소개
This manual provides essential information for the setup, operation, and maintenance of your Klipsch Synergy Black Label F-300 Floorstanding Speaker. Designed with Klipsch Tractrix Horn technology, an aluminum diaphragm compression driver, and dual 8-inch copper IMG woofers, this speaker delivers room-filling sound for movies, music, and gaming. Please read these instructions carefully to ensure optimal performance and longevity of your speaker.
설정
1. 풀기
Carefully remove the speaker from its packaging. Inspect for any signs of damage. Retain packaging for future transport or storage.
2. 배치
For optimal sound performance, place your F-300 speakers 6 to 15 feet (approximately 1.8 to 4.5 meters) apart. Ensure they are positioned at least 24 inches (approximately 60 cm) from both the back and side walls. This spacing helps to create a balanced soundstage and prevent excessive bass buildup.
Figure 1: Klipsch Synergy Black Label F-300 Floorstanding Speaker, showcasing its tall, black cabinet and copper-colored woofers.
3. 연결
The F-300 speaker must be connected to an AV receiver or amplifier for both audio signal and power. Speaker wire is not included and must be purchased separately. Ensure proper polarity (+ to + and - to -) when connecting the speaker to your amplifier to avoid phase issues that can degrade sound quality.
Figure 2: Detail of the dual 8-inch spun copper Injection Molded Graphite (IMG) woofers, designed for tight, musical bass reproduction.
스피커 작동
Once properly set up and connected to your audio system, the Klipsch F-300 is ready to deliver high-fidelity sound. These speakers are designed to fill large rooms with lifelike music and film sound reproduction, offering accurate, non-fatiguing sound for hours of listening pleasure.
음향 특성
- Dynamic Tweeter: Features a 1-inch aluminum diaphragm compression driver with Klipsch Tractrix Horn technology for crisp, clear high frequencies and wide dispersion.
- High-Output Woofers: Dual 8-inch copper IMG woofers provide powerful, deep bass and rich mid-range.
- 능률: Highly efficient design produces more output using less energy, allowing for louder playback with less distortion.
Figure 3: The aluminum diaphragm compression driver (tweeter) integrated into the Tractrix Horn, responsible for producing crystal-clear high frequencies.
유지
To maintain the aesthetic and acoustic performance of your Klipsch F-300 speakers, follow these simple maintenance guidelines:
- 청소: Use a soft, dry cloth to gently wipe the cabinet surfaces. Avoid abrasive cleaners or solvents, which can damage the finish.
- 그릴 관리: The speaker features a magnetic grille. It can be easily removed for cleaning or for a different aesthetic preference. Handle the grille gently to prevent damage.
- 가루 살포: Regularly dust the speaker, especially the tweeter and woofer cones if the grille is removed, using a soft brush or microfiber cloth.
- 환경 조건: Avoid placing the speaker in direct sunlight, near heat sources, or in areas with high humidity to prevent material degradation.
Figure 4: The F-300 speaker featuring its contemporary black ash vinyl finish, designed to complement various home decors.
문제 해결
If you encounter any issues with your Klipsch F-300 speaker, please refer to the following common troubleshooting steps:
- 소리 없음:
- Ensure the speaker is correctly connected to the amplifier/receiver with proper polarity.
- 확인하다 amp수신기의 전원이 켜져 있고 올바른 입력 소스가 선택되어 있습니다.
- 모든 케이블 연결 부위를 점검하여 느슨함이나 손상이 없는지 확인하세요.
- 왜곡된 소리:
- 볼륨 레벨을 줄이세요 amp리시버/리시버.
- Check speaker wire connections for any frayed strands that might be shorting.
- Ensure the speaker is not overdriven beyond its recommended power handling.
- Weak or Missing Bass:
- Confirm speaker polarity is correct (+ to + and - to -). Incorrect polarity can cause bass cancellation.
- Adjust bass settings on your amp리시버/리시버.
- Review speaker placement relative to walls and corners; repositioning can significantly impact bass response.
- 불규칙적인 소리tage:
- Ensure speakers are equidistant from the primary listening position.
- Check that both speakers are connected and functioning correctly.
For advanced troubleshooting or issues not covered here, consult your AV receiver/amp앰프 사용 설명서를 참조하거나 클립쉬 고객 지원팀에 문의하십시오.
명세서
| 특징 | 사양 |
|---|---|
| 모델명 | Klipsch Synergy F-300 |
| 스피커 유형 | 층 서 |
| 우퍼 직경 | 8인치(듀얼) |
| 트위터 직경 | 2.54센티미터(1인치) |
| 스피커 최대 출력 전력 | 600 와트 |
| 임피던스 | 8옴 |
| 주파수 응답 | 20 Hz (Lower limit, full range not specified) |
| 제품 크기(D x W x H) | 22.25인치 깊이 x 14.5인치 너비 x 47.25인치 높이 |
| 품목 무게 | 60 파운드 |
| 색상 | 검은색 |
| 재료 | Aluminum (for tweeter diaphragm) |
| 연결 기술 | 열광한 |
| 포함된 구성 요소 | Speaker, Power Cord (external wiring not included) |
보증 및 지원
Your Klipsch Synergy Black Label F-300 Floorstanding Speaker comes with a 전체 보증. For detailed information regarding warranty terms, conditions, and how to obtain service, please refer to the warranty card included with your product or visit the official Klipsch website. For technical support or further assistance, please contact Klipsch customer service.
