소개
Thank you for choosing the Neoteck Multimeter Carrying Case. This protective case is designed to safely store and transport your digital multimeter and its accessories. Featuring a durable exterior and a customizable foam interior, it offers excellent protection against impacts, scratches, and splashes. This manual provides detailed instructions on how to set up and use your carrying case effectively.
제품 특징
- 폭넓은 호환성: Designed to fit various digital multimeters, including Fluke 117/115/116/114/113 87V 88V F15B+ F17B+ F18B+, F117C/F17B+/F115C, and many models from AstroAI, Crenova, Etekcity, KAIWEETS, INNOVA, Klein, and Tacklife.
- Customizable Foam Insert: The interior features removable foam layers, allowing you to create a custom-fit compartment for your specific multimeter model and accessories.
- Mesh Storage Pocket: A secondary mesh pocket is integrated into the lid for convenient storage of test leads, batteries, temperature probes, and other small tools.
- 내구성 있는 구조: Constructed from high-density EVA, nylon, and PU materials, providing crush-resistant, shockproof, and water-resistant protection.
- 컴팩트한 크기:
- Exterior Dimensions: 22.9 x 14 x 7.9 cm (9.0 x 5.5 x 3.1 inches)
- Interior Dimensions: 19.8 x 11.4 x 6.3 cm (7.8 x 4.5 x 2.5 inches)
Image: Key features of the Neoteck Multimeter Carrying Case, highlighting the smooth zipper, soft interior lining, and waterproof nylon exterior.
Setup: Customizing the Foam Insert
The Neoteck Multimeter Carrying Case features a unique DIY foam insert that allows you to create a perfect fit for your specific multimeter. Follow these steps to customize the interior:
- 멀티미터를 점검해 보세요: Place your multimeter on the foam insert to determine the required shape and depth.
- Identify Foam Layers: The foam insert consists of pre-cut layers. Carefully identify which layers need to be removed to accommodate your device.
- 폼 부분을 제거하세요: Gently peel or cut out the foam sections corresponding to the shape of your multimeter. Start with the top layers and work downwards until your device fits snugly without excessive pressure.
- 테스트 적합성: Place your multimeter into the customized foam. Ensure it is secure and does not move excessively when the case is closed. Adjust by removing more foam if necessary.
Image: Illustration of the DIY sponge cutouts, demonstrating how to remove sections to fit your multimeter.
이미지: 전amples showing how different multimeters (Fluke 115, 117, 15B+, 17B+, 87V) fit into the case after removing specific foam layers.
작동 지침
- 멀티미터를 삽입하십시오: After customizing the foam, carefully place your digital multimeter into the main compartment.
- 매장 액세서리: Utilize the mesh pocket in the lid to store smaller accessories such as test leads, probes, and spare batteries.
- 안전하게 닫기: Ensure the zipper is fully closed to provide maximum protection for your device.
- 수송: Use the integrated handle for easy and secure transportation of your multimeter.
Image: The open carrying case, illustrating the main compartment with foam and the mesh pocket in the lid for accessories.
유지
- 청소: 케이스 외부를 물로 닦아주세요amp 필요하면 천과 순한 비누를 사용하세요. 독한 화학 약품은 사용하지 마세요.
- 건조: Allow the case to air dry completely before storing any electronic devices inside.
- 폼 관리: The foam insert can be gently cleaned with a soft, dry brush to remove dust or debris.
- 저장: 사용하지 않을 때는 직사광선과 극한의 온도를 피해 시원하고 건조한 곳에 보관하세요.
Image: The case being splashed with water, illustrating its water-resistant properties due to EVA and 1680D material construction.
문제 해결
- Multimeter does not fit:
- Ensure you have removed enough foam layers from the customizable insert. The foam is designed to be removed incrementally to achieve a snug fit. Refer to the "Setup" section for detailed instructions on customizing the foam.
- Case feels too tight or too loose:
- If too tight, remove additional foam sections. If too loose, consider adding back some removed foam pieces or using additional padding (not included) to secure your device. The goal is a snug fit that prevents movement during transport.
명세서
| 특징 | 세부 사항 |
|---|---|
| 제조업체 | 네오텍 |
| 모델 참조 | 1 (ASIN: B07VMQ6RZC) |
| 외부 치수(길이 x 너비 x 높이) | 22.86 x 19.81 x 7.87cm(9.0 x 7.8 x 3.1인치) |
| 내부 치수(길이 x 너비 x 높이) | 19.8 x 11.4 x 6.3cm(7.8 x 4.5 x 2.5인치) |
| 무게 | 200그램(0.44파운드) |
| 색상 | 검은색 |
| 재료 | EVA, Nylon, PU |
| 폐쇄 유형 | 지퍼 |
| 스타일 | 콤팩트 |
보증 및 지원
Information regarding specific warranty terms and conditions for this product was not available in the provided data. For warranty claims, technical support, or any product-related inquiries, please contact Neoteck customer service directly through their official web제품을 구매한 사이트 또는 소매업체.
You can visit the Neoteck store for more information: 네오텍 스토어
