QEP 36" Slimline Manual Tile Cutter User Manual

1. 서론

Thank you for choosing the QEP 36" Slimline Manual Tile Cutter. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your new tile cutter. Please read this manual thoroughly before use and retain it for future reference.

The QEP Slimline Series Tile Cutter is engineered for professional use, designed to cut most ceramic and porcelain tiles up to 36 inches in length. Its unique ultra-slim design, measuring only 5-1/2 inches wide, makes it lightweight and easy to transport. Key features include heavy rubber pads for cutting stability, dual chrome-plated rail bars, and linear ball bearing slides for exceptionally smooth scoring. The cutter is equipped with a durable 7/8 inch titanium-coated tungsten-carbide ball bearing cutting wheel, ensuring long-lasting performance even with hard porcelain tiles. For larger format tiles, the base includes four convenient side arm extensions.

Figure 1.1: QEP 36" Slimline Manual Tile Cutter, showcasin컴팩트하고 견고한 디자인입니다.

2. 안전 정보

Always follow basic safety precautions when using this product to reduce the risk of injury. Read all instructions before operating the tile cutter.

• 눈 보호 장비 착용: Always wear ANSI-approved safety goggles or safety glasses with side shields when operating the tile cutter.
• 장갑을 착용하세요: Protect your hands from sharp tile edges and potential cuts.
• 안정적인 작업 표면: Ensure the tile cutter is placed on a stable, level, and non-slip surface before use.
• 작업 공간을 깨끗하게 유지하세요: Clear the work area of debris and obstructions to prevent accidents.
• 적절한 취급: Handle tiles carefully, as edges can be sharp after cutting.
• 어린이의 접근을 차단하세요: Do not allow children or untrained persons to operate the tile cutter.
• 사용 전 검사: Before each use, inspect the cutter for any damaged or loose parts. Do not use if damaged.
• 올바르게 사용하십시오: Use the tool only for its intended purpose of cutting ceramic and porcelain tiles.

3. 설정

3.1 풀기 및 검사

Carefully remove the tile cutter from its packaging. Inspect all components for any signs of damage during shipping. Ensure all parts listed in the 'Included Components' section (see Specifications) are present.

3.2 Preparing the Work Area

Place the tile cutter on a flat, stable, and clean surface. The heavy rubber pads on the base provide cutting stability, but a firm foundation is crucial for accurate cuts.

3.3 Extending Side Arm Supports

For cutting large format tiles, extend the four side arm extensions located on the base of the cutter. These arms provide additional support to prevent the tile from tipping during the scoring and breaking process.

Figure 3.1: Key features of the QEP Slimline Tile Cutter, highlighting the tile support arms.

4. 사용 설명서

4.1 Preparing the Tile

Measure and mark the desired cut line on your ceramic or porcelain tile. Ensure the tile is clean and free of debris.

4.2 Positioning the Tile

Place the tile on the cutter's base, aligning the marked cut line with the scoring wheel. Utilize the metal rip guide to help measure and hold the tile securely in place, ensuring accuracy during the cut. For diagonal cuts, align the corner of the tile with the scoring wheel.

Figure 4.1: Demonstrating the tile cutting process, suitable for ceramic and porcelain tiles up to 1/2 inch thick.

4.3 Scoring the Tile

Lower the handle so the scoring wheel makes contact with the tile. Apply firm, consistent pressure and push the handle forward along the dual chrome-plated rail bars. The linear ball bearing slides ensure a smooth and precise score line across the entire tile surface. A single, continuous score is generally recommended for best results.

Figure 4.2: Close-up of the scoring wheel, which is a replaceable tungsten-carbide 7/8 inch wheel.

4.4 Breaking the Tile

Once the tile is scored, position the breaking bar directly over the scored line. Apply quick, downward pressure on the handle to snap the tile along the score. The reinforced thick steel base and tile support arms provide stability during this process.

Figure 4.3: Breaking the tile after scoring.

4.5 절단 능력

• Rip Cut: Up to 36 inch tile.
• Diagonal Cut: Up to 25 inch tile.
• Tile Depth: Up to 1/2 inch (13 mm) maximum.

Figure 4.4: QEP 36" Slimline Tile Cutter dimensions and cutting capabilities.

5. 유지관리

5.1 청소

After each use, wipe down the tile cutter with a damp cloth to remove tile dust and debris. Ensure the rail bars are clean to maintain smooth operation. Do not use harsh chemicals or abrasive cleaners.

5.2 Scoring Wheel Replacement

The 7/8 inch tungsten-carbide scoring wheel is replaceable. If you notice a decrease in cutting performance or chipping of tiles, it may be time to replace the wheel. The cutter is compatible with the QEP 21178 Scoring Wheel (sold separately). Refer to the QEP website or product packaging for specific replacement instructions.

5.3 보관

Store the tile cutter in a dry, clean environment, away from extreme temperatures and moisture. Its narrow 5-1/2 inch width makes it less bulky and easy to store.

6. 문제 해결

7. 사양

• 제조업체: QEP
• 부품 번호: 10636Q
• 품목 모델 번호: 10636Q
• 품목 무게: 18파운드
• 제품 크기: 45 x 5.5 x 7 인치
• 전원: 손으로 구동
• 품목 패키지 수량: 1
• 포함된 구성 요소: 1 타일 커터
• 필요한 배터리?: 아니요
• Cutting Wheel: Replaceable Tungsten-carbide 7/8 inch scoring wheel
• Max. Rip Cut: 36인치
• Max. Diagonal Cut: 25인치
• Max. Tile Thickness: 1mm (2/13 인치)

8. 보증 및 지원

For information regarding warranty coverage, product support, or to purchase replacement parts, please visit the official QEP website or contact QEP customer service directly. Contact details can typically be found on the QEP web사이트 또는 제품 포장에 표시되어 있습니다.

Please have your model number (10636Q) and purchase date available when contacting support.