1. 서론
This manual provides detailed instructions for the installation, operation, and maintenance of your GGStudy 360° Swivel Spout Two Handles 3-Hole 8-16 inch Widespread Bathroom Sink Faucet, Model 16397-ORB. Please read these instructions thoroughly before beginning installation and retain them for future reference. Proper installation and care will ensure optimal performance and longevity of your faucet.
2. 안전 정보
- 수전을 설치하거나 유지보수 작업을 하기 전에 항상 메인 급수 밸브를 잠그십시오.
- 설치하는 동안 안전 안경, 장갑 등 적절한 개인 보호 장비를 착용하세요.
- If you are unsure about any part of the installation process, it is recommended to consult a qualified plumber.
- 연결 부위를 너무 세게 조이지 마십시오. 수도꼭지나 배관이 손상될 수 있습니다.
- Ensure all local plumbing codes are met during installation.
3. 패키지 내용
Verify that all components are present before beginning installation. If any parts are missing or damaged, please contact GGStudy customer support.
- 1 x Faucet Body
- 1 x Pop-up Drain with Overflow
- 1 x 사용 설명서(이 문서)
- 2 x 3/8-inch Supply Lines (Hot & Cold)
- 1 Pair Hot and Cold Handles
- Mounting Hardwares (washers, nuts, etc.)
이미지 3.1: 이상view of all components included in the GGStudy faucet package, including the faucet body, handles, pop-up drain, supply lines, and mounting hardware.
4. 사양
| 특징 | 사양 |
|---|---|
| 상표 | GGStudy |
| 모델명 | 16397-ORB |
| 장착 유형 | Deck Mount, Widespread (3-Hole) |
| 재료 | Brass (Faucet Body), Zinc (Handles) |
| 마무리 유형 | 매트블랙 |
| 핸들 수 | 2 |
| 주둥이 디자인 | 받침 |
| 최대 유량 | 분당 1.2갤런(GPM) |
| 주둥이 높이 | 5.51 인치 |
| 주둥이 도달 | 4.52 인치 |
| 권장 구멍 간격 | 8-16 inches (center to center) |
| 사전 천공 구멍 크기 요구 사항 | 1.25 inches (min) - 1.85 inches (max) |
| 품목 무게 | 4.74파운드 |
Image 4.1: Detailed diagram showing the dimensions of the faucet components, including spout height, spout reach, and the required pre-drilled hole sizes for installation.
5. 설정(설치)
5.1 설치 전 체크리스트
- Ensure your sink has three pre-drilled holes with a spacing between 8 and 16 inches.
- Verify that the hole diameter is between 1.25 inches (min) and 1.85 inches (max). Refer to Image 4.1.
- Gather necessary tools: adjustable wrench, plumber's putty or silicone sealant, screwdriver, flashlight, and a basin 렌치 (필요한 경우).
- Clean the mounting surface of the sink.
5.2 설치 단계
- Prepare the Faucet Body: Apply plumber's putty or silicone sealant around the base of the faucet spout and handles.
- 수도꼭지 주둥이 설치: Insert the faucet spout through the center hole of the sink. From underneath the sink, secure it with the rubber washer, metal washer, and mounting nut. Hand-tighten first, then use a basin wrench to gently tighten.
- 핸들 설치: Insert the hot and cold handles through the left and right holes of the sink. From underneath, secure each handle with its respective rubber washer, metal washer, and mounting nut. Ensure the handles are oriented correctly (hot on left, cold on right) and can rotate freely.
- 공급망 연결: Attach the hot and cold supply lines to the corresponding inlets on the faucet handles and the main faucet body. Ensure a tight seal.
- 물 공급 연결: Connect the other ends of the supply lines to your hot and cold water shut-off valves. Use an adjustable wrench to tighten connections, but do not overtighten.
- 팝업 배수구 설치: Follow the separate instructions provided with the pop-up drain for proper installation into the sink drain hole. Ensure a watertight seal using plumber's putty or silicone sealant.
- 누출 테스트: Slowly turn on the main water supply. Check all connections for leaks. If leaks are detected, gently tighten the connections.
- 수도꼭지를 씻으세요: Remove the aerator from the spout. Turn on both hot and cold water for a few minutes to flush out any debris from the lines. Turn off the water, reattach the aerator, and test the water flow.
6. 사용 설명서
Your GGStudy widespread faucet features two handles for precise control over water temperature and flow, and a 360° swivel spout for convenience.
6.1 물 흐름 및 온도 제어
- The left handle controls the hot water. Rotate it counter-clockwise to increase hot water flow.
- The right handle controls the cold water. Rotate it counter-clockwise to increase cold water flow.
- To achieve desired water temperature, adjust both hot and cold handles simultaneously.
- To turn off the water, rotate both handles clockwise until fully closed.
Image 6.1: Illustration demonstrating the two-handed operation of the faucet, with clear indicators for hot (red) and cold (blue) water control.
Image 6.2: Diagram illustrating both horizontal and vertical handle direction options for opening and closing hot and cold water flow.
6.2 Swivel Spout Function
- The faucet spout can rotate 360 degrees, allowing for flexible use and easy access to different areas of the sink.
7. 유지관리
7.1 수도꼭지 청소
- To maintain the matte black finish, clean the faucet regularly with a soft, damp 옷감.
- 연마성 세제, 독한 화학 약품 또는 수세미는 마감재를 손상시킬 수 있으므로 사용하지 마십시오.
- 잘 지워지지 않는 얼룩은 순한 비눗물에 적셔 물로 깨끗이 헹군 후 부드러운 천으로 물기를 닦아내세요.
7.2 폭기기 유지보수
- 물의 흐름이 제한되거나 불규칙해지면 폭기기가 이물질이나 광물 침전물로 막혔을 가능성이 있습니다.
- 주둥이 끝부분에서 에어레이터를 돌려서 분리하세요.
- Rinse the aerator components under running water to remove any particles. For mineral deposits, soak the aerator in a solution of equal parts white vinegar and water for a few hours.
- 에어레이터를 다시 조립하고 꼭지에 다시 나사로 고정합니다.
8. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 물의 흐름이 적다 | 막힌 통기기, 부분적으로 닫힌 차단 밸브, 공급 라인에 이물질이 있음. | Clean the aerator (see Section 7.2); ensure shut-off valves are fully open; flush supply lines. |
| 연결부 누수 | 연결 부위가 헐거워졌거나 와셔가 손상되었습니다. | Gently tighten connections; replace worn washers if necessary. |
| 수온 문제 | 손잡이 조정 불량; 온수기 문제. | Adjust hot and cold handles as needed; check water heater settings. |
| 손잡이가 뻑뻑하거나 돌리기 어렵습니다. | 카트리지 내부에 미네랄 침전물이 쌓였습니다. | Contact customer support for guidance on cartridge maintenance or replacement. |
9. 보증 및 지원
GGStudy is committed to providing quality products. For specific warranty details, please refer to the documentation included with your purchase or visit the official GGStudy web해당 사이트. 보증 범위는 일반적으로 정상적인 사용 조건에서 발생하는 재료 및 제조상의 결함을 포함합니다.
For technical assistance, missing parts, or any other inquiries, please contact GGStudy customer support directly. When contacting support, please have your model number (16397-ORB) and proof of purchase readily available.
구매 시점에 제3자 제공업체에서 추가 보호 플랜을 선택하실 수 있습니다. 자세한 내용은 다시 확인해 주십시오.view 이러한 계획의 약관은 별도로 명시되어 있습니다.
You can visit the GGStudy store for more information: GGStudy Store on Amazon
