1. 제품 오버view
The TEAMGROUP MP33 1TB NVMe PCIe Gen3x4 M.2 2280 Internal SSD is a high-performance solid-state drive designed to enhance the speed and responsiveness of your laptop or desktop PC. Utilizing the NVMe 1.3 standard and PCIe Gen3x4 interface, it offers significantly faster data transfer rates compared to traditional SATA III SSDs. Its compact M.2 2280 form factor ensures compatibility with a wide range of modern computing platforms.
주요 특징:
- NVMe PCIe Gen3x4 High-Speed Interface: Achieves sequential read/write speeds up to 1800/1500 MB/s, reducing operating system and application loading times.
- 초고성능: Offers transfer performance up to 5 times higher than SATA III, ideal for demanding tasks like gaming, complex graphics processing, and video editing.
- M.2 2280 Specification: Supports next-generation Intel and AMD platforms, suitable for both desktop and notebook computers.
- SLC Caching Technology: Enhances computing performance and maintains snappy responsiveness.
2. 설정 및 설치
Proper installation is crucial for optimal performance and to prevent damage. Please follow these steps carefully. Refer to your motherboard's user manual for specific M.2 slot locations and procedures, as designs may vary.
M.2 SSD Installation Steps:
- Step 1: Power Off and Unplug: Before beginning, ensure your computer is completely powered off and unplugged from the power source.
- Step 2: Locate M.2 SSD Slot: Identify the M.2 SSD slot on your motherboard. Consult your motherboard's user manual for the exact location and any specific instructions regarding heat spreaders or screws.
- Step 3: Insert M.2 SSD: Carefully hold the M.2 SSD by its sides, aligning the product connector with the slot notch. Insert the SSD into the M.2 slot at a 20-degree angle. Secure the SSD by screwing it into the mounting holes on the motherboard. Ensure no other components interfere with the installation.
- Step 4: Complete Assembly & Start Up: Before powering on, double-check that no screws, parts, or foreign objects are left on the motherboard. Avoid direct contact with PCB parts during installation to prevent static electricity damage. When screwing, be careful to avoid colliding with IC parts on the motherboard.
3. 작동 원리
The TEAMGROUP MP33 SSD leverages advanced technologies to deliver its high performance:
- NVMe PCIe Gen3x4 Interface: This interface allows for a direct connection to the CPU, bypassing the slower SATA controller, which significantly reduces latency and increases bandwidth for data transfer.
- SLC Caching Technology: The SSD utilizes a portion of its TLC NAND flash memory to operate in Single-Level Cell (SLC) mode. This SLC cache acts as a high-speed buffer, accelerating write operations and improving overall responsiveness, especially during bursts of activity.
- 3D NAND TLC: The 3D NAND architecture stacks memory cells vertically, allowing for higher storage density and improved endurance compared to planar NAND. TLC (Triple-Level Cell) stores 3 bits per cell, offering a good balance of capacity, cost, and performance.
4. Maintenance and Data Integrity
To ensure the longevity and reliability of your TEAMGROUP MP33 SSD, several technologies are integrated:
- S.M.A.R.T. Monitoring Software: The SSD supports Self-Monitoring, Analysis, and Reporting Technology (S.M.A.R.T.), allowing users to monitor the drive's health, performance, and reliability attributes. This helps in predicting potential drive failures.
- TRIM 지원: TRIM command helps the operating system inform the SSD which data blocks are no longer in use and can be wiped. This prevents performance degradation over time and extends the lifespan of the NAND flash memory.
- Low-Density Parity Check (LDPC): This advanced error correction code ensures data accuracy during transmission and enhances the reliability of data access, protecting against data corruption.
- RAID 지원: The SSD supports RAID (Redundant Array of Independent Disks) configurations, which can be used to protect data in case of a drive failure, depending on the RAID level implemented.
5. 문제 해결
- Driver Installation for Older Operating Systems: Windows Operating Systems earlier than Windows 8.1 do not natively support NVMe drivers. Users will need to install the appropriate NVMe driver before installing the SSD to ensure proper functionality.
- Transmission Speed Variations: Actual transmission speeds may vary according to different hardware and software conditions (e.g., motherboard, CPU, RAM, operating system, drivers, and workload). The advertised speeds are for basic reference under optimal conditions.
- SSD가 감지되지 않음: Ensure the SSD is correctly seated in the M.2 slot and securely fastened. Check your motherboard's BIOS/UEFI settings to confirm the M.2 slot is enabled and configured correctly (e.g., NVMe mode).
6. 사양
| 특징 | 세부 사항 |
|---|---|
| 상표 | 팀그룹 |
| 시리즈 | MP33 M.2 PCIe SSD |
| 모델 번호 | TM8FP6001T0C101 |
| 디지털 저장 용량 | 1테라바이트 |
| 하드 디스크 인터페이스 | PCIe x 4 |
| 연결 기술 | NVMe PCIe Gen3x4 |
| 순차 읽기 속도 | 최대 1800MB/s |
| 순차 쓰기 속도 | 최대 1500MB/s |
| 폼 팩터 | 엠.2 2280 |
| NAND 플래시 유형 | 3D NAND TLC |
| SLC Caching | 지원됨 |
| 품목 치수(LxWxH) | 5.25 x 1.66 x 0.31 인치 |
| 품목 무게 | 0.212 온스 |
| 호환 장치 | 데스크탑, 노트북 |
7. 보증 및 지원
TEAMGROUP provides a limited warranty service for all its 'Team' brand solid-state hard drives. This warranty ensures that if the product is damaged due to natural causes from the day of purchase, customers can receive free maintenance services within the specified warranty period.
- 보증 기간: The warranty period is limited and is based on either the duration from the purchase date or the Terabytes Written (TBW) limit, whichever occurs first.
- TBW Definition: The definition and conditions of TBW are based on the JEDEC standard.
- 제품 사양: If product specifications or TBW limits have different versions, the warranty will follow the version applicable at the time of purchase.
- 수정 사항: TEAMGROUP reserves the right to modify product specifications without prior notice.
- 신뢰할 수 있는 서비스: TEAMGROUP is committed to providing trustworthy and reliable service to its customers.
