ONKRON G120-BLK 싱글 모니터 벽걸이 마운트 사용 설명서
Model: G120-BLK
소개
This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your ONKRON G120-BLK Single Monitor Wall Mount. Please read this manual thoroughly before installation and retain it for future reference.
Image: The ONKRON G120-BLK Single Monitor Wall Mount, a black articulating arm designed for wall mounting.
안전 정보
WARNING: Improper installation or use of this product may result in serious injury or damage. If you do not understand these instructions or have doubts about the safety of the installation, please contact a qualified installer or ONKRON customer support.
- 설치 표면이 마운트와 모니터의 총 무게를 안전하게 지탱할 수 있는지 확인하십시오.
- 최대 중량 용량은 17.6파운드(8kg)를 초과하지 마십시오.
- 이 거치대는 13인치에서 34인치 사이의 모니터에 맞게 설계되었습니다.
- Always use the provided hardware. If any parts are missing or defective, contact ONKRON for replacement.
- Exercise caution when handling the gas spring mechanism. The spring is under tension and can cause injury if not handled correctly. Do not remove plastic covers over the main poles as they are for protection.
- 설치하는 동안 어린이와 애완동물이 접근하지 못하도록 하세요.
패키지 내용
설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.
Image: All components included in the ONKRON G120-BLK package, including the mount, various screws, washers, wall anchors, and an Allen key.
- Monitor Wall Mount Assembly
- VESA 플레이트
- 월 플레이트
- Mounting Hardware (screws, anchors, washers for various VESA sizes)
- 앨런 키(6mm)
- 사용 설명서
설정 및 설치
Follow these steps carefully for a secure installation. It is recommended to have a second person assist during monitor attachment.
설치 비디오 가이드
Video: An official ONKRON instruction video demonstrating the installation process for the G120-B monitor mount.
1단계: 드릴 구멍 표시
- Determine the desired mounting location on your wall. Ensure it is a solid surface (e.g., wood stud, concrete) capable of supporting the weight.
- Hold the wall plate against the wall at the desired height and use a pencil to mark the drill hole locations.
Image: The ONKRON G120-BLK monitor mount securely installed on a brick wall, demonstrating a typical mounting scenario.
2단계: 마운트 설치
- Drill pilot holes at the marked locations. The drill bit size will depend on your wall material and the anchors used.
- 적절한 나사와 앵커를 사용하여 벽면 플레이트를 벽에 고정하세요. 벽면 플레이트가 단단히 부착되고 수평이 맞는지 확인하세요.
Step 3: Attaching the Monitor to the Mount
- Attach the VESA plate to the back of your monitor using the correct screws (M4 or M6) that fit your monitor's VESA pattern (75x75mm or 100x100mm). Ensure the screws are tightened securely but do not overtighten.
- Carefully lift the monitor and slide the VESA plate onto the arm's mounting head. Ensure it clicks into place or is secured with the provided locking mechanism.
Image: Diagram illustrating VESA 75x75mm and 100x100mm mounting patterns, compatible screen diagonal (13"-34"), and load capacity (2.2-17.6 lbs).
Step 4: Adjusting for Monitor Weight (Gas Spring Tension)
The gas spring tension must be adjusted after the monitor is attached to ensure it holds its position. If the monitor sags or springs up, adjust the tension.
- Locate the gas spring adjustment screw on the arm.
- 제공된 육각 렌치를 사용하여 나사를 돌리십시오.
- 회전하다 반 시계 방향 for lighter screens (to reduce tension).
- 회전하다 시계 방향으로 for heavier screens (to increase tension).
- Adjust gradually until the monitor stays in the desired vertical position when released.
Image: Close-up of the gas spring adjustment point on the monitor arm, showing the Allen key inserted and directional arrows for adjusting tension for lighter or heavier screens.
Operating the Monitor Mount
The ONKRON G120-BLK offers a range of adjustments for optimal view편안함을.
- 높이 조정: The arm allows for 11 inches (28 cm) of vertical height adjustment. Gently push or pull the monitor to the desired height.
- 확장/수축: The arm can extend from 3.5 inches (8.9 cm) to 13.7 inches (34.8 cm) from the wall.
- 경사: Adjust the monitor tilt from +90° to -45° to reduce glare and find your preferred view잉 각도.
- 받침: Swivel the monitor 180° left or right.
- 회전: 모니터를 360° 회전하여 가로 또는 세로 방향으로 사용할 수 있습니다.
Image: Four panels demonstrating the full motion capabilities of the mount: 180° swivel, 360° rotation, +90° to -45° tilt, and 11 inches of height adjustment.
케이블 관리
Utilize the integrated cable management system to keep your workspace tidy.
- Route monitor cables through the channels on the underside of the arm.
- Secure the cables using the provided clips or covers to maintain a clean appearance.
이미지: 클로즈업 view of the monitor arm showing a cable neatly routed through the integrated cable management channel.
유지
Regular maintenance ensures the longevity and optimal performance of your monitor mount.
- 청소: 부드러운 천으로 마운트를 닦아주세요.amp 천으로 닦으세요. 연마성 세제나 용제는 사용하지 마세요.
- 정기 점검: 모든 나사와 연결부가 단단히 조여져 있는지 정기적으로 점검하세요. 필요하면 다시 조이세요.
- 가스 스프링 조정: If your monitor's weight changes or if the arm no longer holds its position, re-adjust the gas spring tension as described in the Setup section.
문제 해결
일반적인 문제에 대한 해결책은 이 섹션을 참조하세요.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 모니터가 처지거나 원하는 높이에 고정되지 않습니다. | 모니터 무게에 비해 가스 스프링 장력이 너무 낮습니다. | Increase gas spring tension by turning the adjustment screw clockwise with the Allen key. Refer to 'Adjusting for Monitor Weight' in the Setup section. |
| Monitor springs up or is difficult to push down. | 모니터 무게에 비해 가스 스프링 장력이 너무 높습니다. | Decrease gas spring tension by turning the adjustment screw counter-clockwise with the Allen key. Refer to 'Adjusting for Monitor Weight' in the Setup section. |
| 마운트가 불안정하거나 흔들리는 느낌이 듭니다. | Loose connections or improper wall installation. | Check all mounting screws on the wall plate and VESA plate. Ensure they are securely tightened. Verify the wall can support the mount and monitor. |
| Difficulty with monitor movement (tilt, swivel, rotation). | 관절이 너무 뻑뻑해요. | Some joints may have adjustable tension screws. Loosen slightly if movement is too stiff. Do not over-loosen. |
명세서
- 모델: G120-BLK
- 화면 크기 호환성: 13~34인치
- 중량 용량: 2.2 - 17.6파운드(1 - 8kg)
- VESA 호환성: 75x75mm, 100x100mm
- 경사각: +90° ~ -45°
- 회전 각도: 180°
- 회전: 360°
- 높이 조정: 11인치(28cm)
- 팔 뻗기: 3.5인치(8.9cm) ~ 13.7인치(34.8cm)
- 재료: 알류미늄
- 제품 크기: 16.34 x 2.28 x 6.61인치(41.5 x 5.8 x 16.8cm)
- 품목 무게: 3.96파운드(1.8kg)
보증 및 지원
ONKRON products are manufactured with quality and durability in mind. For specific warranty details, please refer to the warranty card included with your product or visit the official ONKRON web대지.
If you encounter any issues or have questions regarding your ONKRON G120-BLK monitor mount, please contact ONKRON customer support for assistance. Our experts are available to help.
연락처 정보: Please refer to the ONKRON web최신 연락처 정보는 웹사이트 또는 제품 포장을 참조하십시오.
