유로타임 쿼츠 알람 시계 모델 27000-03 사용 설명서

소개

The Eurotime Quartz Alarm Clock Model 27000-03 is designed for ease of use and features a silent, non-ticking quartz movement. It includes a crescendo alarm, snooze function, and a white backlight for nighttime visibility. This manual provides detailed instructions to help you get the most out of your alarm clock.

그림 1: 앞쪽 view of the Eurotime Quartz Alarm Clock. This image displays the clock's face with yellow numbers, black hour and minute hands, and a silver second hand, all set within a white plastic casing.

설정

1. 배터리 설치

Your Eurotime alarm clock requires 1 AA 1.5V alkaline battery (not included). For optimal performance and to avoid common functional errors, ensure a new, full alkaline battery is used. Non-alkaline batteries are not suitable for this model.

1. 시계 뒷면에 있는 배터리실 덮개를 엽니다.
2. Insert one AA 1.5V alkaline battery, ensuring the polarity (+ and -) matches the indicators inside the compartment.
3. 배터리 덮개를 단단히 닫으세요.

2. Setting the Time and Alarm

Use the adjustment knobs located on the back of the clock to set the current time and your desired alarm time.

1. 시간 설정 노브: Rotate this knob to adjust the hour and minute hands to the current time.
2. 알람 설정 노브: 이 다이얼을 돌려 알람 바늘을 원하는 기상 시간으로 설정하세요.

그림 2: 뒤쪽에 view of the alarm clock. This image highlights the battery compartment, the time setting knob, and the alarm setting knob, essential for initial setup.

작동 지침

1. Turning the Alarm ON/OFF

A switch on the side of the clock controls the alarm function.

1. To activate the alarm, slide the switch to the ON 위치.
2. 알람을 비활성화하려면 스위치를 슬라이드하세요. 끄다 위치.

그림 3: 옆 view of the alarm clock. This image clearly shows the ON/OFF switch for the alarm function.

2. 스누즈 및 조명 기능

The button located on the top of the clock serves two functions:

• 빛: Press the button to illuminate the clock face with a white backlight for easy viewing in the dark. The light will stay on as long as the button is pressed.
• 다시 알림 : When the alarm is sounding, press this button to temporarily silence the alarm. The alarm will sound again after approximately 5 minutes.

3. 크레센도 알람

The alarm features a crescendo (ascending) sound, meaning it starts softly and gradually increases in volume to gently wake you up.

유지

청소

To clean your alarm clock, gently wipe the casing and plastic lens with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish.

배터리 교체

If the second hand stops moving or the alarm function becomes unreliable, it is an indication that the battery needs to be replaced. Follow the battery installation steps outlined in the Setup section to replace the battery.

문제 해결

• Clock not working or alarm not sounding:
  The most common cause for functional errors is an incorrect or depleted battery. Ensure you are using a new, full 1.5V AA alkaline battery.
• Alarm sounds immediately after setting:
  Analog alarm clocks do not distinguish between AM and PM. If you set the alarm within approximately one hour of the current time, it may trigger immediately. To ensure the alarm sounds at the desired time (e.g., 7:00 AM), set it outside this one-hour window (e.g., set it at 9:00 PM for a 7:00 AM alarm).
• Second hand stops or clock runs intermittently:
  This indicates that the battery power is low and the battery needs to be replaced.

명세서

보증 및 지원

For any further questions or issues with your Eurotime Quartz Alarm Clock, please contact the manufacturer or your retailer for assistance. Please refer to your purchase documentation for specific warranty information.