is recommended.
4.1 설치 전 확인 사항
- Verify that the wall where the radiator will be installed is structurally sound and can support the weight of the unit when filled with water.
- Ensure that the pipe centers match the radiator's specifications (20 inches / 500 mm).
- Confirm that all necessary tools and safety equipment are available.
4.2 라디에이터 장착
- 마킹: Using the provided template or measurements, mark the drilling points on the wall for the mounting brackets. Ensure the marks are level and correctly spaced.
- 교련: 표시된 지점에 벽 종류에 맞는 드릴 비트를 사용하여 구멍을 뚫고 벽 플러그를 삽입하십시오.
- 브래킷 부착: Secure the mounting brackets to the wall using the provided screws. Ensure they are firmly attached.
- Positioning Radiator: Carefully lift the towel warmer and position it onto the mounted brackets. Ensure it is securely seated.
4.3 배관 연결
- 밸브 연결: Attach the thermostatic valve and return valve to the radiator's connections (n° 2 x 1/2” gas). Use appropriate sealant or PTFE tape to ensure watertight connections.
- 시스템에 연결: Connect the radiator's valves to your central heating system's supply and return pipes.
- 에어벤트: Install the air vent (n° 1 x 1/2” gas) at the top of the radiator. This allows for bleeding air from the system.
- 누출 테스트: Once all connections are made, slowly fill the heating system and check for any leaks at all connection points. Tighten as necessary.
Image 4.1: Technical drawing illustrating the dimensions and connection points of the Cordivari Lisa 22 radiator, crucial for accurate installation.
5. 사용 설명서
The Cordivari Lisa 22 Hydronic Towel Warmer operates as part of your central heating system. The thermostatic valve allows for control over the heat output.
- 온도 조절 밸브: The thermostatic valve automatically regulates the flow of hot water through the radiator to maintain a desired room temperature. Turn the knob to adjust the setting. Higher numbers typically indicate higher heat output.
- 수건 말리기: Hang towels evenly over the bars of the warmer. Do not overload the unit, as this can impede heat distribution and drying efficiency.
- 공기 누출: If the radiator is not heating evenly (cold spots), it may have air trapped inside. Use the air vent key to slowly open the air vent until water begins to escape, then close it. Perform this operation when the heating system is cold.
6. 유지관리
Regular maintenance will ensure the longevity and efficient operation of your Cordivari Lisa 22 towel warmer.
- 청소: Clean the surface of the radiator regularly with a soft, damp cloth. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the ecological epoxy powder finish.
- 검사: Periodically check all pipe connections for any signs of leaks or corrosion. Address any issues promptly.
- 시스템 압력 : Ensure your central heating system maintains the correct operating pressure as recommended by your heating system manufacturer.
- 출혈: Bleed the radiator annually, or whenever cold spots are noticed, to remove trapped air and ensure optimal heating performance.
7. 문제 해결
This section provides solutions to common issues you might encounter with your towel warmer.
- 라디에이터가 작동하지 않음:
- Check if the central heating system is operational.
- Ensure the thermostatic valve is open and set to a desired temperature.
- 라디에이터에 갇힌 공기를 빼내십시오.
- Verify that the isolation valves (if present) on the pipes leading to the radiator are fully open.
- Cold Spots on Radiator:
- This usually indicates trapped air. Bleed the radiator as described in the Operating Instructions.
- 물 누출:
- Immediately turn off the water supply to the radiator if possible.
- Identify the source of the leak (e.g., pipe connection, valve).
- Tighten connections or replace faulty components. If unsure, contact a qualified plumber.
- 낮은 열 출력:
- Ensure the thermostatic valve is set to a higher temperature.
- Check the overall pressure of your central heating system.
- Bleed the radiator for air.
8. 기술 사양
| 특징 | 사양 |
|---|---|
| 모델 | 리사 22 |
| 치수(폭 x 높이) | 24'' x 48'' (600 mm x 1200 mm) |
| Pipe Centers | 20'' (500 mm) |
| 무게 | 20파운드(8.2kg) |
| 열 출력 | 1925 BTU (700 Watt) |
| 최대 온도 | 화씨 230도(섭씨 110도) |
| 최대 압력 | 130 PSI(9바) |
| 사이 | 2 x 1/2” gas (inlet/outlet), 1 x 1/2” gas (air vent) |
| 마치다 | Standard White RAL9010, Ecological Epoxy Powders |
| 재료 | Painted Mild Steel |
| 호환성 | US Pipes and US Central Heating Systems |
Image 8.1: Detailed technical specifications table for various Lisa 22 radiator configurations, including dimensions, water content, and thermal output.
9. 보증 및 지원
Cordivari products are manufactured to high standards and are backed by a manufacturer's warranty. Specific warranty terms and conditions may vary by region and purchase date. Please refer to the warranty card included with your product or visit the official Cordivari web자세한 내용은 사이트를 참조하세요.
9.1 고객 지원
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Cordivari customer support or your authorized dealer. Have your product model number and purchase date ready when contacting support.
일반적으로 제조업체의 공식 연락처 정보를 찾을 수 있습니다. web대지: www.cordivari.it
