1. 제품 오버view
The Falcon SP2 3.3 Fast Adjust Piggyback Shocks are designed to enhance the performance and ride quality of JLU Wrangler Unlimited (4-door) vehicles with a 2-4.5 inch lift. These shocks feature advanced adjustability for various driving conditions, including on-road comfort and off-road stability.
Key features include a Fast Adjust Knob with three compression settings, an eight-position Micro Adjust Dial for fine-tuning, and SP2 Mode Adjust for Soft or Performance settings that tune both compression and rebound.
그림 1: Falcon SP2 3.3 Fast Adjust Piggyback Shocks. This image displays four shock absorbers, each featuring a main body, a piggyback reservoir, and red adjustment knobs. The shocks are designed for vehicle suspension systems.
2. 안전 정보
Always ensure the vehicle is securely supported on jack stands or a lift before beginning any installation. Wear appropriate personal protective equipment, including safety glasses and gloves. It is recommended that installation be performed by a qualified professional.
제안 65 경고: 이 제품에는 캘리포니아 주에서 암 및 선천적 기형 또는 기타 생식 장애를 유발하는 것으로 알려진 화학 물질이 포함되어있을 수 있습니다.
3. 포함된 구성품
설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요. 패키지에는 다음이 포함되어야 합니다.
- 4 Falcon vehicle-specific shocks (SP2 3.3 Fast Adjust Piggyback Shocks)
- All necessary hardware for installation
- 설치 지침(이 매뉴얼)
4. 설정 및 설치
Installation time is approximately 1.5 hours. This estimate may vary based on experience and available tools.
4.1 설치 전 확인 사항
- 차량이 평평한 곳에 있고 제대로 고정되어 있는지 확인하십시오.
- Confirm all included components match the parts list.
- Review 시작하기 전에 사용 설명서 전체를 읽으십시오.
4.2 Bump Stop Configuration
Proper bump stop configuration is crucial and depends on the shock absorber's collapsed length, tire size, and fender type. Refer to specific instructions provided with your vehicle's lift kit or consult a professional for correct configuration.
Depending on your setup, a 2-inch Bump Stop Strike Pad Extension Kit (Part # 1959500) and/or 0.5-inch Bump Stop Strike Pad Shim Kit(s) (Part # 1959300) may be required.
4.3 일반 설치 단계(요약)
- 차량을 안전하게 들어올리고 지지하세요.
- Remove existing shock absorbers.
- Install the new Falcon SP2 3.3 Fast Adjust Piggyback Shocks, ensuring correct orientation (front shock features unique piggyback design with horizontal reservoir for clearance).
- Secure all mounting hardware to manufacturer specifications.
- Verify proper clearance for all suspension components throughout the full range of travel.
- 차량을 내리고 최종 점검을 실시하십시오.
5. Operating and Adjustment Instructions
The Falcon SP2 3.3 Fast Adjust Piggyback Shocks offer multiple adjustment options to fine-tune your vehicle's ride characteristics.
5.1 Fast Adjust Knob
The Fast Adjust Knob provides three distinct compression settings for quick, large damp조정 사항:
- 부드러운: 최대한의 편안함을 위해.
- 중간: A balanced setting for general driving.
- 단단한: For increased stability and control.
5.2 Micro Adjust Dial
The middle setting of the Fast Adjust Knob incorporates an eight-position Micro Adjust Dial. This dial allows for more precise tuning between the Soft and Firm settings, enabling fine adjustments to suit specific preferences or terrain.
5.3 SP2 Mode Adjust
The SP2 Mode Adjust feature allows you to switch between Soft and Performance modes, tuning both compression and rebound characteristics.
- 조정: Twist the dial counterclockwise for Soft mode and clockwise for Performance mode. This adjustment is only possible when the shock is fully extended.
- 소프트 모드: Recommended for rough roads, trails, embedded rocks, expansion joints, and/or winter temperatures. During normal driving, this mode allows a partial bypass of the main piston for less restriction and a softer ride. During aggressive driving, it retains performance tuning for optimal handling.
- 성능 모드: Recommended for maximum highway and/or off-road handling, stability, and control with minimal head toss.
The operation of the Fast Adjust Knob and Micro Position Knob remains unaffected by the SP2 Mode Adjust setting.
6. 유지관리
To ensure the longevity and optimal performance of your Falcon SP2 3.3 Fast Adjust Piggyback Shocks, regular inspection and maintenance are recommended.
- 점검: Periodically check for any signs of damage, leaks, or wear on the shock bodies, shafts, and mounting points. Ensure all hardware is securely tightened.
- 청소: Keep the shocks clean from dirt, mud, and debris, especially around the shaft and seals, to prevent premature wear.
- 재료: The shocks feature 6061-T6 aluminum alloy bodies for wear resistance and heat dissipation, and 3/4-inch induction hardened chrome-plated shafts to resist rock damage and corrosion.
- 체액: These shocks utilize Red Line full synthetic shock oil with a high viscosity index for consistent performance across various temperatures.
- 서비스 가능성 : Falcon shocks are designed to be serviceable and rebuildable. For factory servicing or rebuilding, contact Falcon customer support.
7. 문제 해결
If you experience issues with your Falcon SP2 3.3 Fast Adjust Piggyback Shocks, consider the following:
- 특이한 소음: Check all mounting hardware for proper torque. Inspect for any contact between the shock body and other vehicle components.
- 승차감 불량: Verify that the Fast Adjust Knob, Micro Adjust Dial, and SP2 Mode Adjust settings are appropriate for your driving conditions and preferences. Ensure bump stop configuration is correct for your lift and tire size.
- Leaking Shocks: A small amount of oil residue is normal. However, significant oil leakage indicates a seal failure. Contact Falcon customer support for assistance.
- 조정 문제: Ensure the shock is fully extended when attempting to adjust the SP2 Mode Adjust.
For persistent issues, it is recommended to consult a certified automotive technician or contact Falcon customer support.
8. 사양
| 특징 | 세부 사항 |
|---|---|
| 상표 | 매 |
| 모델 | JLU 4-Door: Falcon SP2 3.3 Fast Adjust Piggyback Shocks (2-4.5” Lift) - All 4 |
| 품목 모델 번호 | 11-02-33-400-200 |
| 제조업체 부품 번호 | 11-02-33-400-200 |
| ASIN | B07WW1448L |
| 한국어: | 843885049975 |
| 차량 서비스 유형 | Jeep Wrangler (JLU 4-Door) |
| Lift Compatibility | 2-4.5 인치 |
| 자동차 부품 위치 | Rear (and Front, as it's a set of 4) |
| 스타일 | Compression, Piggyback |
| 재료 | 6061-T6 알루미늄 합금 |
| 외부 마감 | 가공된 |
| 품목 무게 | 46.3파운드(전체 패키지) |
| 제품 치수 | 37 x 27.5 x 10인치(패키지) |
| Shock Body Diameter | 2.25인치 |
| 샤프트 직경 | 3/4 인치 |
| Damp잉 테크놀로지 | Volume Optimized Damping (VOD), Digressive linear piston and base valve technology |
| 오일 종류 | Red Line full synthetic shock oil |
| 부식 저항성 | 1,000-hour salt spray test on hardware |
9. 보증 및 지원
Falcon Performance Shocks are designed, engineered, and assembled in-house from domestic and globally sourced components.
이 제품에는 다음이 포함되어 있습니다. 3년 보증. For warranty claims, technical support, or service inquiries, please contact Falcon customer service. Keep your proof of purchase for warranty validation.
