Audiolab 6000N

Audiolab 6000N Play 무선 스트리밍 플레이어 사용 설명서

Model: 6000N Play

1. 서론

The Audiolab 6000N Play is a wireless audio streaming player designed to integrate high-resolution music streaming into your home audio system. It utilizes DTS Play-Fi technology, allowing for seamless streaming over your wireless network and supporting multi-room audio configurations. This device enables streaming from various sources, including smartphones, tablets, PCs, and Network Attached Storage (NAS) drives.

2. 제품 오버view

2.1 주요 특징

  • Wireless audio streaming via DTS Play-Fi.
  • High-resolution audio support up to 192kHz/24bit.
  • Multi-room audio capability.
  • Integrated Digital-to-Analog Converter (DAC).
  • Compatibility with various streaming services and local network sources.

2.2 전면 패널 컨트롤

The front panel of the Audiolab 6000N Play features essential controls for basic operation.

Audiolab 6000N Play Front View

그림 1: 앞쪽 view of the Audiolab 6000N Play. This image displays the sleek black chassis with the "6000N Play" branding on the left, six preset buttons (1-6) in the center, and the power button on the right, along with the "audiolab" logo.

  • 전원 버튼: Located on the right side, used to turn the unit on or off.
  • 사전 설정 버튼(1-6): Allow for quick access to pre-saved radio stations or playlists.

2.3 후면 패널 연결

The rear panel provides all necessary input and output connections for integrating the 6000N Play into your audio system.

Audiolab 6000N Play Angled View

그림 2: 각진 view of the Audiolab 6000N Play, showing the front panel and a glimpse of the side. This perspective highlights the compact design and the arrangement of the preset and power buttons.

  • Analog Outputs (RCA): 연결하려면 amp리파이어 또는 프리-amp리퍼.
  • Digital Outputs (Coaxial, Optical): For connecting to an external DAC or AV receiver.
  • 이더넷 포트 : 유선 네트워크 연결의 경우.
  • Wi-Fi 안테나 커넥터: 무선 네트워크 연결을 위해.
  • 전원 입력: 전원 케이블을 연결합니다.

3. 설정

3.1 포장 풀기 및 배치

Carefully remove the 6000N Play from its packaging. Place the unit on a stable, level surface away from direct heat sources and excessive moisture. Ensure adequate ventilation around the unit.

3.2 오디오 시스템에 연결하기

  1. 아날로그 연결: Connect the RCA analog outputs of the 6000N Play to an available analog input on your amp리파이어 또는 프리-amp고품질 RCA 케이블을 사용하여 리파이어를 연결합니다.
  2. Digital Connection (Optional): If using an external DAC or AV receiver, connect the Coaxial or Optical digital output of the 6000N Play to the corresponding digital input on your external device.

3.3 네트워크 연결

The 6000N Play requires a network connection for streaming.

  • 유선 연결: Connect an Ethernet cable from your router or network switch to the Ethernet port on the rear panel of the 6000N Play.
  • 무선 연결: Attach the supplied Wi-Fi antenna to the connector on the rear panel. The wireless setup will be completed via the DTS Play-Fi app.

3.4 전원 연결

Connect the supplied power cable to the power input on the rear panel of the 6000N Play, then plug the other end into a suitable AC power outlet (100V—120V~50/60Hz).

4. 사용 설명서

4.1 전원 켜기/끄기

Press the power button on the front panel to turn the unit on or off. The unit will enter standby mode when powered off.

4.2 DTS Play-Fi App Installation

To control the 6000N Play and access streaming services, you must install the DTS Play-Fi app on your smartphone, tablet, or PC.

  1. Download the "DTS Play-Fi" app from your device's app store (Apple App Store, Google Play Store, Amazon Appstore, or Windows Store).
  2. Launch the app and follow the on-screen instructions to set up your Audiolab 6000N Play on your network. This includes connecting to Wi-Fi if you chose a wireless setup.

4.3 스트리밍 음악

Once the 6000N Play is connected to your network and configured with the Play-Fi app:

  • Open the DTS Play-Fi app.
  • Select your desired music source (e.g., Amazon Music, Deezer, Spotify, or local media server).
  • Choose the Audiolab 6000N Play as the playback device.
  • Begin playback.

4.4 사전 설정 사용

The six preset buttons on the front panel can be configured via the Play-Fi app to quickly access your favorite internet radio stations or playlists.

  1. In the DTS Play-Fi app, navigate to the desired content you wish to save as a preset.
  2. Look for an option to "Save as Preset" or similar within the app interface.
  3. Assign it to one of the six available preset numbers.
  4. Once saved, pressing the corresponding preset button on the 6000N Play's front panel will initiate playback of the saved content.

5. 유지관리

5.1 청소

To clean the unit, disconnect it from the power supply. Use a soft, dry, lint-free cloth to wipe the surfaces. Avoid using abrasive cleaners, solvents, or chemical sprays, as these can damage the finish.

5.2 소프트웨어 업데이트

Periodically check the DTS Play-Fi app or the Audiolab website for firmware updates. Updates can improve performance, add new features, or resolve issues. Follow the instructions provided by the app or website for performing updates.

6. 문제 해결

If you encounter issues with your Audiolab 6000N Play, refer to the following common troubleshooting steps:

  • 전원 없음:
    • 전원 케이블이 본체와 전원 콘센트에 제대로 연결되어 있는지 확인하십시오.
    • 전원 콘센트가 작동하는지 확인하세요.
  • 소리 없음:
    • Check all audio cable connections between the 6000N Play and your amp리시버/리시버.
    • 입력란에 올바른 항목이 선택되었는지 확인하십시오. amp리시버/리시버.
    • Verify the volume level on both the 6000N Play (via app) and your amp리시버/리시버.
    • Confirm that music is actively playing in the DTS Play-Fi app.
  • 네트워크 연결 문제:
    • For Wi-Fi, ensure the antenna is securely attached.
    • Restart your router and the 6000N Play.
    • Wi-Fi 네트워크가 활성화되어 있고 범위 내에 있는지 확인하세요.
    • 유선 연결을 사용하는 경우 이더넷 케이블을 확인하십시오.
    • Re-run the network setup process in the DTS Play-Fi app.
  • DTS Play-Fi App Problems:
    • 앱이 최신 버전으로 업데이트되었는지 확인하세요.
    • 앱이나 모바일 기기를 다시 시작하세요.
    • 문제가 지속되면 앱을 다시 설치해 보세요.

If these steps do not resolve the issue, please contact Audiolab customer support for further assistance.

7. 사양

특징사양
Digital Output Level500 +/- 50mVpp
최대 해상도192kHz/24비트
총 고조파 왜곡률(THD)<0.003% (1kHz @0dBFS BW=20-20kHz)
전력 요구 사항100V—120V~50/60Hz
순중량10.78파운드(4.89kg)
제품 치수(W x D x H)17.8 x 12.52 x 2.62인치(45.2 x 31.8 x 6.65cm)
연결 기술와이파이, 이더넷
지원되는 인터넷 서비스Amazon Music, Deezer, Spotify (via DTS Play-Fi app)
커넥터 유형RCA (Analog Out), Coaxial (Digital Out), Optical (Digital Out)

8. 보증 및 지원

Audiolab products are designed and manufactured to the highest quality standards. For detailed warranty information, please refer to the warranty card included with your product or visit the official Audiolab website. For technical support, product registration, or service inquiries, please contact your local Audiolab dealer or distributor, or visit the Audiolab support page online.

공식 오디오랩 Web대지: www.audiolab.co.uk

관련 문서 - 6000N

사전view Audiolab 6000N Play 무선 오디오 스트리밍 플레이어 사용 설명서
Audiolab 6000N Play 무선 오디오 스트리밍 플레이어의 종합 사용자 설명서입니다. 설정, DTS Play-Fi 기술, 앱 연동, 연결, 보증 및 사양에 대한 내용을 다룹니다.
사전view Audiolab 6000N Play 사용 설명서: 설정, 기능 및 사양
Audiolab 6000N Play 무선 오디오 스트리밍 플레이어의 종합적인 사용 설명서입니다. 설정, DTS Play-Fi 기술, 앱 연동, 연결, 사양 및 보증 정보를 다룹니다.
사전view Audiolab Omnia 사용자 설명서: 통합 Amp앰프 및 네트워크 스테레오 수신기
프리미엄 통합형 오디오 시스템, Audiolab Omnia를 만나보세요. amp앰프와 네트워크 스테레오 수신기를 결합한 제품입니다. 이 종합적인 사용 설명서는 CD 재생, DTS Play-Fi 무선 스트리밍, MQA 디코딩, 블루투스 연결, 고품질 DAC 등 고급 기능을 자세히 안내합니다. 이 다재다능한 하이파이 시스템을 설치, 작동 및 최적화하여 최고의 오디오 경험을 즐기는 방법을 알아보세요.
사전view Audiolab 9000N 네트워크 플레이어 사용 설명서
Audiolab 9000N 네트워크 플레이어의 종합적인 사용 설명서로, 기능, 연결, 작동, 네트워크 설정, 재생 기능, 보증 및 사양을 자세히 설명합니다. MQA, Roon Ready 및 다양한 스트리밍 서비스에 대한 정보도 포함되어 있습니다.
사전view Audiolab 9000N 앱 사용 설명서
audiolab 9000N 앱의 사용자 가이드로, 찾아보기, 재생 목록, 지금 재생 패널을 탐색하는 방법, 트랙을 추가하는 방법, 검색하는 방법, UPnP 탐색을 사용하는 방법에 대한 자세한 설명이 나와 있습니다.
사전view 오디오랩 6000A 플레이 통합 Ampliifier 사용 설명서
고음질 통합형 Audiolab 6000A Play를 만나보세요. ampDTS Play-Fi 무선 스트리밍 기능을 갖춘 리파이어입니다. 이 설명서는 최적의 오디오 경험을 위한 설정, 연결, 시스템 작동 및 고급 기능 사용 방법을 안내합니다.